Tender For Provision Of Drainage System At Trishul Enclave And Provision Of View Cutter At Nkg Building P-219 At Varunapuri. (Tender Id No. 2026_Mes_788487_1)
Tender Value
26.92 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Drainage System At Trishul Enclave And Provision Of View Cutter At Nkg Building P-219 At Varunapuri. (Tender Id No. 2026_Mes_788487_1)
BOQ
| Sl. No. | Item Description |
| 1 | Excvation in trenches not exceeding 1.5 metres wide and 1.5 metres in depth and getting out Hard/dense soil complete all as specified and as directed. |
| 2 | Removing excavated material soil n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed . |
| 3 | Returning, fillingin in, including spreading levelling watering and well ramming in layers not exceeding 25cm. complete all as specified and as directed. |
| 4 | M&L PCC Type D-2 1:4:8 (40mm graded aggregate) as in foundation filing and mass concrete complete all as specified and as directed. |
| 5 | M&L PCC Type B-2 1:2:4 (40mm graded aggregate) cement concrete in surface channel and drains complete all as specified and as directed. |
| 6 | M&L PCC Type B-0,1:2:4 (12.50mm graded aggregate) ,as in coping of drain complete all as specified and as directed. |
| 7 | M&L precast cement concrete block masonary with solid blocks of PCC 1:3:6 type C1 with 20 mm graded aggregate exc 10 cm in width and setting in CM:1:6 complete all as specified and as directed By Engineer-in-charge. |
| 8 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and fair without using extra cement complete all as specified and as directed. |
| 9 | M&L for 300mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed. |
| 10 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in (CM 1:4:8 type D-2) complete all as specified and as directed.(300mmdia) |
| 11 | M&L for precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, drain cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces in CM 1:6 complete all as specified and as directed. |
| 12 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 13 | M &L 75 mm thick PCC 1:3:6 type C-2 as in Plinth Protection finished even and fair complete all as specified and as directed. |
| 14 | Excavation in post holes (or similar holes) soft/disintegrated rock each n. exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete as as specified. |
| 15 | M&L for Plain cement concrete Type D2 1:4:8 (40mm graded aggregate) as in foundation filling complete all as specified and as directed. |
| 16 | M&L for Plain cement concrete Type B2 1:2:4 (40mm graded aggregate) as in post holes complete all as specified and as directed. |
| 17 | S &F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and as directed.( Fe410-W(Gde E-250) Quality A). |
| 18 | S&F plates (plain or chequered) channel square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.( Fe410-W(Gde E-250) Quality A). |
| 19 | M&L for preparation of new steel surfaces & applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome of any description exc 10cm width or girth as specified and directed. |
| 20 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 21 | Removing excavated material (soft/ disintgrated) n 50 exc. and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender