Tender For Special Repair/Replacement Of Unserviceable Electric Wiring For Boys And Girls Hostel At Aps Beas Under Ge Kapurthala
Tender Value
28.58 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
18 days left
EMD
57160
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Unserviceable Electric Wiring For Boys And Girls Hostel At Aps Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repair/replacement of unserviceable electric wiring for boys and girls hostel at APS Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 3 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC (FRLS) insulated copper conductor common earth and connecting to earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch , socket, switch socket combination and fan regulator including providing Modular cover plate of required size/ suitable modules capacity complete all as specified and as directed. Note:- Rated quoted deemed to be included Modular Cover plates of suitable size, Sunk Cast pressed steel metal flush mounting box of suitable size) |
| 4 | One light point controlled by one 1-way switch complete all as specified and directed. |
| 5 | One ceiling / exhaust fan point controlled by one switch including connecting the exisitng fans/ exhaust complete all as specified and directed. |
| 6 | One three pin socket out let 5 amps on independent board complete all as specified and directed. |
| 7 | One three pin socket out let 5 amps on same board complete all as specified and directed. |
| 8 | One call bell point controlled by one bell switch complete all as specified and directed. |
| 9 | One 2 way light point controlled by two 2 way switches complete all as specified and directed. |
| 10 | - ditto - all as per item No 2 above but with 2.5 Sqmm (Nominal area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 11 | S&F of switch piano modular type 6A 240 volts complete all as specified and directed. |
| 12 | S&F of switch piano modular type 15A 240 volts complete all as specified and directed. |
| 13 | S&F of socket outlet modular type 2 in 1, 3 pin, 5/6 amp with shutters complete all as specified and directed. |
| 14 | S&F of socket outlet modular type 2 in 1, 3 pin, 5 and 15 amp with shutters complete all as specified and directed. |
| 15 | S&F of switch piano modular type 2 way 6 Amps complete all as specified and directed. |
| 16 | S&F of bell push switch pianomodular type 5 Amps SP complete all as specified and directed. |
| 17 | S&F of ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as specified and directed. |
| 18 | S&F in repair modular fan regulator step type 120W, 2 module complete all as specified and directed. |
| 19 | Taking down old unsv flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 20 | S&F in repair LED batten tube light (4ft) for surface and pendant applications.18/ 20 watt, Colour Temp 3000 K / 5000 K all as directed connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 21 | S&F in repair LED decorative wall lights 20 W 230 V complete all as specified and directed. |
| 22 | Taking down old unsv lamp holder & S&F Lamp holder, PVC/Polycarbonate angular type with LED lamp base B-22 (holder type) 7 watts complete all as directed |
| 23 | S&F in repair call bell, ding dong AC 230 Volts, single phase complete all as specified and directed. |
| 24 | S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. |
| 25 | S&F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with complete all as specified and directed. |
| 26 | S&F of ceiling fans complete with blades, down rods, electronic modular regulator 2 module and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with copper wound complete all as specified and directed. Note:- Rate for taking down UNSV C.fan & trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in this rate. |
| 27 | S&F of metallic heavy duty exhaust fan copper wound with double ball bearing continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 rpm, 230V complete all as specified and directed. |
| 28 | S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm, with fixing arrangements & making hole of suitable size if necessory, complete all as specified and directed. |
| 29 | S&Fof sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, earth bar, double door SPN 8 way 230 volts complete all as specified and directed. |
| 30 | S&F of TPN horizontal type, 4 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-54 DB's IK-09 flush mounted with 200 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCB 100 Amps, four pole as incomer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor complete all as specified and directed. |
| 31 | MCB TPN 240 volts 25- 100 Amps, 16KA, B-series complete all as specified and directed. |
| 32 | S&F of single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp complete all as specified and directed. |
| 33 | S&Fof MCB single pole 240 volts 6-32 Amps, 10KA, B-series complete all as specified and directed. |
| 34 | S&F of MCB SPN 240 volts 0- 32 Amps, 10KA, B-series complete all as specified and directed. |
| 35 | Taking down old unsv sub main and M&L for sub main wiring with two runs (RYB colour for Phase and black for neutral) of single core PVC insulated, unsheathed copper conductor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting, chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note:- (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.(iii) Concealed wiring if nit technically feasible, contractor will provide the surface mounted submain wiring with PVC conduit and other fitting at the discretion or Engineer-in-charge at no extra cost. |
| 36 | Taking down old unsv sub main and M&L for sub main wiring with four runs (RYB colour for different phase and Black for neutral) of single core PVC insulated, unsheathed copper conductor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting, chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note:- (i) Five runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.(iii) (iii) Concealed wiring if nit technically feasible, contractor will provide the surface mounted submain wiring with PVC conduit and other fitting at the discretion or Engineer-in-charge at no extra cost. |
| 37 | Taking down old unsv sub main and M&L for sub main wiring with four runs (RYB colour for different phase and black for neutral) of single core PVC insulated, unsheathed copper conductor, multi stranded cable of size 10.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting, chasing and making good etc including one run of 10.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note:- (i) Five runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.(iii) (iii) Concealed wiring if nit technically feasible, contractor will provide the surface mounted submain wiring with PVC conduit and other fitting at the discretion or Engineer-in-charge at no extra cost. |
| 38 | S&F of electric water heater, storage type ABS body with metalic inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, automatic thermal cut-out and multi function valves, NRV, 450 mm brass connection pipe etc; complete all as specified and directed. |
| 39 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on complete all as specified and directed. |
| 40 | Supply, install, testing and commissioning of LT distribution panel (CPRI type tested) cybicle type IP-65 , outdoor type confirming to IS-61439 factory fabricated prewired made out of 3.15 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories/ fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB ad TPN bus bars and outgoing feeders. The TPN bus bars shall be insulated with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision of termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of plateform. The plateform of LT Panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class 'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed by the Engr-in-Charge. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene Adhesive type gasket shall be used to make panel vermin proof and comprising of following :- (a) Aluminium bus bar of capacity 300 Amps for phase and 200 Amps for Neutral.(b) Integrated smart multifunction meters(MFMs) broadcasting V, I, F, KW, KVA, KWH and THD over Mod bus / IoT Gateway. |
| 41 | Incoming:- (i) MCCB 4P 160 Amps, 25 KA 415 Volts 4 pole (Adjustable and microprocessor release- 01 No Outgoing:- (i) MCCB 4 pole 63 Amps 16 KA 415 Volts - 03 No.(ii) Taking down energy meter of any capacity including connection and refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender