Tender For Advertized Rate List /Bill Of Quantity For Minor Repairs Of Different Schools Under Pm Shri Pab 2025-26.1. Boys High School Khowjabagh Baramulla. @ Rs. 1.00 Lacs2. Boys High School Shumlaran Baramulla. @ Rs. 1.00 Lacs3. Boys High School He
Tender Value
5 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
10000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Quantity For Minor Repairs Of Different Schools Under Pm Shri Pab 2025-26.1. Boys High School Khowjabagh Baramulla. @ Rs. 1.00 Lacs2. Boys High School Shumlaran Baramulla. @ Rs. 1.00 Lacs3. Boys High School Heewan Baramulla. @ Rs. 1.00 Lacs4. Boys High School Fatehgrah Baramulla. @ Rs. 1.00 Lacs5. Boys High School Katiyanwali Baramulla. @ Rs. 1.00 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : |
| 2 | Upto 10 mm thick |
| 3 | Thickness above 10 mm upto 25 mm |
| 4 | Thickness above 25 mm upto 40 mm. |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 6 | Of area beyond 3 sqm. |
| 7 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. (Manually / with Machine Brush Cutter ) |
| 8 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 9 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 10 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 11 | Dismantling of existing wooden ceiling / Flooring including stacking of serviceable material and disposal of unserviceable material as directed with all leads complete. |
| 12 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and five meters height including stacking the material within 50 meters lead. |
| 13 | Dismantling of existing window shutters carefully without breakage including stacking within a lead as directed by the in-charge engineer. |
| 14 | Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 15 | Dismantling wooden ballies in posts and struts including stacking within 50 meters lead. |
| 16 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 17 | Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 meters lead. |
| 18 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead. |
| 19 | Dismantling of C.G.I. sheet roofing and stacking of serviceable material and disposal of unserviceable material within a lead as directed by the in- charge engineer. |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 21 | Demolishing lime concrete manually/by mechanical means and disposal of material within 50 meters lead as per direction of Engineer-in-charge. |
| 22 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 23 | Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix. |
| 24 | Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC. |
| 25 | Demolishing of rubble stone masonry in cement mortar including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC |
| 26 | Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge |
| 27 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:(All kinds of soil) |
| 28 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 29 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 30 | Random Rubble masonry with hard Quarry stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) incl all carriages complete |
| 31 | Dry random rubble masonry with hard stone in foundation and plinth:With bond stone. incl all carriages complete |
| 32 | Excavating, supplying and filling of local Good earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 33 | Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. |
| 34 | 12'' Dia |
| 35 | 18'' Dia |
| 36 | 24'' Dia |
| 37 | 26'' Dia |
| 38 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 39 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: . 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 40 | Providing and laying in position cement concrete of specified grade of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering. |
| 41 | Providing and laying in position specified grade of reinforced cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centering, shuttering, finishing and reinforcement. |
| 42 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) including all carriages and curing complete. |
| 43 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including all carriages and curing complete. |
| 44 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 45 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 46 | Providing and laying cement concrete of mix 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mm nominal size) Crushed in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing and all carriages of material involved but excluding the cost of centring, shuttering and finishing complete. |
| 47 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 48 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriages complete. |
| 49 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 50 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete.Hot finished seamless type tubes |
| 51 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 52 | Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonals braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer, including all carriages. |
| 53 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube incld all carriages |
| 54 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, |
| 55 | Taking out existing Aluminium door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge, including all carriages. |
| 56 | Taking out existing Aluminium Window shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge, including all carriages. |
| 57 | Construction brick massionary manhole with 7.5 class designation bricks in cement mortar 1:4 (1 cement; 4 fine sand) CI cover with frame. foundation concrete 1:3:6 (1cement 3 fine sand 6 graded stone aggregrate 20 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design: as per the directions of site engineer incld all cost and carriage 300x300x450 |
| 58 | 600 x 600 x 750 |
| 59 | 450 x 450 x 600 |
| 60 | 900 x900 x 1050 |
| 61 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 62 | Foundations, footings, bases of columns etc. for mass concrete. |
| 63 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 64 | Suspended floors, roofs, landings, balconies and access platforms. |
| 65 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 66 | Columns, pillars, piers, abutments, posts and struts. |
| 67 | Stairs (excluding landings) except spiral staircases. |
| 68 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 69 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation /plinth & Super Structure including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) carriages involved complete |
| 70 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure including curing and carriages complete in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 71 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners of Imported KD Wood complete job |
| 72 | Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position budloo/fir wood complete as directed |
| 73 | Providing and fixing panelled and glazed 35mm thick shutters for windows and clerestory windows using 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. of KD wood / Silver imported |
| 74 | Providing and fixing Panneled and panneled 35mm thick shutters for doors, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. of KD wood. / Silver /imported |
| 75 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class KD wood. |
| 76 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 77 | Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class Budloowood. |
| 78 | Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class imported wood. |
| 79 | Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First class Popular wood. |
| 80 | Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including providing and fixing of ground frame work (50x25mm or as specified) of first class Budloo wood including cost of screws, wooden plugs, Touchwood etc. complete as per directions of EIC |
| 81 | made from export wood |
| 82 | made from BUDLOO wood |
| 83 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/ fir wood excluding the cost of frame work which is to be paid separately |
| 84 | Changez Khani |
| 85 | Chaar Gul |
| 86 | Chaar Phool |
| 87 | Pahal Gardan |
| 88 | Dawaz-dal-i-girde |
| 89 | Paanch Murabah |
| 90 | Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places. |
| 91 | 4 mm thick |
| 92 | 6 mm thick |
| 93 | 12 mm thick |
| 94 | 19 mm thick |
| 95 | Providing and fixing water proof BWR/ BWP ply wood ISI marked including cost of nails adhesive etc. complete at all places. |
| 96 | 6 mm thick |
| 97 | 12 mm thick |
| 98 | 19 mm thick |
| 99 | Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete at all places. |
| 100 | 6 mm thick |
| 101 | 12 mm thick |
| 102 | 18 mm thick |
| 103 | Providing and fixing of 19mm thick commercial block board at all places including cost of nails and adhesive complete. Thickness/ Pattern/ Design to be approved by EIC. |
| 104 | Providing and fixing of 1mm thick Dulmica/ sun mica sheeting including cost of nails and adhesive complete. |
| 105 | Providing and fixing of ornamental cornice of following size.1st class budloo/imported wood. |
| 106 | 40-50 mm face |
| 107 | 65 mm face |
| 108 | 75 mm face |
| 109 | Providing and fixing of PVC edge beading of size 25x25mm |
| 110 | Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported wood including applying priming coat of approved quality primer. |
| 111 | Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class imported wood. |
| 112 | Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Kail wood. |
| 113 | Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood. |
| 114 | Providing and fixing of wire gauze using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia. 0.63mm for doors windows and clearstory windows including cost of beading complete. |
| 115 | Providing and fixing of MS Mesh 25x25mm wherever required of specified size including cost of beading and nails complete. |
| 116 | Providing and fixing of glass panes with wooden fillets of required size wherever necessary. |
| 117 | Glass panes 3.5mm thick weighing 8.70 Kg / sqm. |
| 118 | Glass panes 4.0 mm thick weighing 10.0 Kg / sqm. |
| 119 | Glass panes 5mm thick weighing 12.5 Kg / sqm. |
| 120 | Providing and fixing of reflective glass panes 4 / 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size. |
| 121 | Providing & fixing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /self-drilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses |
| 122 | 0.63 mm thick with zinc coating not less than 275 gm./Sqm |
| 123 | 0.50 mm thick with zinc coating not less than 275 gm./Sqm |
| 124 | Providing & fixing coated galvalume Hi-rib profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch using self drilling and self tapping fasteners of reputed make with purlins sheet using self drilling and self tapping fasteners incl. ridges/ hips and valleys (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete.. |
| 125 | Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.63 mm thick with Zinc coating not less than 275 gm./Sqm |
| 126 | Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.50 mm thick with Zinc coating not less than 275 gm./Sqm |
| 127 | Providing ridges/ valleys or hips of width 60cm over all width plain Colour coated sheets fixed with nails, G.I limpet washers complete 0.50 mm thick |
| 128 | Providing and fixing plained eaves boarding. 2nd class Deodar wood 300x40 mm (nominal size) |
| 129 | 2nd class kail wood 300x40 mm (nominal size) |
| 130 | Providing and fixing at all height false ceiling including frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zine coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm wide × 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm din x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm e to G.channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every SQM junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long. the perimeter of ceiling fixed to wall/partition including jointing and fixing to a fush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I |
| 131 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and carriages but excluding cost of nosing of steps etc. complete. |
| 132 | 40 mm thick 20mm nominal size stone aggregate (crushed) |
| 133 | 50 mm thick 20mm nominal size stone aggregate (crushed) |
| 134 | Providing and fixing 1st quality ceramic glazed Digital tiles conforming to IS: 13753 of minimum thickness 5mm of approved make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 135 | Providing and fixing 1st quality ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete |
| 136 | Providing and fixing 1st quality Vitrified floor tiles 600x600mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete |
| 137 | 800 x 800 |
| 138 | 1200 x 600 |
| 139 | Providing and fixing of Interlocking/Chequered precast cement concrete tiles colored(rubber finish) in foot paths & courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick layer of dry sand . |
| 140 | 40mm thick. |
| 141 | 50mm thick. |
| 142 | 75mm thick. |
| 143 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints |
| 144 | Size of tile 600x600 mm |
| 145 | Size of tile 800x800 mm |
| 146 | Size of tile 1000x1000 mm |
| 147 | Providing and laying polished anti-skid vitrified floor tiles of various sizes (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work. |
| 148 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 149 | Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding complete at all levels. |
| 150 | (Black Granite-Jet Black) of approved quality. |
| 151 | (Maroon type/similar Granite) of approved quality. |
| 152 | (Green marble) of approved quality |
| 153 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 154 | Raj Nagar plain white marble/Udaipur green marble/zebra black marble 16mm thick |
| 155 | Granite of any colour or shade 18mm thick |
| 156 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 157 | Marble Work |
| 158 | Granite Work |
| 159 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment, including all carriages. |
| 160 | Providing and fixing of laminated board flooring AC4 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete. (to be approved by EIC) 8mm thick |
| 161 | Providing and fixing of MDF cornice 25mmx20mm In size. |
| 162 | 15mm thick cement plaster on brick / concrete wall of mix 1:4 (1cement: 4 fine sand) |
| 163 | 12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 fine sand) |
| 164 | 6 mm thick cement plaster on concrete wall of mix 1:3 (1cement: 3 fine sand) |
| 165 | Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete.18 mm thick |
| 166 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 167 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats |
| 168 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 169 | Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 170 | Providing and applying cemement based wall putty 1mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 171 | Providing and applying cemement based wall putty 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 172 | Removing painting by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 173 | Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 174 | Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 175 | Removing lime punning/POP from walls including sand papering and disposal of rubbish as directed etc. complete. |
| 176 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 177 | Distempering with 1st quality Acrylic/oil bound washable distemper(ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as permanufacturers’ specifications, one or more coats on old work |
| 178 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 179 | Two or more coats on new work |
| 180 | One or more coats on old work |
| 181 | Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade. |
| 182 | New work (two or more coats applied @ 3.84 kg/10sqm) including cost of priming coat @0.80 liter/Sqm |
| 183 | Old work (one or more coats applied @ 2.20 kg/10sqm) |
| 184 | Applying priming coat with ready mixed white primer of approved brand and manufacture on wood work. |
| 185 | Applying priming coat with ready mixed zinc oxide chromate primer of approved brand and manufacture on steel galvanized iron/steel works. |
| 186 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 187 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 188 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 189 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 190 | Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work |
| 191 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 192 | Finishing walls with 100% Premium acrylic emulsion paint havingVOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 193 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish |
| 194 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 195 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead, With cement mortar 1:4 (1 cement: 4 coarse sand), including all Carriages |
| 196 | Providing and applying two or more coats of premium quality metallic roof paint of approved make and shade on existing or new GI/steel roofing sheets, after thorough cleaning of the surface by wire brushing/emery paper to remove rust, dirt, grease and loose scales. The work shall include application of one coat of suitable anti-corrosive metal primer wherever required, followed by two finishing coats of metallic paint, applied by brush, roller or spray to achieve a smooth, uniform and durable finish. The item includes all labour, materials, tools, scaffolding, surface preparation and incidental charges, complete in all respects as directed by the Engineer-in-Charge. |
| 197 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285,( minimum thickness of powder coated 50 microns) fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings The partition shall be fitted with 5 mm thick clear toughened / float glass (or 12 mm pre-laminated board / ACP panel, as specified), including glazing beads, rubber gaskets, approved sealant, screws, cleats, brackets, anchor fasteners, and all necessary hardware, and the directions of Engineer-in-Charge |
| 198 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. |
| 199 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. |
| 200 | Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. |
| 201 | ACP 3.5mm thick of required color |
| 202 | ACP 4.0mm thick of required color |
| 203 | Providing and laying G.S.B. grade including compacting, ramming, watering and carriage complete. |
| 204 | Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete. |
| 205 | Supplying and Filling earth, including carrying by lorry, placing, dressing and ramming in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with ½ tone roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller of minimum 8 tones, filling in ground depressions, Including of all carriages from source to site complete. complete job |
| 206 | Engagement of tipper for removal of mulba etc including fuel charges complete. |
| 207 | Engagement of excavator (JCB) in all terrains including fuel charges complete. |
| 208 | Engagement of hand cart |
| 209 | Providing and fixing of locks Godrej/Link make for ward robe, almirah, drawer |
| 210 | Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes. |
| 211 | 20 mm |
| 212 | 25 mm |
| 213 | Providing and fixing of door closer capsule type of standard make |
| 214 | Providing and fixing of door closer spring type of standard make |
| 215 | Manufacturing and fixing of computer tables of required size and height of 19mm thick solid core ply board, exposed surface to be laminated with Dulmica sheeting including cost of key boards (readymade), racks drawers, cupboards, cost of brass knobs / Godrej locks and other necessary fittings and fixtures of approved quality and make. (Measurements be made on top surface only) 600mm deep |
| 216 | Providing and fabrication of storage Almirah (ornamental) of approved quality 19mm Ply board in sides, shelves and wherever required including 6mm ply wood on back and 19MM pine board ply wood in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed face of approved design and drawings including painting two or more coats of synthetic enamel paint of approved quality and color inside including cost of following aluminum fittings and locks of Godrej/Link make.15mm dia. M.S. pipe chromium plated with necessary brackets 4'-0\\" length and including all other necessary accessories complete in all respects. (For payments front face to be measured). |
| 217 | 60 cm deep |
| 218 | 45 cm deep |
| 219 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer |
| 220 | Supply ,installation , testing and commissioning of 1.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete. |
| 221 | Supply ,installation , testing and commissioning of 1 HP water lifiting motor including all necessary fittings labour charges / dismantalling of old one with all carriages comlete. |
| 222 | Scientific cleaning and sterlization of water storage tanks the job involves six stages of cleaning ie; cleaning and sterlization process consisting of mechanical de-watering high pressure ,cleaning sludge removal ,vaccum cleaning ,anti bacterial spray and finally killing of suspended and fluting bacteria by ultra voilet raidations as directed by engineer in charge. |
| 223 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 224 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 225 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proofcoupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend |
| 226 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 227 | Providing and fixing white vitreous china extended wall mounting watercloset of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 228 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 229 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 230 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 231 | Providing and fixing white vitreous china water closet squatting pan(Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 232 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 233 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 234 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Cera, Parry ware complete. |
| 235 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.610x460mm bowl depth 200mm (standard make approved by EIC). |
| 236 | Providing and fixing 600x450mm beveled edge mirror of specified brand |
| 237 | Providing and fixing beveled edge mirror of specified brand |
| 238 | Circular shape 450mm dia. |
| 239 | Rectangular shape 450x600mm. |
| 240 | Oval shape 450x350mm |
| 241 | Providing and fixing of C.P grating 100mm size. ISI marked complete. |
| 242 | Providing and fixing of G.I pipes (class B pipes Prakash Surya/ Jindal or equivalent) complete with all necessary G.I fittings and clamps including cutting and making good the walls etc. Internal & External work |
| 243 | 15mm dia. Nominal bore |
| 244 | 20mm dia. Nominal bore |
| 245 | 25mm dia. Nominal bore |
| 246 | 32mm dia. Nominal bore |
| 247 | 40mm dia. Nominal bore |
| 248 | 50mm dia. Nominal bore |
| 249 | Providing and fixing of PVC connection with C.P. brass unions |
| 250 | 300mm long. |
| 251 | 450mm long |
| 252 | 600mm long |
| 253 | Providing and fixing ball valve (brass) of approved quality complete (Leader/ Saint/ equivalent Make) |
| 254 | 15mm dia. |
| 255 | 20mm dia. |
| 256 | 25mm dia. |
| 257 | 40mm dia. |
| 258 | 50mm dia. |
| 259 | Providing and fixing gate valve (brass) of approved quality complete (Leader/ Saint Make/ equivalent Make). |
| 260 | 15mm dia. |
| 261 | 20mm dia. |
| 262 | 25mm dia. |
| 263 | 40mm dia. |
| 264 | 40mm dia. |
| 265 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 266 | Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix. |
| 267 | Providing and fixing of C.P. Cups for C.P. fittings. |
| 268 | Providing and fixing of C.I. manhole cover heavy duty of following sizes. |
| 269 | 12\\"x12\\" |
| 270 | 18\\"x18\\" |
| 271 | 24\\"X24\\" |
| 272 | Supply ,installation,testing and commissioning of water heater geysers of approved quality like, (Jaquqr,Racold ) with copper core including cost of dash fasteners with nuts and washers |
| 273 | 50 Litre |
| 274 | 35 Litre |
| 275 | 25 Litre |
| 276 | Providing and fixing Geyser elements (as per Geyser type) |
| 277 | Providing and fixing Geyser thermostat of approved quality complete. |
| 278 | Providing and fixing C.P. brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore short body. |
| 279 | Providing and fixing of 15mm size chromium plated brass pillar cock of approved quality. (Jaguar- continental/Marc/Hindware-contessa plus/equivalent) |
| 280 | Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with wall flange |
| 281 | Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) |
| 282 | Providing and fixing of 15mm size chromium plated cast brass sink mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with flange. |
| 283 | Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality. (Jaguar-Continental/Hindware- contessa plus/equivalent) with flange |
| 284 | P/F Towel ring 20mm dia. (Jaguar-Continental/Hindware-contessa plus/equivalent) with flange |
| 285 | P/F Towel rod (Jaguar- Continental/Hindware-contessa plus/equivalent) |
| 286 | P/F Stainless Steel Soap Dish holder. |
| 287 | Steel Grating |
| 288 | P/F Plastic Soap Dispenser wall mounted of size 400ml |
| 289 | P/F Plastic Tissue Dispenser wall mount of size, shape and colour as approved by engineer in charge |
| 290 | P/F Fully Automatic, coin operated Electronic Sanitary Napkins Vending Machine (50 Napkins Storage Capacity) Made of CRC Anti-Corrosive Powder Coated Steel (MS) wall mount Aluminium Coin Acceptor with Sensor,lockable body of size, shape and colour as approved by engineer in charge |
| 291 | Providing and fixing 600mmx120mmx5mmglass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. |
| 292 | C.P./PVC Long bends of required size of approved quality. |
| 293 | C.P. Waste for wash basin of approved quality |
| 294 | Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type) |
| 295 | 12\\"x12\\" |
| 296 | 18\\"x18\\" |
| 297 | 24\\"X24\\" |
| 298 | Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC. |
| 299 | Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness. |
| 300 | Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. |
| 301 | Inside size 90 x 90 x 90cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
| 302 | Inside size 60 x 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
| 303 | Inside size 45 x 45 x 45cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
| 304 | P/F of Rain Gutter made of superior quality and gauge of tin sheets of different colours including fixing of clamps,nuts,washers etc incl fixing of 75mm dia pvc pipe btype for disposal of rainwater upto all floor levels as directed by eic |
| 305 | Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type \\"B\\") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation incl. all fittings & fixtures complete job |
| 306 | 150mm dia. Pipe |
| 307 | 100mm dia. Pipe |
| 308 | 75mm dia. Pipe |
| 309 | 50mm dia. Pipe |
| 310 | Providing and fixing of PVC pipe, fittings(B-Class) of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as the site Engineer including directed by Door bend/Door Junction/Door Tee 100mm all carriages. |
| 311 | Plain Bend 100 mm |
| 312 | PVC Collar 100 mm |
| 313 | PVC Collar 75mm |
| 314 | Plain Bend 75 mm |
| 315 | Floor Trap 100 mm |
| 316 | Door bend/Door Junction/Door Tee 75mm all carriages. |
| 317 | Reducer 100 x 75 |
| 318 | P/S Trap 100 mm |
| 319 | Door bend/Door Junction/Door Tee 150mm all carriages. |
| 320 | Providing and fixing of Health Faucet/jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories, installation charges and complete in full respect as per the directions of Engineer- in-charge. |
| 321 | Providing and fixing spindle 15mm dia. All types like washer type/disc type etc. |
| 322 | Providing and fixing Mixer leg set (Jaguar/Mark/Cera) |
| 323 | Providing & Replacing of Siphon to flushing cistern Cera/Hindware make |
| 324 | Providing & Replacing of ball cock of flushing cistern without float |
| 325 | Providing & Replacing of ball cock of flushing cistern with float |
| 326 | Providing & fixing of polycarbonate corrugated sheets of approved make incl. cost of nails complete job |
| 327 | Providing & fixing of PVC polycarbonate plain sheets of approved make incl. cost of nails complete job |
| 328 | Providing & fixing of pvc panelling 10mm of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing, and G.I frame work etc complete |
| 329 | Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC |
| 330 | Providing & applying of Touchwood on old work including preparing the surface, rubbing,sand papering all complete job. |
| 331 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 332 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 333 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 334 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 335 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 336 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. |
| 337 | PN-16 pipe , 20mm OD (SDR-7.4) |
| 338 | PN-16 pipe , 25mm OD (SDR-7.4) |
| 339 | PN-16 pipe , 32mm OD (SDR-7.4) |
| 340 | PN-16 pipe, 40mm OD (SDR-7.4) |
| 341 | PN-10 pipe , 50mm OD (SDR-11) |
| 342 | PN-10 pipe , 63mm OD (SDR-11) |
| 343 | Providing and fixing PPR Unions |
| 344 | PPR Union 20mm |
| 345 | PPR Union 25mm |
| 346 | PPR Union 32mm |
| 347 | PPR Union 40mm |
| 348 | PPR Union 50mm |
| 349 | PPR Union 63mm |
| 350 | Providing and fixing PPR ball valves (RAK/ Astral/ Prince or equivalent) |
| 351 | for 25mm dia. |
| 352 | for 32mm dia. |
| 353 | for 40mm dia. |
| 354 | for 50mm dia. |
| 355 | for 63mm dia. |
| 356 | Providing and fixing of thermal insulation over following dia G.I Pipes at all heights. |
| 357 | for 15mm dia. |
| 358 | for 20mm dia. |
| 359 | for 25mm dia. |
| 360 | for 40mm dia. |
| 361 | Providing and fixing C.P. 2 in 1 brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore |
| 362 | Providing & fixing various sizes of 15mm CP Nipples |
| 363 | Providing and laying polymer modified cementitous, elastometric, waterproofing & protective composed of best quality portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder ( Dr. Fixit Pidifin 2K) including carriage of material complete job. |
| 364 | Supply Installation , testing and N o Commissioning of kent pride plus KENT pride plus water Purifier with In-Tank UV Disinfection uto;osomg RO+UF+TDS Control Purification process with a storage capacity of 8 liters and output discharges of 15 It/Hr abd abd external prefitted bowl of same kent brand all complete |
| 365 | P/F of curtains velvet based crewel type/ embroyered silk / cotton nylon mix fabric as directed including stitching charges,cost of eyelets including all carraiges of 1.2m width complete as directed by Engineer incharge |
| 366 | Velvet Based crewel type |
| 367 | Embroyered silk type |
| 368 | Cotton/nylon mix fabric type |
| 369 | P/F curtain rods of stainless steel of required size & pattern of approved make and stainless steel brackets,stainless steel end brackets of required design & pattern with necessary fittings & fixtures complete as directed by Engineer incharge. |
| 370 | Supply wooden roll of Honour board of required size with brass letter writing. (incl. fixing & carriage complete. as directed |
| 371 | Providing/ fixing aluminum composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet, the sheet shall be bent to shaped profiles as required including perimeter extrusion base frame extruded stiffeners 2.5mm to 3mm ss expansion fastners and silicon sealant (dow coming 789) all backup arrangements required for installations including scaffoldings required upto all floor levels complete job. |
| 372 | Providing and fixing of necessry aluminium and stainless steel hardware fittings with necessry screws etc complete in all respects to the satisfaction of incharge |
| 373 | handle 250mmx10mm |
| 374 | handle 150mmx10mm |
| 375 | hadle 125mmx10mm |
| 376 | handle 100x10mm |
| 377 | Stainless steel fittings |
| 378 | tower bolt 300mmx10mm |
| 379 | tower bolt 250x10mm |
| 380 | towe bolt 200x10mm |
| 381 | tower bolt 150mmx10mm |
| 382 | P/F of fixtures of approved make with necessery sctews extra complete in all respects |
| 383 | Brass handle 175mm long |
| 384 | SS Butter fly L drop |
| 385 | Door stopper |
| 386 | Bed socket for almirah |
| 387 | Providing and fixing of Capsule type Door Closer with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm ) |
| 388 | Handle (godrej make) |
| 389 | P/F of film frost of approved brand and manufacture incl all charges complete job |
| 390 | Supply and filling of 2nd class sand into sunken area including hand ramming with all carriages of material involved from nearest source complete job |
| 391 | Writing brass letters and numerals for roll of honour for officials as desired by engineer in charge on wooden boards |
| 392 | 25mm-40mm |
| 393 | 50mm-75mm |
| 394 | 100mm |
| 395 | Supply of Door mats of required size and make as per the directions of engineer in charge |
| 396 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 397 | P/F toughened Glass door fittings |
| 398 | L-Connection |
| 399 | Wheel set |
| 400 | Steel rod incl. steel cannel |
| 401 | Fixed Rod |
| 402 | Door Seal |
| 403 | Providing and fixing of PVC Name Plates, Signages etc at various sizes as per the directions of engineer incharge |
| 404 | P/F of stainless steel telescopic slide drawer channel |
| 405 | 12inch |
| 406 | 16 inch |
| 407 | 18inch |
| 408 | 20inch |
| 409 | 22 inch |
| 410 | P/F Toilet Paper Roll holder stainless steel with lid |
| 411 | Providing & fixing of laminated wooden flooring AC / 4-5 Non scratching type of aapproved quality laid over 06 mm thick thermocoal with 50mm wide skirting / door profile of approved quality Green Panel/ Action Tesa incl. cost & carriage of materials involved complete job |
| 412 | Providing/ Fixing of Zebra cut upfolded panelled blind curtains of superior quality , Design and shade with all accessories/ necessary fittings. Sample to be got approved from competent authority before fixing. Including all carriges involved upto site of work complete.Work to be executed as per the directions of Engineer incharge at site of work |
| 413 | Providing & Supplying of Gas Room Heater of approved quality with electric pulse ignition lighter gas heater with kit - LPG Gas Room Heater incl all carriages with all leads and lifts as per directions of site incharge complete job |
| 414 | Providing and fixing of Warmex 1000/2000 Watts Electric PTC Wall Mount Heater Superb WM incl all carriages with all leads and lifts as per directions of site incharge complete job |
| 415 | Providing and commisioning lighting points incld wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5 Sqmm PVC insulated multi-strand copper wire for lighting sub mains,6 amp 1 way switch,2 mm thick PVC conduit/Channel with bends,junction boxes etc ,6 amp S Pole MCB ,10 amp DP MCB,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in wallls with acessories incld 9Watt LED Bulb |
| 416 | Providing and commissioning heating point incld wiring for heating points in 2 .5 sq.mm PVC insulated multi-strand copper wire and 4 sq.mm PVC insulated multi-strand copper wire for heating sub-mains, 16 AMP switch socket combine,,2 mm thick PVC conduit/Channel with bends, Junction boxes etc , 10 Amp S pole MCB ,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in /over wallls with acessories complete incld all carriages |
| 417 | Supply , Laying and connecting of following FR PVC Insulated Strand copper wire of standard make dully isi marked |
| 418 | 7/0.64 (7/16) Sq.mm |
| 419 | 7/0.44 (7/18) sq. mm |
| 420 | Supply , Laying and connecting ,testing and commissioning of following FR PVC Insulated Copper Wiring |
| 421 | 1.5 Sq.mm |
| 422 | 2.5 Sq.mm |
| 423 | 4 Sq.mm |
| 424 | 6 Sq.mm |
| 425 | 10 sq.mm |
| 426 | 16 Sq.mm |
| 427 | 25 sq.mm |
| 428 | 35 Sq.mm |
| 429 | Supplying and fixing of Medium Class PVC conduit / Channel of standard make dully ISI Marked incl its accessories like bends ,cliffs ,saddles etc to be fixed on walls,incl refacing of walls complete job |
| 430 | (1) 19 mm dia |
| 431 | (2) 25 mm dia |
| 432 | (3) 32 mm dia |
| 433 | (4) 38 mm dia |
| 434 | Supplying and fixing of PVC flexible Pipe |
| 435 | (1) 19/25 mm dia |
| 436 | (2) 32/38 mm dia |
| 437 | Supply and fixing of Lockable PVC Channel of legrend /Eq.amake for housing of various wires/cables |
| 438 | 75 mm |
| 439 | 100 mm |
| 440 | Supply and fixing of MS Steel conduit of standard make dully ISI Marked incl its accessories |
| 441 | (1) 19 mm dia |
| 442 | (2) 25 mm dia |
| 443 | (3) 32 mm dia |
| 444 | Supply and Fixing of following swtches & Sockets of Top Line series of SSK make/ Anchor make /Havels Reo make |
| 445 | 16 Amps Box type S-S Combine |
| 446 | 6 Amp 3/5 Pin Socket with Backlite Hylum Sheet of required size |
| 447 | 6 Amp Switch with Backlite Hylum Sheet of required size |
| 448 | 16 Amp Switch with Backlite Hylum Sheet of required size |
| 449 | 350 watt Electronic fan dimmer with Backlite Hylum Sheet of required size |
| 450 | Indicator (non modular) with Backlite Hylum Sheet of required size |
| 451 | Supply ,cutting ,filing and fixing of backlite hylum sheet |
| 452 | Supply and fixing Ceiling rose |
| 453 | Supply and fixing PVC Block |
| 454 | Supply 10 Amps extension Cards of reputed make |
| 455 | Supply 15 Amps extension Cards of reputed make |
| 456 | Supply and fixing of 15 Amps Top of Top line series of SSK make or Anchor make |
| 457 | Supply and fixing of 6 Amps Top of Top line series of SSK make or Anchor make |
| 458 | Supply and fixing of 16 Amps multiPlug of SSK/Eq.make |
| 459 | Supply and fixing of 6 Amps multiPlug of SSK/Eq.make |
| 460 | Supply and filling of distalled water of standard quality having required gravity for batteries. |
| 461 | Supply and fixing of hanging bell push of reputed make |
| 462 | Supply and fixing of 1- way PVC Box of reputed make |
| 463 | Supply and Fixing of following Switches ,Sockets etc of Modullar series of standard make dully isi marked ,incl p/f cover plate of same make (Legrend /Schinder /GM /ABB /L&T /Eq.make ) |
| 464 | 6 Amps Switches |
| 465 | 6 Amps ,3-Pin Socket |
| 466 | 16-20 Amps Socket |
| 467 | 15 Amps Switch |
| 468 | 32 Amps Socket |
| 469 | 32 Amps Switch |
| 470 | Bell Push |
| 471 | Fan Step regulator |
| 472 | TV Dish Socket |
| 473 | Telephone/Computer Jack |
| 474 | Demmi |
| 475 | indicator |
| 476 | Supply and Fixing of Gang Box of approved make |
| 477 | One way |
| 478 | Two way |
| 479 | Three way |
| 480 | Four way |
| 481 | Six Way |
| 482 | Eight way |
| 483 | Providing and fixing of PVC Modular /G.I Box of standard make dully isi marked to be fitted as per site requirement ,incl recessing refacing of walls complete job. |
| 484 | Supply , Installation , Testing and commissioning of following Ceiling having down rod and connection wire of Bajaj / Usha /Havells /C.G / Syska /Helonix Make fitted as per site requirment incl making of connections |
| 485 | 900 mm sweep Ceiling fan |
| 486 | 1200 mm Sweep Ceiling fan |
| 487 | 1400 mm Sweep Ceiling fan |
| 488 | Supply , Installation , Testing and commissioning of Magic type Ceiling Fan of standard Make isi marked fitted as per site requirment incl making of connections |
| 489 | Supply , Installation , Testing and commissioning of Exhaust Fans Shutter type of standard make dully isi marked fitted as per site requirment incl making of connections |
| 490 | 200 mm Sweep having PVC Body Shutter type Exhaust fans |
| 491 | 300 mm Sweep having PVC Body Shutter type Exhaust fans |
| 492 | Supply , Installation , Testing and commissioning of decorative remote type Wall Fan having double ball bearing of ISI Marked , fitted as per site requirment incl making of connections. |
| 493 | Supply , Installation , Testing and commissioning of Wall Fan having double ball bearing of isi marked , fitted as per site requirment incl making of connections. |
| 494 | 300 mm |
| 495 | 400 mm |
| 496 | Supply , Installation ,testing and commissioning of Following MCB /MCCB's of standard make,isi marked incl making of necessary connections. (Legrend /L&T /ABB/Hugger /Simens / Indo Asian /Havells make (Adjustable type thermo magnetics ) |
| 497 | 6-10-16-20-32 Amps Single Pole MCB (10 KA) |
| 498 | 32-40-63 Amps Single pole MCB (10KA) |
| 499 | 16-20 Amp Double Pole MCB (10K) |
| 500 | 32-40 Amp (10KA) DP MCB |
| 501 | 63 Amp DP (10KA) MCB |
| 502 | 100 Amp DP MCB (10 KA) |
| 503 | 125 Amps DP MCB (10KA) |
| 504 | 32-40 Amp TPN MCB (10KA) |
| 505 | 63 Amp TPN MCB |
| 506 | 100-125 Amp TPN MCB |
| 507 | Supply , Installation ,testing and commissioning of Change over switch of ISI marked make incl |
| 508 | 63 Amps DP Change over switch |
| 509 | Computer Networking and telephone wirings |
| 510 | Supply,Laying,Connecting,Testing and Commissioning of Cat-6 of D-link make cable ,Incl making |
| 511 | Supply,Laying,Connecting,Testing and Commissioning of teelephone wires ,including making |
| 512 | 2-Pair |
| 513 | 4-Pair |
| 514 | 8-pair |
| 515 | 10 Pair |
| 516 | 20 Pair |
| 517 | Supply and fixing of I-O Box of D-Link make |
| 518 | Supply and fixing of Computer Jack RJ45 of Legrend/D-Link make |
| 519 | Supply and fixing of Telephone jack RJ11 of D-Link make |
| 520 | Supply,Installation,Testing & Commissionig of Networking switches ,,Incl making of necessary |
| 521 | 8-Port Unmanaged |
| 522 | 8-Port Managed |
| 523 | 16-Port Unmanaged |
| 524 | 16-Port Managed |
| 525 | 24-Port Unmanaged |
| 526 | 24-Port Managed |
| 527 | Supply,Installation,Testing & Commissionig of Networking Racks ,,Incl making of necessary |
| 528 | 2 U Rack |
| 529 | 4-U Rack |
| 530 | 4-U Rack (Fully loaded ) |
| 531 | 6-U Rack |
| 532 | 6-U Rack (Fully loaded ) |
| 533 | 9-U Rack |
| 534 | 9-U Rack (Fully loaded ) |
| 535 | Supply,fixing,testing & Commissioning of HDMI Cables |
| 536 | 3 Mtr long |
| 537 | 5 Mtr Long |
| 538 | 10 Mtr Long |
| 539 | 15 Mtr Long |
| 540 | 20 Mtr Long |
| 541 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray |
| 542 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 543 | 50 mm width X 25 mm depth X 1.6 mm thickness |
| 544 | Supply and fixing of HDPE pipe (Air Cushion ) |
| 545 | (a) 38-40 mm in dia |
| 546 | (a) 50 mm in dia |
| 547 | (a) 70-75 mm in dia |
| 548 | (a) 100 mm in dia |
| 549 | (a) 125 mm in dia |
| 550 | (a) 150 mm in dia |
| 551 | Supply, Installation ,testing and commissioning of LED Lamps (B22/E27) Warm / Cool, |
| 552 | (a) 9 Watts |
| 553 | (b) 12 Watts |
| 554 | (c) 14-15 Watts |
| 555 | (d) 16 Watts |
| 556 | (e) 18 Watts |
| 557 | (f) 23 Watts |
| 558 | (f) 30 Watts |
| 559 | (g) 36 Watts |
| 560 | (h) 40 Watts |
| 561 | (i) 50 Watts |
| 562 | Supply ,installation ,Testing and Commissioning of 20-22 Watts ,4 ft long LED tube light fitting |
| 563 | Supply ,installation ,Testing and Commissioning of 10-12 Watts ,2 ft long LED tube light fitting |
| 564 | Supply and fixing of 9-10 Watts LED Surface/recess mounted lighting fixtures of having |
| 565 | Supply and fixing of 12-15 Watts LED Surface/recess mounted lighting fixtures of having |
| 566 | Supply and fixing of 18 Watts LED Surface/recess mounted lighting fixtures having Aluminium |
| 567 | Supply, Installation, Testing and commissioning of 1ft x 1 ft 22-24 watt LED surface/recess |
| 568 | Supply, Installation, Testing and commissioning of 2 ft x 2 ft 32-34 watt LED surface/recess |
| 569 | Supply ,Installation ,Testing and Commissioning of 1P 66, 150-200 Watt LED Flood /Street |
| 570 | Supply ,Installation ,Testing and Commissioning of 1P 66, 90-100 Watt LED Flood /Street light |
| 571 | Supply ,Installation ,Testing and Commissioning of IP66 , 45-50 Watt LED Flood / Street light |
| 572 | Supply ,Installation,Testing and Commissioning of 6-9 Wtts LED Bulk head fittings |
| 573 | Ups/ Power invertor's , Batteries & Stabilizers |
| 574 | Supply ,Installation,Testing and Commissioning of 2000 VA Power Invertors of standard make |
| 575 | Supply ,Installation,Testing and Commissioning of 1200-1400 VA -1650 VA Power Invertors of Approved brand |
| 576 | Supply ,Installation,Testing and Commissioning of 750-800 VA to 1000 VA Power Invertors of Approved brand |
| 577 | Supply, Installation, Testing and commissioning of 12 Volts ,120AH-150 AH tall tubular |
| 578 | Supply, Installation, Testing and commissioning of 12 Volts ,180 AH-200 AH tall tubular |
| 579 | Supply and fixing of PVC Trolley suitable for housing batteries |
| 580 | For Housing of Single Battery |
| 581 | for Housing of Two Battery |
| 582 | Supply, Installation, Testing and commissioning of Servo Voltage stabilizers having all inbuilt |
| 583 | 5 KVA (1-Phase IN ,1-Phase Out) |
| 584 | 10 KVA (3-Phase IN ,3-Phase Out) |
| 585 | 15 KVA (3-Phase IN ,3-Phase Out) |
| 586 | 20 KVA (3-Phase IN ,3-Phase Out) |
| 587 | 30 KVA (3-Phase IN ,3-Phase Out) |
| 588 | Supply, Installation, Testing and commissioning of 12 Volts ,26 AH SMF-VRLA batteries |
| 589 | Supply, Installation, Testing and commissioning of 12 Volts ,42 AH SMF-VRLA batteries |
| 590 | Supply, Installation, Testing and commissioning of 12 Volts ,65 AH SMF-VRLA VRLA batteries |
| 591 | Heating Devices & AC's etc |
| 592 | Supply of Electric Blowers of standard make dully isi marked , complete with 3-core lead |
| 593 | Supply of Double rod heaters of Gopi/Nitasha/Eq. make complete with 3-core lead |
| 594 | Supply of Double rod heat pillars of standard make dully isi marked complete with 3-core lead |
| 595 | Supply of 9-Fin Oil filled radiators 2000 Watt with over heating protection of standard make |
| 596 | Supply of 13-Fin Oil filled radiators 2800 Watt with over heating protection of standard make |
| 597 | Supply of Flying insec killer having UV Tube insect catcher Bug zapper repellent machine with |
| 598 | Supply of Mosqulto Killer Rechargeable bat .The job includes providing of replacement |
| 599 | Providing ,Installation ,Testing and commissioning of 1000 Watt Gayser element of recold |
| 600 | Wet servicing of AC's (1 Ton/1.5Ton/2 Ton) |
| 601 | Dry servicing of AC's (1 Ton/1.5Ton/2 Ton) |
| 602 | Servicing and gas filling of AC's (1 Ton/1.5Ton/2 Ton) |
| 603 | Supply ,installation of PC Card of 2 Ton AC of LG/IFB/Panasonic/Diakin make for replacement |
| 604 | Supply ,installation of Compressor for 1.5/2 Ton AC of LG/IFB/Panasonic /Diakin make for |
| 605 | Providing and fitting of 6mm and 10 mm Copper tubes along with insulation |
| 606 | Dismentling of AC's from existing position including lowering down of indoor and outdoor |
| 607 | Supply,Installation,Testing & Commissioning of D.C Invertor Techonology Hot and Cold Air |
| 608 | 1 Ton |
| 609 | 1.5 Ton |
| 610 | 2 Ton |
| 611 | Supply ,Installation ,testing and commision of relay voltage stabilizer (Alumium Wound ) |
| 612 | 4 KVA |
| 613 | Supply and fixing fire extingiuisher ABC type 4.5 Kgs |
| 614 | Providing & fixing of Wall paper of superior quality having plastic coating and of approved design & shade to be fixed on walls with adhesive / chemical based material. All inclusive with cost of wall paper, chemical / adhesive & labour complete. (Sample to be got approved from competent authority) |
| 615 | P/F of 6 mm thick PVC board panelling of approved quality (Green Panel/ Action Tesa) with all necessary fittings includingcost of Nails , cornice etc of approved quality all inclusive with cost of labour , materials and carriages of all involved materials complete job |
| 616 | Engagement of Skilled and un-skilled labors . |
| 617 | Mazdoor. |
| 618 | Carpenter 1st class. |
| 619 | Carpenter 2nd class |
| 620 | Mason 1st class. |
| 621 | Mason 2nd class. |
| 622 | Plumber. |
| 623 | Black Smith. |
| 624 | Providing/ Fixing of acrylic board 5mm thick including letter writing with logo of approved shape, size & design duly approved by engineer incharge. including plywood sheet base of (3'x2'-0\\") and acrylic board of (3'x2') with all accessories like ribbon, sessor, curtain, decoration as per requirement. All inclusive with cost of labour, material & carriages of all involved materials upto site of work complete job (Work to be carried out las per directions of Engineer incharge) for inaugration purpose |
| 625 | Supply of Uniform for cooks, chefs & helpers (Unifrom shall include upper/ Shirt/ Apran Lower/ Trouser / Pent, White Tennis fleet, socks, cap, gloves) |
| 626 | Providing & laying of furnishing of approved quality 1st grade carpet (Kohinoor, Crown) including P/L of Thermocol of superior quality (10mm thickness) with cost/ labour/ carriage and other charges complete job (Sample to be got approved from competent authority before laying of furnishing) |
| 627 | Providing & laying of furnishing of approved quality 1st grade carpet (Khalifa) including P/L of Thermocol of superior quality (10mm thickness) with cost/ labour/ carriage and other charges complete job (Sample to be got approved from competent authority before laying of furnishing) |
| 628 | Providing & fixing of furnishing of approved quality (Iranian wall to wall) including sewing, Stiching sides and fixing with SR solution including cost of 12mm Thermocol complete job. Including all carriages upto site of work (Sample to be approved by competent authority) |
| 629 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior quality including cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority) Grade 1st |
| 630 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior quality including cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority) Grade 2nd |
| 631 | Providing and fixing of Excel matting fixed with SR solutions/ adhesive of superior quality including cost of SR as per directions of Engineer incharge at site (sample to be got approved by competent authority) Grade 3rd |
| 632 | Supply of leather covered 5 seater Sofa set of approved colour, design, size and make with central and side tables including all carriages upto site of work ( sample to be got approved from competent authority) complete job |
| 633 | Renovation / Repair of 5 seat Sofa set (3 seater 1 No, single seater 02 No) including providing springs ,cloth covers/ cushions etc with all carriages upto site of work complete job |
| 634 | Repairs to existing chairs by way of providing necessary screws, nails, foam and leather etc complete |
| 635 | Supply of table with glass top of Superior quality/approved size and shape ( sample to be got approved from the competent authority ) complete job |
| 636 | Supplying Instalation & Commisioning of Luminious AMAZE 3875 / 36 Volt 3500 VA sinewave Inverter for Home, Offices and Shops incl 200 AH Battries (03) No's incl all leads lifts cost & Carriages complete Job |
| 637 | Providing & Fixing of Cocealed warm Lights incl maintence / replacement 18 months (10 Watt) |
| 638 | 15 (watt ) |
| 639 | Clearance of Choaked Sewage line/drains by hydraulic high pressure by way of cleaning manholes by mannual/mechanical means including diaposal of rubish, unhygenic material by mannual/mechanical means as per the directions of site engineer |
| 640 | Providing and spreading of 2nd class sand/silt/Dust in the prade ground to dry up the wet surface of the ground including all carriages upto site of work complete. |
| 641 | Hire charges for Providing / fixing of Pandal water proof with water proof top and crewel ceiling incl side curtains of net including carriage to and fro complete job |
| 642 | Hire Charges for Providing & Fixing of Side Kanath/Curtains/ View cutter over baracating pipes for beautification including all carriages to &fro (for 2 days) |
| 643 | Hire charges for Supply of Plastic Chairs of required size (For 2 days) including all carriages to & fro complete. |
| 644 | Hire charges for Supply of VIP Chairs of required size (For 2 days) including all carriages to & fro complete. |
| 645 | Hire charges for Supply of tables of required size (For 2 days) including all carriagesto & fro complete. |
| 646 | Hire charges for supply of Gas Bukhari including and controlls complete including all carriages to & fro complete. (for 2 days) |
| 647 | Hire charges for Providing of Carpet for Stage and VIP Tent 12' x 10' including all carriages to & fro complete. (for 2 days) |
| 648 | Hire tharges for Supply of Red Excel Mating including all carriages to & fro complete. (for 2 days) |
| 649 | Providing & Fixing of flex banner (1.00m x 3.25 m size) including writing and monogram & return of the same to Divisional store after completion of function |
| 650 | Providing refreshment to Labours/ Helpers and paticipants for practice (Packed Lunch) at venue site and at Venues . |
| 651 | Refreshment at Venue to the guests & VIP's |
| 652 | Dry fruits & mineral water for VIP's (Bowls) |
| 653 | Hire charges for decoration of VIP Lounges/ Buildings on eve of celebration of National days by way of illumination with neon lighting. (All inclusive with hire charges & labour complete job) |
| 654 | Repairing of existing electric fitting points by way of replacing of damaged parts i.e Three pin tops/ Three pin sockets/Switches including replacing of damaged wire Complete. As per the directions of Engg. Incharge at site. Lighting points |
| 655 | Repairing of existing electric fitting points by way of replacing of damaged parts i.e Three pin tops/ Three pin sockets/Switches including replacing of damaged wire Complete. As per the directions of Engg. Incharge at site. Heating Points |
| 656 | Supply and installation of LED Flood lights of aproved make Philips, Havelles, Anchor or equivalent 30 watt including maintenance /replacement period 18 months |
| 657 | Supply and installation of LED Flood lights of aproved make Philips, Havelles, Anchor or equivalent 50 watt including maintenance / |
| 658 | Supply and filling of dry stone soling/GSB/Nallah Muck in foundation trenches/under floors tightly hand packed with mannual consolidation by hand ramming, dressing, watering incld. carriage of material from Source of site |
| 659 | Supply and stacking at site Graded Crushed stone aggregrate of size 63mm-45 mm and stone screening of size 13.2 mm nominal size (type A), stone dust/moorum (Khakbajree) incld laying,spreading and compacting stone aggregrate of specified sizes to WBM specifiacations in uniform thickness (75 mm compacted), hand picking rolling with 3 wheeled road /vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of course aggregrate, watering and campacting to the required density incld all carriages from approved source to site of work complete job(crushed from Broken Quarry). |
| 660 | Clearance of Septic tank by Mechanical/Mannual means including disposal of all un-hygenic material as per the directions of site engineer complete job. |
| 661 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200 x 600mm and secondary cross \\"T\\" of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm Gl adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). including carriages |
| 662 | GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop, made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise) Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical |
| 663 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-1 and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit |
| 664 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-l, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79 with 50 mm resin bonded glass wool backing |
| 665 | 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing |
| 666 | Providing and supplying fresh flower bouquet of premium quality, artistically arranged using seasonal fresh flowers such as roses, lilies, carnations, orchids, gerberas, and suitable green foliage, wrapped in decorative paper/cellophane with ribbon and including a greeting card, complete in all respects as directed by the Engineer-in-Charge |
| 667 | Carriage of material by Mechanical transport from nearest approved source to site of Work Sand avg.lead-10 kms |
| 668 | Aggregate avg.lead-10 kms |
| 669 | Stones avg.lead-10 kms |
| 670 | Bricks for an avg lead of 65 KMs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender