Tender For Providing, Boring And Installation Of 200 Meter Deep Tubewell Including Pumping Machinery For Water Supply At Ifp Amritsar (New)
Tender Value
36.96 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
5 days left
EMD
75000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Boring And Installation Of 200 Meter Deep Tubewell Including Pumping Machinery For Water Supply At Ifp Amritsar (New)
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 650 mm dia bore with reverse rotary rig in all kind of soil including the cost of consumable stores, fuel oil and transportation of rig to the site complete in all respect. |
| 2 | Drilling of 650 mm dia bore with reverse rotary rig upto 150m depth BGL. |
| 3 | Drilling of 650 mm dia bore with reverse rotary rig beyond 150m depth up to BGL 300 mtr. |
| 4 | Making Electric logging of bore hole with electronic well logger including cost of equipment at site etc. complete in all respects. |
| 5 | Supplying, lowering of MS pipe as per IS: 4270-2001, including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. |
| 6 | 300mm nominal diameter (weight 62.3 kg per meter) 8.00 mm thickness. |
| 7 | 200mm nominal diameter (weight 41.6 kg per meter) 8.00 mm thickness. |
| 8 | Supplying, fixing & lowering of Stainless steel cage type wire wound screen as per IS: 8110-2000 or latest ISI makred duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore (ISI marked). |
| 9 | 200mm steel stainer (slot size 0.75/) 6.30mm thickness |
| 10 | Providing and fixing MS taper/reducer made out of 6mm thick M.S. sheet complete in all respect. |
| 11 | Reducer 300mm x 200mm |
| 12 | Supplying, lowering & fixing of MS special socket to connect S.S. Strainer to MS pipe duly welded with suitable grade welding electrode complete in all respects. |
| 13 | 200mm internal diameter |
| 14 | Supplying and fixing mild steel centering guides made out of 32mm x 6mm thick MS bar complete in all respects. |
| 15 | Supplying , lowering & fixing of Stainless Steel socket as per IS: 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode to lower the strainer into tubewell bore complete in all respects. |
| 16 | 200mm internal diameter |
| 17 | Supplying and fixing bail plug of MS pipe complete with inverted U-hook attached to bottom plug complete in all respect. |
| 18 | 200mm i/d (weight 41.6 kg per meter) 8.0 mm thickness |
| 19 | Supplying and fixing of MS clamp of size 150mm x 12mm made out of MS flat 1.52 m long suitable to fit housing pipe including the cost of Nut & Bolts of suitable size complete in all respects. |
| 20 | Supplying and fixing of well cap having threads to fix on housing pipe complete in all respects. |
| 21 | 300mm internal diameter |
| 22 | Supplying at site wooden box of suitable size with lid & locking arrangement for preserving strata samples collected from the bore. |
| 23 | Supplying and packing at site gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from dust, dirt or the vegetable manner as per IS 4097/1967 with latest amendments. (To be paid as per actual length of pipe) |
| 24 | Development and stabilizing of T/well with air compressor of required capacity as directed by the Engineer-in-Charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-Charge. |
| 25 | Capacity of Air Compressor 500 cfm at 600 PSI |
| 26 | Development and stabilizing of T/well with submersible pump of required capacity as directed by the Engineer-in-Charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-Charge. |
| 27 | Submersible Pump & Machinery |
| 28 | Supply, erection, testing & commissioning of electrically driven, water lubricated submersible pumping set capable of delivering 1800 Ltr of water per minute against a head of 70 meter coupled with electric motor of 35BHP confirming to IS 8034-1976 with NRV complete in all respects including all (civil, electrical & mechanical) works related thereof for tubewell. Make of the pump should be KSB/CROMPTION/KIRLOSKAR as approved by Engineer-in-charge with the following specifications from 16.02 to 16.05: |
| 29 | PUMP: |
| 30 | Submersible pumping set shall be manufactured in accordance with IS: 8034/1976 with up to date amendments. It shall be centrifugal multistage pump havinf bronze impellers, dynamically balancd to ensure cavitations & hunting free performance. The bowl shall be cast iron and shall be capable of eith standing hydrostatic pressure equal to twice the pressure at duty point or 1.50 times of shut off which ever is higher. The impeller shaft shall be of stainless steel and guided with bearing provided with suction case along with strainer. |
| 31 | MOTOR: |
| 32 | The motor shall be totally enclosed squirrel cage induction electric motor & shall be provided with thrust bearing to with stand weight of all rotating parts and hydraulic thrust. The motor shall be provided with suitable device to make care of expansion & contraction of lubricating water inside the motor. The windings of motor shall be accessible to hand after dismantling of motor for repair if required. It shall be capable for 400V+7.50% 3 phase 50 cycle AC supply running BHP of motor @ 2900 RPM. the motor shall be properly sealed so as not to allow any part of liquid to enter into it from either side of the motor shaft. |
| 33 | COLUMN PIPE |
| 34 | Providing and fixing 150mm dia E.R.W. type M.S. column pipe with flanges. Both ends of pipe shall be screwed and fitted with steel flanges, sealed after screwing with the pipes. The flanges shall confirm to BS-10/1962 table-D. The thickness of column pipe shall be of class-B and confirming to IS-1239 with up to date amendments. Suitable increaser shall be provided with the pump. Internal dia of column pipe shall be 1\\"more than the outlet size of pump. Flanges should be suitable for submersible pumping set including the cost of joints rubber insertion, nuts, bolts & washers etc. complete in all respect. |
| 35 | PANEL BOARD: |
| 36 | Panel Board having size 900mm x 750mm x 250mm made of pre-stressed cold rolled sheet (2mm thick) and auto calved painted. The board should comprise of rigid welded structural frames made of structural steel section of not less than 3mm thickness. The board should be smoothly finished & free from flaws. It should have space for providing power meter & light meter. The panel board should have the following flush mounted instruments. (Rate should include of all items from i to xviii below): |
| 37 | STARTER: |
| 38 | To control the motor automatic push button, air break star-delta starter suitable for 40 BHP motor having an adjustable delay relay for automatic change from star to delta in up to 20 seconds, three phase thermal over load relays, tripping & reset device should be provided. The starter shall be of L&T make and shall be suitable for voltage range of 350-415V rating of starter shall be 1.25 times the rating of motor 1 No. |
| 39 | MCCB of 100 AMP. For required load with adjustable thermal overload relays of suitable rating & magnetic relay fixed at 100 Ampere. However, the MCCB should be able to break 5 KV short circuit current. (Make: L&T, Crompton/Havells/GE)1No. |
| 40 | VOLT METER 0-500 VOLTS: |
| 41 | Volt Meter of 0-500 Volts of 4\\"x 4\\"size of suitable range and shall be of high quality Industrial 'A'grade confirming to latest relevant IS specifications. (Make: AE/Motwage/Havells/Yule)1No. |
| 42 | AMMETER 0-100 AMP: |
| 43 | Ammeter of 0-100 Amp. Range of 4\\"x4\\"size, C.T. operated and shall be of high quality Industrial A'grade confirming to latest relevant IS specifications. (Make: AE/Motwage/Havells/Yule)1No. |
| 44 | Selector switch for voltmeter shalll be of Silzer/Kaycee/L&T make 1No. |
| 45 | Selector switch for ammeter shalll be of Silzer/Kaycee/L&T make 1No. |
| 46 | SINGLE PHASE PREVENTOR: |
| 47 | Single phase preventor suitable for checking the negative sequence having built in time relay up to 40 seconds so that this may not be trip while starting on load. Rating of C.T.'s if required may also be indicated/provided. (Make: L&T/Crompton/yule/Minillee)1 set. |
| 48 | Switch fuse unit of 100 ampere rating shall be od Make L&T/MK/SIEMENS)1set. |
| 49 | Indicating Lamps (R.Y.B) shall be of ESS/BEE/concord make 1 set |
| 50 | Thimbles of make Dowell/crmitron(L.S. as required) |
| 51 | Terminal strips 3 no. |
| 52 | Wiring in PVC insulated copper conductor cable left bare(un-sheathed) of size 6 mm 2 with copper thimbles and wire clips (ISI marked) as required as per site. (Make : Finolex/national/Plaza)1No. |
| 53 | Time switch of suitablr rating for fully automatic start/ off central as per time adjustment of L&T/Lk or its equivalent makes 1No. |
| 54 | Voltage balancing relay (Electronic type) with protection for reverse rotating. (Make: L&T/SIEMENS/A.B.B)1NO. |
| 55 | SHUNT CAPACITOR: Power capacitor of 9 KVAR in 415/440 volts oil immersed, self healing, dust proof, hermetically sealed with special epoxy, conforming it IS 2834 duy ISI marked as per PSEB requirement. (Make: Crompton Greaves/power cap/GEC/Shakti/Standard)1No. |
| 56 | ELCB of 63 Ampere rating with a sensitivity of 300MA (Make : Gutts/Bentex/Havells/Dattar)1No. |
| 57 | MAIN SWITCH: Sheet metal/iron clad Tripple pole switch with neutral link of 100 Ampere 415 volts. (Make: L&T/ASSCO/M.K./SSK)1no. |
| 58 | CABLE & CLAMPS: |
| 59 | Submersible cable shall be of the capacity of 16mm sqr. 1.5 time more than the normal capacity to save it from becoming hot and for longer life. It shall also have required number of clamps as per requirement of site, complete in all respects. (Make: Finolex/calama or other equilent make) 16mm sqmm. |
| 60 | Earthing with G.I. wire/rope in G.I pipe partly recessed and partly on surface complete with 150 cm long 50 mm dia G.I earth pipe (Cutting threads and 36 nos. holes, 1 cm dia. To make a mesh around the G.I pipe) and with G.I reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20 kg charcoal & salt mixture etc. up to 14 metre in length including boring & refiling) |
| 61 | Earthing with 7/12 S.W.G (7/2.80 mm dia) G.I. rope in 20 mm dia G.I. pipe with G.I. reducing socket 50mm x 20 mm (up to 14 meter in length) |
| 62 | Providing & fixing D.I Specials for delivery line size 150mm for 1 No. tubewell |
| 63 | SUPPLYING AND LAYING D.I.SPECIAL/FITTINGS AS PER is:9523-2000 (ISI marked with the prior approval of Engineer-in-charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining scaffolding, tools and plants, ropes, guys, etc. complete in all respects. |
| 64 | D.I. special upto 300mm i/d |
| 65 | Supplying and laying C.I. specials as per IS: 1538 complete as desired by Engineer-in-charge conforming to ISI specification. |
| 66 | C.I. special up to 300 mm i/d |
| 67 | providing and fixing C.I/D.I. flanged end, stem of SS (AIS 1410) and bronze (Gunmetal) working parts sluice valve ISI makred 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage (with approva; of Engineer-in-charge) |
| 68 | Class PN-1 as per ISI |
| 69 | 150mm i/d sluice valves flanged |
| 70 | Providing and fixing double air valve ISI marked as per IS-14845 including jointing all carriage complete. |
| 71 | C.I. Double Air Valve (size 50mm) |
| 72 | Providing & fixing S.S Pressure Gauge completion in all respect |
| 73 | Dial diameter 150mm calibration 0-16 kg |
| 74 | Gravel pit cover maid of 6mm thick M.S sheet to coer area between 5ft dia gravel pit and 27\\"x27\\" base plate |
| 75 | Providing and fixing 6\\" dia D/F M.S nipple 1.0 ft long suitable for column pipe & D.I fitting |
| 76 | Providing, stringing out, cutting, jointing and testing of ISI marked D.I. double flanged pipe with screwed flanged as per IS 8329-2000, Class-K9 and laying the same in trenches to correct alignment and gradient jointing with nut bolts and rubber insertion joints with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 77 | 150mm i/d pipeline laid complete |
| 78 | testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.) |
| 79 | RISING MAIN |
| 80 | Excavation by Mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. |
| 81 | Earth work upto 1.5m Depth |
| 82 | All classes of soil except rocky |
| 83 | Providing, stringing out, cutting, jointing and testing of ISI marked D.I. pipe(S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradient jointed with rubber tyton joints fitted complete including all cartage. |
| 84 | D.I. Pipe as per IS 8329 DI-K7 |
| 85 | 200mm i/d pipe lines laid complete |
| 86 | Supplying and laying D.I. specials/fittings as per IS: 9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys etc. Complete in all respects. |
| 87 | D.I. special upto 300mm i/d |
| 88 | Providing & fixing C.I/D.I flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer-in-charge). |
| 89 | Class PN-1.6 as per ISI |
| 90 | 200mm i/d Sluice Valves flanged |
| 91 | Providing, fixing and jointing cast iron surface box for Sluice valve, Air valve, fire hydrant etc. including all carriages complete. |
| 92 | Providing & fixing ISI marked non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt, rubber inserting etc. complete. |
| 93 | Class PN-1.0 as per ISI with gun metal flap |
| 94 | 200mm i/d Non-return valve |
| 95 | Providng and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per 1239) B-class, including cost of specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. |
| 96 | 50mm i/d |
| 97 | Providing, fixing, and jointing ISI Marked Gun-metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildingsdd including all carriages complete. |
| 98 | 50mm i/d gun metal peet valve heavy pattern. |
| 99 | Construction of masonary Sluice valve chamber excluding sluice valve cover as per standard design & drawings of public health department. |
| 100 | Size 0.90m x 0.90m Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender