Tender For Repair, Maintenance And Replacement Of Steel Tubular Poles, Light Brackets, Solar Street Lights, Junction Boxes, Feeder Pillar Boxes, And Other Allied Works At Old And New Navy Nagar Under Ge(Nw) Navy Nagar, Colaba, Mumbai.
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
19 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maintenance And Replacement Of Steel Tubular Poles, Light Brackets, Solar Street Lights, Junction Boxes, Feeder Pillar Boxes, And Other Allied Works At Old And New Navy Nagar Under Ge(Nw) Navy Nagar, Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old unserviceable security light fittings roadway lumanarie type from any height and Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 100 lumens/Watt) min wattage 90 watt, with ingress protection IP 65/66 and SPD of capacity 5 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 2 | Taking down old unserviceable security light fittings roadway lumanarie type from any height and Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 100 lumens/Watt) min wattage 120 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 3 | Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 100 lumens/Watt) min wattage 120 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 4 | Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 100 lumens/Watt) min wattage 200 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 5 | Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 100 lumens/Watt) min wattage 250 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 6 | Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 100 lumens/Watt) min wattage 350 watt, with ingress protection IP 65 and surge protection device of 10 KV capacity etc incl necessary, angle iron supports , clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 7 | Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 100 lumens/Watt) min wattage 400 watt, with ingress protection IP 65 and surge protection device of 10 KV capacity etc incl necessary, angle iron supports , clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. |
| 8 | Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of red oxide primer all as directed incl dismantling old one . NOTE :- Earth work, Cement concrete in foundation, coping etc will be measured and paid separately under relevant item. |
| 9 | Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11.0 metres long) including two coats of aluminium paint over a coat of red oxide primer all as directed incl dismantling old one.NOTE :- Earth work, Cement concrete in foundation, coping etc will be measured and paid separately under relevant item. |
| 10 | Supply, laying and commissioning, testing armoured heavy duty electric cable with copper conductor, 1100 volts grade of size 4 sqmm 4 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles/bottle lugs and taking out old u/s damaged cables. |
| 11 | All as per item No- 10.00 here in before but of size 2.5 sqmm 3 core including taking out old u/s damaged cables. |
| 12 | All as per item No- 10.00 here in before but of size 1.5 sqmm 2 core including taking out old u/s damaged cables. |
| 13 | M&L for PCC 1:4:8 type D2 with 40 mm graded aggregate as in foundation complete. |
| 14 | M&L for PCC 1:3:6 type C1 with 20 mm graded aggregate for coping of poles and stay including form work. |
| 15 | S & F astronomical Timelite distribution board IP-54 with contactor, relay and prewired, 32A, 3 pole, 230 Volt , and Astronomical programmable time switch with backup of 6 years, 28 memory locations, current capacity 16 A with one CO time switches for street light complete. |
| 16 | S & F in repairs digital time switch 3 phase of current capacity 16 Amps incl any type of accessories with suitable capacity of contactor after taking out unserviceable one. |
| 17 | S & F in repair 3 pole power contactor with coil voltage 230 volt AC of current carrying capacity 32 to 40 Amps complete including control wiring thimbles etc complete all as directed. |
| 18 | Taking out old U/S earthing any type and M & L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth strip 32 X 6mm by means of bolts, nuts and washers of galvanized iron or steel upto the test point all as shown in electrical plate No.3 of SSR Part-I connected toExisting earth strip including PCC earth pit with CI cover, GI funnel with wire mesh, GI protection pipe of 40 mm dia for earth lead and 20mm GI pipe for watering, excavation and earth work in any type of soil, filling the pit with charcoal and common salt surrounding the earth plate complete all as specified and directed by Engr-in-Charge including testing on completion. Note : Rate quoted for earth strip and GI protection pipe upto 7.5 Rm . |
| 19 | S&F loop-in/loop-out box of outer size size 225mmx295mmx122mm made out of FRP(Hot moulded type) with weather proof canopy and locking screws along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box, duly fixed to to steel tubular/rail/PCC/RCC pole using 25 x 3mm aluminium clamp not less than, including suitable gland and lugs for connecting cable complete all as directed including dismantling old one. |
| 20 | S&F street light bracket bend to shape made as required of 32/40mm dia 1 mtr long GI pipe light grade fixed to pole/wall with flat iron clamp of size 40x6mm two number with the help of nuts and bolts for fixing of street light fitting including making all electric connection including taking out old one complete all as specified and as directed. |
| 21 | Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables . |
| 22 | All as per above item No.21 above but exceeding depth 1.5 mtr and n exceeding 3 mtrs. |
| 23 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils. |
| 24 | Removing excavated material from the site of work and transporting out of Station/site of work suitable to the contractor all as specified. |
| 25 | Cutting existing road surfaces or hard standing 0.45 mtr depth (22 thick comprising bituminuous topping) for laying of pipes/cables complete all specified and directed. |
| 26 | Material and labour for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), for filling and finished surface without using extra cement. |
| 27 | Supplying and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 35 sqmm 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables. |
| 28 | All as per Item No-27.00 here in before but of sizes, 25 sqmm, 3.5 core. |
| 29 | All as per Item No-27.00 here in before but of sizes, 16 sqmm, 4 core. |
| 30 | All as per Item No-27.00 here in before but of sizes, 10 sqmm, 4 core. |
| 31 | All as per Item No-27.00 here in before but of sizes, 10 sqmm, 2 core. |
| 32 | M&L for 50mm dia High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface all as specified and directed. Make: |
| 33 | M&L for GI pipe ,light grade 50mm dia for road crossing or in hard standing for protection of cable above or under ground surface including taking out old one all as specified and directed. |
| 34 | M&L for feedder pillar box (size 1.0 x 0.8 x 0.3 Mtr) factory made pedestal cubical double door outdoor type, CPRI approved, modular construction fabricated out of 3.15 mm thick MS sheet, epoxy powder coated to give superior finish, totally enclosed, dust and vermin proof with locking arrangement (compartment wise) front & back side opening system including rain shed 15 cm all around, platform mounted having minimun clearance of 450 mm above ground level suitable for 415 Volts 3 phase 4 wire system 50 Hz supply, having ETP grade copper busbar strip (three phase & neutral) duly tapped in colour coded FRP sleeves install on porcelain /epoxy insulator, floor mounted type based on angle iron frame and legs 40x40x5 mm thick and having locking arrangement with 50 mm lock make Navtal or Harrison with three keys and including grouting of panel with necessary PCC work complete all as specified. The scope of work including provision of housing the following accessories:-Incoming:(i) MCCB 160 Amp 4 pole 36 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No. Make: Schneider, L&T or Legrand.(ii) Indicating lamp LED type with holder key flush mounted, Red, Yellow, blue with toggle switch - 1 set ( set of three) as in incoming phases.Outgoing:(i) MCB TP 63A, 10kA, 415V. - 01 No. Make: Schneider, L&T or Legrand.(ii) Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iii) Power contactor 3 pole AC, with 240 volt coil, 32 Amp rating conforms to IS / IEC 60947-4-1 for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iv) Copper bus bar strips made of copper of size 40x5mm having no.s of hole for connecting of outgoing cables - 04 Nos |
| 35 | Supply, installing, testing and commissioning of LT feeder pillar box factory made cubical outdoor type, slopy canopy fabricated out of 3.15mm thick CRCA sheet with angle iron base frame made of 40x40x6mm, 45cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415V 3 phase 4 wire weather proof with IP-66 protection, with separate hinge door for each compartment for incoming and out going MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer after under going a rigorous metal treatment process involving alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with copper busbar (TPN), suitable double compression copper cable glands complete in all respect for bay work station and including provn of the following:- (a) MCCB 400 Amps 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 36 kA - 01 Nos, (d) MCCB 100 Amp, 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 25 kA-05 Nos, (f) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V, A, F, PF, KW, kVAR, kWH etc. (h) Phase indicator lamp R,Y & B - (01 Set of three). (j) S&F Copper Bus bar 600Amps of suitable size, all are in equal size - Set(R,Y,B,N)Note: All existing cable connections will be disconnected from old Panel carefully and re-connected with new Panel by providing glands and thimble all as directed by Engineer-in-Charge. |
| 36 | All as per item No 35.00 above but comprising of the following:-(a) MCCB 250 Amps 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 36 kA - 02 Nos, (b) Change over switch 400 Amp 4 pole 36 KA- 01 Nos,(c) MCCB 100 Amp, 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 25 kA-04 Nos,(d) Digital time switch 3 phase current capacity 16 Amp- 01 Nos,(e) Power contactor 3 Pole, 32 amps- 01 Nos, (f) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V, A, F, PF, KW, kVAR, kWH etc. (h) Phase indicator lamp R,Y & B - (01 Set of three). (j) S&F Copper Bus bar 400Amps of suitable size, all are in equal size - Set(R,Y,B,N)Note: All existing cable connections will be disconnected from old Panel carefully and re-connected with new Panel by providing glands and thimble all as directed by Engineer-in-Charge. |
| 37 | Supply and fixing LED Column Light 50 watt, 4 mtr height with die-cast aluminum pipe housing with cylindrical opal polycarbonate diffuser designed for rugged outdoor usage & IP 65 protection with Tricolor and tratic white output switch mounted on PCC block including connection copper wire of required length (not more than 2 mtr), connector and thimble/lugs etc including taking down old one complete all as specified and directed. |
| 38 | Material and labour for fault finding on LT/HT cables of any size and any length with fault detective machine by thumbing method and suitable high voltage and all as and directed by Engineer-in-Charge. |
| 39 | Supply and fix cable jointing STRAIGHT THROUGH JOINT for 1.1KV grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 50 to 95 sq mm and all as directed by Engineer-in-Charge.Make : MSeal/Raychem/XICON/Denson/3M |
| 40 | Supply and fix cable jointing STRAIGHT THROUGH JOINT for 1.1KV grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 120 to 185 sq mm and all as directed by Engineer-in-Charge. Make : MSeal/Raychem/XICON/Denson/3M |
| 41 | Supply and fix cable jointing STRAIGHT THROUGH JOINT for 1.1KV grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 240 to 300 sq mm and all as directed by Engineer-in-Charge.Make : MSeal/Raychem/XICON/Denson/3M |
| 42 | M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm. Make : MSeal/Raychem/XICON/Denson/3M |
| 43 | M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm. Make : MSeal/Raychem/XICON/Denson/3M |
| 44 | M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm to 400 sqmm. Make : MSeal/Raychem/XICON/Denson/3M |
| 45 | S&F in repair LED Flexible strip single colour 15W/Mtr professional LED Strip IP65, 240 Volt, PF-0.8 including fixing on wall/pole complete all as specified and directed. |
| 46 | S&F in repair LED Flexible strip multi colour 15W/Mtr professional LED Strip IP65, 240 Volt, PF-0.8 including fixing on wall/pole complete all as specified and directed. |
| 47 | S&F in repair LED Driver for above strip 75 W LED Strip driver IP 65 complete all as specified and directed. |
| 48 | S&F in repair, MCCBs in existing FP/panel, connecting to bus-bar with all connecting accessories and modification in busbar (if Necessary), connection complete and testing after completion, all as specified and directed, of following capacities :- |
| 49 | (a)MCCB 63 Amps,16 kA,FP, 50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 50 | (b)MCCB 100 Amps,16 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 51 | (c)MCCB 160 Amps,25 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 52 | (d)MCCB 200 Amps,25 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 53 | (e)MCCB 250 Amps,36 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 54 | (f)MCCB 320 Amps,36 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu. |
| 55 | (g) MCCB 400 Amps,36 kA,FP,50Hz,Thermal magnetic release,lcs=100% lcu. |
| 56 | M&L for feedder pillar box (size 1.0 x 0.8 x 0.3 Mtr) factory made pedestal cubical double door outdoor type, CPRI approved, modular construction fabricated out of 3.15 mm thick MS sheet, epoxy powder coated to give superior finish, totally enclosed, dust and vermin proof with locking arrangement (compartment wise) front & back side opening system including rain shed 15 cm all around, platform mounted having minimun clearance of 450 mm above ground level suitable for 415 Volts 3 phase 4 wire system 50 Hz supply, having ETP grade copper busbar strip (three phase & neutral) duly tapped in colour coded FRP sleeves install on porcelain /epoxy insulator, floor mounted type based on angle iron frame and legs 40x40x5 mm thick and having locking arrangement with 50 mm lock make Navtal or Harrison with three keys and including grouting of panel with necessary PCC work complete all as specified. The scope of work including provision of housing the following accessories:-Incoming:(i) MCCB 400 Amp 4 pole 36 KA 415 V with thermal magnetic release, Ics=100% Icu. - 01 No. Make: Schneider, L&T or Legrand.(ii) Indicating lamp LED type with holder key flush mounted, Red, Yellow, blue with toggle switch - 1 set ( set of three) as in incoming phases.Outgoing:(i) MCCB FP 200 Amp, 25 KA, 415 V with thermal magnetic release, Ics=100%Icu.-02 No. Make: Schneider, L&T, Legrand. (ii) MCCB FP 100 Amp, 25 KA, 415 V with thermal magnetic release, Ics=100%Icu.-02 No. Make: Schneider, L&T, Legrand (i) MCB TP 63A, 10kA, 415V. - 01 No. Make: Schneider, L&T or Legrand.(ii) Digital time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iii) Power contactor 3 pole AC, with 240 volt coil, 32 Amp rating conforms to IS / IEC 60947-4-1 for ON/OFF controlling of security lights - 01 No. Make: Schneider, L&T or Legrand.(iv) 600 Amps Copper bus bar strips made of copper of suitable size having no.s of hole for connecting of outgoing cables - 04 Nos Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender