Tender For Peripheral Development Of Harabhangi Dam Of Mohana Block (Dam Site Park And Hill Top Development Projects At Harabhangi Dam, Adava, Gajapati).
Tender Value
3.04 Crore
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
3.04 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Peripheral Development Of Harabhangi Dam Of Mohana Block (Dam Site Park And Hill Top Development Projects At Harabhangi Dam, Adava, Gajapati).
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning and grubbing proposed road land including uprooting rank vegetation, grass, bushes, shurbes, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlire and disposal of top organic material not exceeding 150 mm in thickness including unserviceable materials to be used or auctioned with all leads, lifts & delifts on premeasurement including all cost of labour, T&P, cess etc complete excluding GST as per direction of the Engineer in charge. |
| 2 | Earthwork in excavation of foundation in hard soil with all leads & lifts including rough dressing and leveling the bed and disposal of the excavated materials away from the work site with initial lead of 50m and initial lift of 1.50m etc complete including cost of all materials, labour and T&P and cess, taxes of all materials excluding GST required for the work etc. complete in all respect and as per the direction by the Engineer-in-charge. . |
| 3 | Earth work in excavation in hard soil and depositing the excavated materials in filling reaches of channel banks to the required section including breaking clods to maximum 5cm to 7cm size and laying in layers not exceeding 0.3m in depth with all leads, lifts & delifts, all labour charges, T&P, Cess etc. complete as directed by the Engineer-in-charge. (Measurement shall be taken on finished level section) |
| 4 | Filling foundation and plinth with sand including watering and ramming with all labour, T&P etc complete to the required level including cost, carriage, royalty, DMF,EMF,additional charges & cess, taxes of all materials excluding GST, etc complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge. |
| 5 | Cement Concrete M-15 grade with crusher broken black hard granite 40 mm size down graded chips of approved quality, mixing by concrete mixer and placing in position including hoisting and laying with all leads, lifts and delifts compacting with vibrator including cost, conveyance, royalty, EMF, DMF, loading and unloading of all materials, dewatering, curing, labour & cess, excluding GST etc. complete in all respect as per approved design, drawing, specification and direction of Engineer-in-charge. |
| 6 | Random rubble H.G. stone masonry in cement mortar (1:6) in foundation and plinth with blasted and quarried granite stone of size 15 to 30cm its all lead, lift including cost, conveyance and royalty EMF, DMF & Additional Charges, taxes of all material excluding GST, all labour charges etc complete as directed by the Engineer in charge. |
| 7 | Reinforced Cement Concrete M-15 grade with crusher broken black hard granite 20 mm size down graded chips of approved quality, mixing by concrete mixer and placing in position including hoisting and laying with all leads, lifts and delifts compacting with vibrator including cost, conveyance, royalty, EMF, DMF, loading and unloading of all materials, dewatering, curing, labour & cess, excluding GST etc. complete in all respect as per approved design, drawing, specification and direction of Engineer-in-charge. |
| 8 | Reinforcement Cement Concrete M-25 grade with crusher broken black hard granite 20 mm size down graded chips of approved quality, mixing by concrete mixer and placing in position including hoisting and laying with all leads, lifts and delifts compacting with vibrator including cost, conveyance, royalty, EMF, DMF, loading and unloading of all materials, dewatering, curing, labour & cess, excluding GST etc. complete in all respect as per approved design, drawing, specification and direction of Engineer-in-charge. |
| 9 | Providing rigid centering and shuttering for RCC work including flase works and dismantling then after casting including cost of all materials excluding GST but including labour , T&P, cess etc complete as directed by the Engineer in charge. (For RCC floor, slab and Chajjas). |
| 10 | Supplying, fitting including straightening, cutting, bending, shirting, binding the M.S. or HYSD reinforcement bars for R.C.C. work and tying the grills and placing in position including cost, conveyance of M.S. or HYSD reinforcement bars and binding wires of 18 to 20 gauges, loading, unloading incuding cost, carriage, labour, cess and taxes and all materials excluding GST etc complete as per approved design, drawing, specification and the direction of the Engineer-in-charge. |
| 11 | Fly Ash Brick work with Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/Sq.cm with dimensional tolerance +/- 8% in cement mortar (1 : 6 ) for all heights and depths with all leads, lifts & delifts including cost, conveyance, royalty, EMF, DMF & Additional Charges taxes etc.of all materials excluding GST, all labour charges, T&P, watering and curing, scaffolding, Cess etc. complete as directed by the Engineer-in-charge. |
| 12 | Providing fitting & fixing of AI door with anodized AI door section of 9202 as vertical member,9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip No.4660 and the frame to be completed bymeans of jointing angle No.1855, hire charges of drilling machine, etc. complete with 12mm size pre-laminated board including cost of all labour charges & cost of all materials excluding GST, T&P, Cess etc. complete as directed by the Engineer-in-charge. |
| 13 | Supplying, fitting, fixing of window (sliding type) made up of aluminium section 9778 as windows frame section no.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement, all fittings including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 14 | Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mm x 32 mm x 2 mm in 3 row in stair case as per approved design, specification, buffing, polishing including cost, conveyance, taxes etc. of all materials, all labour charges, T&P, cost of all materials excluding GST, Cess etc. complete as directed by the Engineer-in-charge. |
| 15 | 12 mm thick cement plaster in cement mortar (1:6) with approved quality sand free from any other deleterious materials over brick masonry including finishing to smooth surface with all lead, lifts & delifts including cost, conveyance, royalty, EMF, DMF & Additional Charges, taxes of all materials excluding GST, all labour charges, T&P including watering & curing, Cess etc. complete as directed by the Engineer-in-charge. |
| 16 | Fixing ceramic tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1cement : 1sand jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding rubbing and polishing complete excluding cost of precast tiles with all leads, lifts & delifts including cost, conveyance, taxes & royalty, EMF, DMF & Additional Charges taxes etc. of all materials excluding GST, all labour charges, T&P, Cess etc. complete as directed by the Engineer-in-charge. |
| 17 | Fixing ceramic tiles in dadoo skirting and raisers (for wall tiling) on 12mm thick cement plaster with cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete, with all leads, lifts & delifts including cost, conveyance, royalty, EMF, DMF & Additional Charges taxes etc. of all materials excluding GST, all labour charges, T&P,Cess etc. complete as directed by the Engineer-in-charge. |
| 18 | Providing & laying factory made chamfered smooth edge cement concrete paver blocks of required strength, thickness & size/shape made by table vibrator method to attain superior smooth finish using PU or equavalent moulds laid in required gray colour & pattern over 50mm thick compacted bed of coarse sand , compacting and proper embeding / laying of inter locking paver blocks in to the sand bedding layer through vibrator compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in foot path, parks, lawns, drive ways or light traffic parking etc. as per manufacurer's specification including cost, conveyance, taxes of all the materials excluding GST, required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 19 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finish and smooth and even surface to receive painting including cost of scaffolding staging charges with all materials, T&P, all labour charges, taxes of all materials excluding GST, Cess etc. complete as directed by the Engineer-in-charge. |
| 20 | Distempering over wall surface and ceilings two coats with approved quality distemper of approved shade including cost of scaffolding, staging charges with cost of all materials, labour charges & T&P, taxes of all materials excluding GST, Cess etc. complete as directed by the Engineer-in-charge. |
| 21 | Finishing wall surface with water proofing cement paint of approved shade two coats on old work to give an even shade including cost of scaffolding and staging charges with all leads, lifts and delifts etc. including cost, conveyance, taxes etc. of all materials excluding GST, all labour charges, T&P etc. complete as directed by the Engineer-in-charge. |
| 22 | Providing, fabricating and installing life-size Gorilla statue (approx. 2.4 m height) made of Fiver Reinforced Plastic (FRP) with internal Steel (MS) tubular frame (min 40-50 mm dia, 2-3 mm thick), fixing over RCC Pedestal (M20 grade & anchoring using MS anchor bolt of 16mm dia including loading, transportation, unloading, erection & commissioning ( Big size Gorilla, approximately - 8'' high) with sitting bench and shelfie pose) taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 23 | Providing, fabricating and installing life-size deer family comprising of four numbers of deer statue (Consisting of two adults, On Mid age and One infant) and of height ranging from 1.2 m to 0.3m height) made of Fiber Reinforced Plastic (5 to 6 mm thickness) with internal light MS rod reinforcement & UV resistant automotive paint fixing over PCC base each of sixe 0.3x0.3x0.3m including loading, transportation, unloading erection & commissioning and taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 24 | Providing, fabricating and installing life-size Giraffe and of height 2.8m made of Fiver Reinforced Plastic (6 to 8 mm thickness) with MS pipe frame & weatherproof textured paint, fixing over RCC base of size 0.6x0.6x0.6 m with anchor bolting & grouting including loading, transportation, unloading, erection & commissioning, taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 25 | Providing, fabricating and installing life-size decorative swan/ duck units (height 0.5-08m) made of Fiber Reinforced Plastic ( 4 to 5mm thickness) with weatherproof textured paint over PCC base of Size 0.3x0.3x0.3m, fixing with adhesive/Anchor bolt Including loading, transportation, unloading, erection & commissioning, taxes of all materials excluding GST etc complete as per direction of the Engineer in charge. |
| 26 | Providing, fabricating and installing life-size crocodile and of length 1.8 m to 2.2m made of Fiber Reinforced Plastic (6 mm thickness) with reinforced internal ribs, weatherproof & anti-fungal textured paint, fixing over PCC base covering the length of sculpture with anchor bolting including loading, transportation, unloading, erection & commissioning, taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 27 | Providing, fabricating and installing of FRR/HDPE moulded frog/ Mushroom unit of height 0.3 to 0.4 m with child safe rounded edges, UV resistance textured paint embedded over PCC base of size 0.3x0.3x0.3m fixing with adhesive/ Anchor bolt including loading, transportation, unloading, erection & commissioning , taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 28 | Providing fabricating and installing double sided see-saw of length 3 meter with MS Pipe (80 to 100 mm dia, heavy duty), Oil sealed ball bearing system, seats made of HDPE/FRP Moulded with handle, embedded over RCC block (0.6mx0.6mx0.6m) including loading, transportation, unloading, erection & commissioning, taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 29 | Providing, fabricating and installing of swing set (in pairs) of height 2.4m to 3.0 m and spach 2.5m, the frame of the swing set made of GI pipes of minimum dia 65mm, the chain of the swings are of Galvanized iron and seats are of HDPE rubber coated, including foundation, including loading, transportation, unloading, erection & commissioning and taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 30 | Providing and fixing children climber (height-2.0 m, base 2.5 m dia) fabricated from galvanized MS pipes, having approximate developed length of members 12-14 m, with anti-corrosive coating, fixed over RCC footing, including loading, transportation, unloading, erection, taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 31 | Providing and fixing of open individual gym equipment (Air Walker/Twister/SKI Trainer/ Rowing Machine/Cross Trainer/Chest Press/Shoulder Wheel/Leg Press/Sit-Up Bench/Pull-Up Bar) as per site requirement made of heavy duty, MS pipes with powder coating, stainless steel bearings installed over RCC base (0.6mx0.6mx0.6m) including loading, transportation, unloading, erection & taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 32 | Providing FRP water boats (length 1.8-2.2 m. capacity 2-3 children). Made of marine grade FRP with anti-skki seating including loading, transportation, unloading & taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 33 | Providing and fixing FRP/HDPE sliders (height 1.8-2.4, m) with MS ladder, safety rails, powder coated finish, fixed over RCC base including loading, transportation, unloading & taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 34 | Providing and installing decorative fountain (Dia 2.5-3.0M) including pump (1-2HP), piping, nozzles, electrical fittings, complete installation including, loading, transportation, unloading & taxes of all materials excluding GST etc complete as per the direction of Engineer-in-Charge. |
| 35 | Providing and fixing RCC benches (1.5-1.8 m length)/ dustbins (40-60 L capacity)/ FRP murals (Different animal figure) each item with weather proof finish, fixed over PCC base including loading, transportation, unloading & taxes of all materials excluding GST complete as per the direction of Engineer-in-Charge. (Garden benches, Use me dustbins, Murals( different Animal figures). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender