Tender For Construction Of New Panchyat Building At Gp- Nawadih, Block- Gola, District- Ramgarh
Tender Value
99.35 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
2 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Panchyat Building At Gp- Nawadih, Block- Gola, District- Ramgarh
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 4 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 6 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm |
| 9 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 10 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :mmnominal size) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 16 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 18 | Suspended floors, roofs, landings, balconies and access platform |
| 19 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 21 | Stairs, (excluding landings) except spiral-staircases |
| 22 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 23 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 24 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 25 | (b) 12mm to 25 mm dia (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 26 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 27 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 28 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 29 | Providing and fixing factory made P.V.C. door frame of size 50x47 mmwith awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm longbrackets of 15x15 mm M.S. square tube, the vertical door frame profilesto be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer’s specification an direction of Engineerin-Charge. |
| 30 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frameshall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel ofsize 30 mm thickness, 70 mm width out of which 50 mm shall be flatand 20 mm shall be tapered in 45 degree angle on both side formingstyles and 5 mm thick, 95 mm wide PVC sheet out of which 75mmshall be flat and 20 mm shall be tapered in 45 degree on the inner sideto form top and bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lockrail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided asgap insert for top rail & bottom rail, paneling of 5 mm thick both sidePVC sheet to be fitted in the M.S. frame welded/ sealed to the styles &rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on theinterior side of the 'C' Channel using PVC solvent adhesive etc. completeas per direction of Engineer-in-charge, manufacturer's specification &drawing.30 mm thick plain PVC door shutters |
| 31 | Providing and fixing ISI marked aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws etc. complete:125x75x4 mm |
| 32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete :150x10 mm |
| 33 | Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, withnuts and screws etc. complete :250x16 mm |
| 34 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other|sections of approved make conforming to IS : 733 and 1S: 1285 fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions’ie at top, bottom and sides with required DPDMrubber/neoprene gasket etc., aluminium sections shallbe smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,aluminium snap beading for glazing/panelling C.P.brass/stainless steel screws, all complete as per architetural drawings and the directions of Engineer—in-‘Icharge (Glazing, panelling and dash fasteners to be paid!for separately)For shutters of doors, windows & ventilators including 3 providing and fixing hinges/pivots and making provision for fixing of fittings wherever required inlcluding the costof EPDM rubber/neoprene gasket required (fittings shall be paid for separately) - Polyester Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 35 | Providing and fixing glazing in aluminium door, windows,ventilators, shutters and partitions etc, with EPDM rubber/neoprene gasket etc. complete as per the|architectural drawings and the directions of Engineer—in-icharge (cost of aluminium snap beading shall be paid inbasic item) With float glass panes of 4mm thickness |
| 36 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 37 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 38 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). |
| 39 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 40 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 41 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 42 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 43 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With \\"A\\" grade white 15X15cm Tiles. |
| 44 | Providing and laying 60mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in charge. |
| 45 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 46 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 |
| 47 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 49 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 51 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 52 | Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 53 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 54 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 55 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter |
| 57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 58 | Bend 87.5° 110 mm bend |
| 59 | Shoe (Plain) 110 mm Shoe |
| 60 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 61 | Providing and fixing unplasticised -PVC pipe clips of approved designto unplasticised - PVC rain water pipes by means of 50x50x50 mmhard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete 110mm |
| 62 | Providing & injecting chemical emulsion for pre-construction Anti-termite treatment and creating chemical barrier under and all around the coloumpits,wall treanches,basement excavation, top surface of plinth filling,junctions of wall and floor along the external perimeter of building with approved chemical as per IS code As per specification and direction of E/l. |
| 63 | Carriage of Materials |
| 64 | Bricks (10Km) |
| 65 | Coarse Sand (15km) |
| 66 | Stone Chips (15 km) |
| 67 | Stone Metal (15 km) |
| 68 | Earth (2km) |
| 69 | Supplying, fitting and fixing vitreous white glazedearthen ware L.W.C. of parry hindustan or any other1SS approved make with 100mm HCI p trap 15 litres Cl pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipeabout 2m long with one brass coupling and clamps Gl chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm Cl body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/.(A) 580 mm long with 12.5 litre low level PVC cistern |
| 70 | Supplying, fitting and fixing 40 mm high viterous white|glazed earthen ware E.W.C. with \\"p\\" trap of Parry|Hindustan or any other 1.S.S. make including supplying!& fixing 15 litres C.1. mosquito proof low down flushing cistern of approved make with complete fittings withC.I. handle and R.S. or bracket with telescopic flushpipe with brass coupling and plumbers joints spindlestop cock of approved quality weight not less than 450grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other 1.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint qver a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With \\"P\\" trap(b)12.5 lit. low level P.V.C. cistern |
| 71 | Supplying, fitting and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of Hindustan \\"Parry\\" or any other approved ISS make| with 5 Itrs. Capacity C.l. automatic fushing cistern ofreliance for any other ISS approved make with all fittings with C.1. or RS brackets standard size G.I. flush pipe with fitting clamps 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber pointsincluding painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete; ds per speciifcification and direction of E/l. Flat back or standing zorner (600X350mm) |
| 72 | |[supplying fiting and fixing vitreous white glazedearthen ware wash hand basin of parry or hindustan or any other 1.S.S approved make supported on painted C.I OR R.S bracket 32mm C.| brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grames, 32mm PVC water pipe 750mm long with brass coupling with one end andmaking plumber joints etc.all complete as perspecification and direction of E/I. |
| 73 | |Supplying, fiting and fixing gun metal full way valve of} approved quality all complete as per specifcation and direction of E/I. |
| 74 | 20 mm dia |
| 75 | 25 mm dia |
| 76 | 32 mm dia |
| 77 | 40 mm dia |
| 78 | |Providing and fixing brass stop cock of approvedquality all complete as per specification and direction ofE/I.15 mm dia |
| 79 | Cutting drain width wise above GL for laying PVC pipeand restoring brick work in cement mortar (1:4) 12mm cement plaster in C.M. (1:4) with neat cement punning as per specifciation and direction of E/I. (PVC 110mm| |
| 80 | Making holes in wall for laying PVC pipes and restoringthe same all cost complete (PVC pipe 110mm dia) |
| 81 | Supplying all tolls and labour and cutting chajja cornicefor laying PVC pipes and making good the same as per|specification and direction of E/l. (110mm dia PVCpipe) |
| 82 | Supplying, fitting and fixing bathroom fittings ~of]basic |approved make and as per IS specification all cost rate |complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 30% for|labour and Contractors profit) |
| 83 | Pillar cock (long neck) (Basic rate Rs.806.5 + 10% forC.P. & laying charge) |
| 84 | Bib cock - long thread (Basic rate Rs.728.15 + 10% for1 C.P. & laying charge) |
| 85 | Glass shelf (Basic rate Rs.683.55 + 10% for C.P. &laying charge |
| 86 | |32mm dia. PVC waste pipe 750mm long with coupling(Basic rate Rs.62.40+ 10% for C.P. & laying charge |
| 87 | 15mm C.P. nipple with coupling( basic rate Rs.87.2 +10% C.P. & laying charge) |
| 88 | Steel jali - 100mm dia. (Basic rate Rs.48.20 + 10% forC.P. & laying charge |
| 89 | Providing Solvent cement ( basic item - 168 + 10% C.P& laying charge |
| 90 | Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brassrevolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm |
| 91 | Supplying, fitting and fixing C.P. brass towel rail 20mm|X 600mm with bracket container |
| 92 | Supplying, fitting and fixing C.P. brass soap dishcontainer medium quality with screw and hinges etc. |
| 93 | Providing and fixing 15mm dia and 45cm long PVCconnection pipe with heavy quality brass coupling at]both ends etc all complete as per specification anddirection of engineer in charge |
| 94 | Supplying, materials and labour for constructinginspection chamber of designation class 75B brickssize 750mm’ deep, 600X450mm internal dimension|having 250mm wall thickness in cement mortar (1:6)including 12mm cement plaster (1:4) with punning oninside and cement plaster (1:6) with 600X475mm G.1.cover with frame (weight not less than 35kg) alongwithearth work in excavation and 80mm thick PCC (1:3:6),in foundation and refiling all complete as per|specification and direction of E/I. |
| 95 | Construction of septic tank - detailed estimateenclosed- 50 user (without soakpit) |
| 96 | Providing and fixing C.P. brass bib cock of approvedquality'conforming to IS 8931, 15mm dia nominal boreof approved brand C.P. fittings |
| 97 | Providing and fixing PTMT extension nipple 15mm size with 12\\" BSP-thread 70mm length and 30mm breadth and weighing not less than 18gms of approved make |
| 98 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threadedfittings i.e fixing the pipe with clamps at 1Mfr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/l. Concealed work including cutting chases and making good thewalls etc. |
| 99 | 20mm nominal bore |
| 100 | 25mm nominal bore |
| 101 | 32mm nominal bore |
| 102 | External work - 40mm nominal bore |
| 103 | Providing & fixing on wall face unplasticised - Rigid P.V.C. pipes conforming to IS: 13592 Type Aincluding jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 104 | Providing and fixing on wall face unplagsticised- PVC\\" 12.42 |moulded fitting/ accessories for unplagsticised- PVC|rain water pipes confirming to IS: 13592 TYPE]A,including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion, (i)Single socketed pipes |
| 105 | Single Tee with door110x110x110 ,mm |
| 106 | Bend 87.5 degree110 mm bend |
| 107 | Single Push fit coupler |
| 108 | Providing and placing on terrace {at all floor levels)(PVC) Polyethylene water storage tank ISI 12701marked with cover and suitable locking arrangementand making necessary holes for inlet, outlet andoverflow pipes but without fittings and the base support for tank |
| 109 | [Providing and fixing 8mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge |
| 110 | Cutting chajjas or concrete for laying PVC Pipe andrestoring the same with R.C.C. (1:2:4) brick work incement Mortar (1:4) and cement plaster 1:4 as perspecifiction and direction of E/I |
| 111 | Making holes in walls for PVC Pipe and restoring thesame atfer pipe Laying (b) 250mm thick wall |
| 112 | Supplying and fixing PVC fittings of approved makeconfirming to IS : 1729 including supplying nails andbobbins, fixing solutions including earth work ormasonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I. |
| 113 | PVC cowl - 100mm dia. |
| 114 | Floor trap - 100mm dia. |
| 115 | Lubricant |
| 116 | Door piece |
| 117 | Septic tank |
| 118 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 119 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 120 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 121 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal |
| 122 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 123 | Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I. |
| 124 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 125 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform |
| 126 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 127 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 128 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 129 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 130 | Supplying, fitting and fixing of C.1.Cover 600X450mm (weight 25kg) all cost complete JSR basic rate [Rs1 470+14.95% for CP - Page 39 |
| 131 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mmdiameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 132 | Point wiring in PVC conduit, with modular type switch - Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.Group A |
| 133 | Supply and Fixing Light Plug Point with Modular TypeAccessories: Supply and Fixing Gl box with modular plate and cover-in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, paintingetc as required. |
| 134 | Supply and Fixing Light Plug Point with Modular Type;Accessories: Supply and Fixing Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection,painting etc as required. |
| 135 | Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 136 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire |
| 137 | 2x2.5 Sqmm + 1x2.5 sqmm earth wire |
| 138 | 2x4 Sqmm + 1x4 sqmm earth wire |
| 139 | 4x6 Sqmm + 2x6 sqmm earth wire |
| 140 | S/F TP MCB DB:- Supplying and fixing of following way,three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). (All TP MCB DB shall be as per 1S:8623) |
| 141 | 4 Ways (4+12 ways) double door |
| 142 | S/F 'C' series MCB:- Supplying and fixing 240 volts, ‘C'series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. |
| 143 | 6/32A Single Pole |
| 144 | 6/32A TPN MCB |
| 145 | SIF Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection efc as required. |
| 146 | SIF Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular| plate switch box including connections but excluding modular plate etc as required. |
| 147 | ITC Exhaust Fan upto 450 mm sweep: installation of}exhaust fan upto 450 mm sweep in the existing opening,“lincluding making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning_etc as required. |
| 148 | SIF Batten / Angle Holder: Supplying and fixing batten /angle holder including connectieotnc as required. |
| 149 | S.L.T.C of following rating surface mounted LED tube light|fittings suitable for 230V, 50Hz, single phase supply etc.complete as required - 20/22W. LED tube light |
| 150 | Bulk head fitting with 9/10Watt CFL/LED |
| 151 | Supplying, 15/16 Watt LED bulb of approved make |
| 152 | Supplying Exhaust fan of 12\\" (300mm) of aproved make |
| 153 | Supply, installation, testing and commissioning offollowing size ceiling fan 3 blades confirming to1S:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR. PVC insulated: copper wire suitable for 230V, 50Hz, single phase supply etc. complete as required. - 1400mm (56\\") ceiling fan |
| 154 | S.1.T.C. of following rating LED street lighting luminarie die cast housing and toughened glass cover (IP-66 portion) in existing pole/pipe for supply voltage 100-270V.AC, 50Hz. Luminaire shall be confirm to 1S:10322 part -5/section 3-and shall be complete with all necessaryaccessories as required - 60W LED street light |
| 155 | |S.I.T.C. of following rating recess/surface mounted LEDround/square shape down light luminaire with pressure die cast housing for single phase supply Voltage.Luminaire shall be confirm to 15:10322 Part -5/section of IEC:62722 with all necessary accessories as required 15/16W LED round down light - as CL |
| 156 | Gl Earth Pipe Electrode: Earthing with G.I. earth pipe 4.5mtr long , 40mm dia including accessories, and providingmasonry enclosure with cover plate having lockingarrangement and watering pipe etc. with charcol and saltcomplete as required. |
| 157 | Supplying and nlaying 25mm X 6mm G.I. strips at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required (jointing shall be done by overlapping and! with 2sets of G.I. nut bolt & spring washer spaced af50mm) |
| 158 | Providing and fixing 25mm x 5mm G.I. strip on surface or|in recess for connection etc. as required |
| 159 | Provioding and laying 1.1 KV grade aluminium armoured cable as per IS 1554 (Part 1) heavy duty all cost complete!, including cost of brass compression gland, cable jointing and end termination as per specification and directionE/I. |
| 160 | 3.5 core, 35 sq.mm |
| 161 | HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. |
| 162 | (a) From 0.00 M to 50.00 M below G.L. |
| 163 | (b) From 51.0 M to125.00 M |
| 164 | (c) Above 125 M |
| 165 | Supplying, assembling, lowering and fixing invertical position in bore well, unplasticized PVCmedium well casing (CM) pipe of required diaconforming to 1S : 12818, including required hire|and labour charges fittings & accessories etc. allcomplete for all depths, as per direction of]Engineer-in-charge - 200mm nominal size dia |
| 166 | Gravel packing in tube well construction inaccordance with IS : 4097, including providinggravel fine/medium/coarse, in required grading &size as per actual requirement, all complete as per|direction of Engineer-in-charge |
| 167 | Development of tube well in accordance with [S|2800 (part 1) and IS: 11189 to establish maximum|rate of usable water yield without sand content](beyond permissible limit) with required capacity air|compressor, running the compressor for required|tile till well is fully developed, measuring yield of]well by \\"V\\" notch method or any other approvedmethod, measuring static level & draw down etc.by step draw down method, colleting water|samples & getting tested in approved laboratory,ilc disinfection of tubewell, all complete includinghire & labour chargeso-f air compressor, tools &accessoires etc. all as per requirement anddirection of Engineer-in-charge. |
| 168 | Providing & fixing suitable size threaded mild steel]cap or spot welded plate to the top of bore wellhousing/casing pipe, removable as per|requirement, all complete for borewell of 200mmdia |
| 169 | Providing and fixing M.S. clamp of required dia to|the top of casing/housing pipe of tubewell as per|18:2800 (Part-1) including necessary bolts & nutsof required size complete |
| 170 | Providing and fixing bail plug/bottom plug ofrequired dia to the bottom of pipe assembly oftubewell as per IS :2800 (Part-1) 200mm dia |
| 171 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pioes having thermal stability for hot &cold water supply including all CPVC plain & brass|threaded fittings. This includes jointing of pipes &fittings with one step CPVC solvent cement|trenching, refilling & testing ‘of joints complete asper direction of Engineer in charge50mm nominal outer dia pipes |
| 172 | Supplying submersible pumps sets confirming to1S:8034 and motor confirming to 1S:9283 pump)shall be suitable for various delivery head anddischarge with stainless steel pump shaft and|polypropylene/noryl impeller, motor suitable for]working on 415V+10%, 3PH. 50HZ, AC supply|with cable guard, thurst carbon/fiber bearing to}withstand entire hydraulic thrust, water proof]winding shall be provided. the pump set shal be|suitable for direct couplings, pump shall have|suitable outlet as per manufacture design. Antithrust stream lined non return valve shall be|provided with pump. 3 mtr. submrsible copper|conductor cable in single/double run shall be|provided with each pump.Submersible pump set 100mm dia (with|polypropylene/noryl impeller) upto 20 stage - 2.0HP |
| 173 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 174 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 175 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 176 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal |
| 177 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 178 | Providing ‘'and fixing factory made precast RCCperforated drain covers, having concrete of strength not less than M-25 of size 1000X450X50mm reinforced with 8mm dia four nos longitudinal & 9 nos. cross sectionalTMT hoop bars, including providing 50mm dia perforations @ 100 to 125mm cfc. including providing }‘edge binding with M.S. flats of size 50mm X 1.6mmcomplete allas per dlrectlon of E/l. |
| 179 | Supplylng, filling, spreadlng & Ievelling stone boulders of size range 5cm to 20c, in recharge pit in the required thickness for all leads & lifts all complete as per directionof Engineer-m charge |
| 180 | Supplying, ‘filling spreading & levelling gravels of size236 frange 5mm to 10mm in the recharge pit over the existing layer of boulders in required thickness for all leads and lfts all complete as per direction of E/i. |
| 181 | Supply. assembling, lowermg and fixing in vertlu:,alIposition in borewellrecharge pit unplasticized PVCt‘medium well casing (CM) pipe of required dia conforming to IS: 12818 including required hire and labour charges,fittings & accessories efc. all complete for all depths as per direction of Engineer-in-charge 150mm nominal size dla. |
| 182 | Costs of drilling 200mmX165mmx125mtr. Deep borewel in all kinds ‘of soil and rock in rural area for installation of set with Hydraulic DTH rig machine, all complete|CP |including supplying all materials, tools, drilling rig, Air compressor and equipments, as well as fuel lubricants and cost of transportation of rig machine and other vehicles upto the site From 0-50 mtr. |
| 183 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).150 mm dia |
| 184 | Supplying, fitting and fixing 125mm dia UPVC pipe ofapproved quality and make - basic rate + 10% for C.P. and laying charge |
| 185 | GST @18% |
| 186 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender