Tender For Special Repair Estimate From Km. 243/648 To 250/948 And Km 263/798 To 265/598 Of Nh-20 In The State Of Odisha For The Year 2026-27.
Tender Value
1.80 Crore
Estimated cost
Bid Submission
29 Sep 2026
15 days left
EMD
3.61 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Estimate From Km. 243/648 To 250/948 And Km 263/798 To 265/598 Of Nh-20 In The State Of Odisha For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor/ vibrator or power rammers to restore the original alignment, levels and slopes including cost of all materials, labour , T&P , lead and lift , cess etc complete in all respect as per clause no. 3002 of specifications for Road and Bridge Works (5th Revision) and as per direction of Engineer-In-Charge |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness by mechanical means using dozer including cost of all labour, T&P, cess etc required to complete the work in all respect as per clause no. 201 of specifications for Road and Bridge Works (5th Revision) and as per direction of Engineer-In-Charge . |
| 3 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes including cost of all labour,materials, T&P,cess etc required to complete the work in all respect as per clause no. 803 of specifications for Road and Bridge Works (5th Revision) and as per direction of Engineer-In-Charge . |
| 4 | Providing and fixing of retro-reflectorised cautionary, Mandatory and Informatory sign as per IRC. 67 made of class-B Type IV retro reflective sheeting fixed over 2mm thick aluminum sheeting vide clause no. 801.3 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25mm x 3mm angle mounted on a mild steel circular pipe 65 NB.3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 x 45cm x 60cm , 60cm below ground level as per drawing as per approved drawing. The sign shall be maintained as per section 12 of IRC 67 including cost of all labour,materials, T&P, crriage, cess etc required to complete the work in all respect as per clause no. 801 of specifications for Road and Bridge Works (5th Revision) and as per direction of Engineer-In-Charge . |
| 5 | (A) 90 CM Equilateral ltriangle |
| 6 | (B) 60 Cm Circular |
| 7 | (C) 80 x 60 cm rectangular size |
| 8 | (D) 45 x 60 cm rectangular size |
| 9 | (G) 90 cm Octagon |
| 10 | Providing and applying Tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom including cost of all labour, materials,T&P,carriage, cess etc required to complete the work in all respect as per clause no. 503 of specifications for Road and Bridge Works (5th Revision) and as per direction of Engineer-In-Charge . |
| 11 | Providing and laying bituminous concrete Grading-II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 of specifications for Road and Bridge Works (5th Revision) complete in all respects including cost of all labour, materials, T&P, carriage, royalty, cess etc and as per direction of Engineer-In-Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender