Tender For special Repairs To Electrical Sub Stn And Pump House In Navy Area And special Repair To Old Unsv Water Supply Pipelines And Other Connected Works At Chanakya Bagh, Chanakyapuri Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
14 days left
EMD
97282
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Electrical Sub Stn And Pump House In Navy Area And special Repair To Old Unsv Water Supply Pipelines And Other Connected Works At Chanakya Bagh, Chanakyapuri Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: SPL REPAIRS TO ELECTRICAL SUB STN AND PUMP HOUSE IN NAVY AREA AND SPL REPAIR TO OLD UNSV WATER SUPPLY PIPELINES AND OTHER CONNECTED WORKS AT CHANAKYA BAGH, CHANAKYAPURI UNDER GE NEW DELHI Contract No: GE/ND-58/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B&R PORTION:Demolition/ Taking down of existing roof treatment incl under layers of cement screed, taking down from roof incl concrete / bitumen gola along with wall junction where ever occurred and disposing out of MoD land complete all as specified and directed by Engr in charge. |
| 3 | M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400 micron thickness having SRI of 130, tested as per ASTM E 1980.The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resisitance to transmission of ponded water upto 3.5 bars of pressure for 7 days. The waterproofing membrane will be laminated with 25-40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent and anti grafetti property passing scratch hardness test of 500g as per IS;101(P5/SEC2). The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive test as per IS-4031 part6-1988 and permeability of water as per IS;2645-2003 complete all as specified and directed.Make: Ms Asian Paints Ltd/ Ms Berger Paints Ltd/ Ms Pidilite Pvt Ltd/ Ms STP Ltd/ Ms I-canNano |
| 4 | Dismantling wrought iron or mild steel work of any description not other wise described complete all as specified and directed. |
| 5 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, suitable pattern roof coverings complete all as specified and directed. |
| 6 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 50 m and making disturb surface good complete all as specfied and directed. |
| 7 | M&L for PCC 1:3:6 type C2 (40 mm graded crushed stone aggs) as in foundation for fencing posts, complete all as specified and directed. |
| 8 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 9 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 10 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | Demolition of brick work built in Cement morter or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed. |
| 12 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 13 | Diemolition of Stone slabs and tiles/ paver block of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 14 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for Granite stone (mirror polished) of 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor, cooking platform including grinding, rubbing and polishing (granite finish) and exposed edges of stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed. |
| 18 | M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors & skirting , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 19 | M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces 450x300x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 20 | Demolition of plain cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 21 | M&L for 75mm PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 22 | M&L for factory made, precast concrete, Machine pressed precastconcrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade ® with grey cement and no pigment complete all as specified and directed. |
| 23 | M&L for sand cushioning under interlocking paver block complete all as specified and directed. |
| 24 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening (s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed. |
| 25 | Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified and directed. |
| 26 | Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.. |
| 27 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm modular of elasticity 900 N/mm2 and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension shall be acceptable variation in profile diamansion on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineering- Charge. Note: Hardware fittings shall be paid separately under relevant item |
| 30 | M&L for Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door/window to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings” complete all as specified and directed.Note: Fixture/fittings shall be measured & paid under relevant item |
| 31 | M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineering- Charge.Note: Hardware fittings shall be paid separately under relevant item |
| 32 | M&L for PCC 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in hold fast, lintel, steps and bends complete all as specified and directed. |
| 33 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 34 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets complete all as specified and directed. |
| 35 | S&F Butt hinges 100mm, extruded Aluminium alloy with galvanised mild steel hinge pin , anodised and fix Type C--21 complete all as specified and directed. |
| 36 | S&F 100mm long Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 37 | S&F 200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 38 | S&F 150 mm aluminium handles cast type complete all as specified and directed. |
| 39 | S&F 250 mm long aluminium alloy , sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on stable complete all as specified and directed. |
| 40 | S&F for 300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. |
| 41 | S&F 30mm width of flap (when open) size continuous (Piano) hinges, mild steel and fixed , complete all as specified and directed. |
| 42 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing rubbish out of mod land complete all as specified and directed. |
| 43 | M&L for dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed. |
| 44 | M&L for cement plaster 5mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, facia, chajja, etc. finished fair and smooth complete all as specified and directed. |
| 45 | M&L for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair (external Plaster) without using extra cement complete all as specified and directed. |
| 47 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer over a coat of wall care putty complete all as specified and directed. |
| 48 | M&L for three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 49 | M&L for preparation of new plastered surfaces of walls and applying tapplying two coat of Exterior weather proof acrylic emulsion paint over a primer over a coat of wall care putty complete all as specified and directed. |
| 50 | M&L for complete removal of existing surface & applying two coat of Exterior weather proof acrylic emulsion paint of any tint on external walls complete all as specified and directed. |
| 51 | M&L for two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 52 | M&L for including preparation of old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces, complete all as specified and directed. |
| 53 | M&L for PCC (1:2:4) type B-1 using 20mm graded aggregate as in copings, apex stones, bed plates, mass filling in any shape and in any location including weathering, slightly round or chamfered angles and throating complete all as specified and directed. |
| 54 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring complete all as specified and directed. |
| 55 | S&F in repair Nahani traps 100mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 complete all as specified and directed. |
| 56 | S&F in repair wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including CP mixer tap, waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, complete all as specified and directed. |
| 57 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including pvc seat cover complete all as specified and directed. |
| 58 | S&F in repair vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement complete all as specified and directed. |
| 59 | S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, valve, float and handle including bracktes complete all as specified and directed. |
| 60 | S&F Steel rolling shutters 1.25mm thick, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type complete all as specified and directed. |
| 61 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 62 | S&F false ceiling at all heights with powder coated metal ceiling system comprising of factory finished powder coated aluminium/GI ceiling tiles of size 595 x 595 mm (to suit 600 x 600 mm grid), having minimum thickness 0.5 mm for aluminium / 0.6 mm for GI, with electrostatic powder coating of minimum 60 microns thickness in approved colour and shade including all framework and hangers complete all as specified and directed. |
| 63 | S&F 4 mm thick pre coated Alluminium Composite Panel (ACP) cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed. |
| 64 | S&F in repair PVC 3 to 5 mm thick Wall/ceiling panel square and 0.9mm thick holow tongue and grove type of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with furring channel grid @ specing 300mm c/c fied to wall/celing with ss screw and plug incl complete all as specified and directed. |
| 65 | S&F mild steel (MS) powder coated windows of approved size and design, fabricated from MS sections of minimum 1.2 mm thickness, including cutting, welding, grinding and surface preparation with anti-corrosive treatment, complete with glazing using 5 mm thick clear/toughened glass fixed with MS beading and EPDM rubber gasket, and providing MS safety grill made of 10–12 mm square bars (or equivalent) at 100–150 mm c/c spacing, welded to the frame, and providing stainless steel (SS 304) wire mesh of approved quality fixed with suitable beading/screws. The window shall be provided with necessary hardware including hinges, handles, tower bolts and locking arrangement, and the entire assembly shall be finished with electrostatic powder coating of minimum 60 microns thickness in approved colour and shade. The window shall be installed in position with MS holdfasts/anchor fasteners, including sealing of gaps with cement mortar/PU sealant, complete in all respects as per specifications, drawings and directions of Engineer-in-Charge. |
| 66 | E&M PORTION:S&F Snake Bite Kits for use at E&M installations. The Kits shall include a suction pump with plunger, sterile blade/scalpel, antiseptic wipes, sterile gauze pads, crepe bandage (10 cm), adhesive bandages, alcohol swabs, tourniquet, and a bilingual instruction leaflet (English and Hindi), all housed in a waterproof, shock-resistant, portable hard case, compliant with relevant BIS and DGMS guidelines complete all as specified and directed. |
| 67 | S&F First Aid kits for use at E&M installations, with Kits designed for electrical environments and conform to IS:8654, including components such as sterile dressings and bandages, burn treatment gel, eye wash bottle (500 ml), insulated scissors, CPR mask, antiseptic lotion (100 ml), adhesive tape, sterile gloves, cotton rolls, emergency contact card, and a first aid booklet (English & Hindi). The kits shall be provided in a durable, wall-mountable, and portable box made of non-corrosive material, clearly marked in accordance with standard safety signage norms. All items must be non-expired, medically certified, and suitable for deployment in Indian industrial and field conditions complete all as specified and directed. |
| 68 | Supplying, fabricating, and fixing Layout Board for Electrical Installation made of 16 SWG MS sheet, powder-coated in approved shade, mounted on MS angle frame (40x40x6 mm) fixed on walls using suitable fasteners. The Board to display single-line diagram (SLD) of the E&M Installation (Electric/Water Supply) with standard symbols, printed on UV-protected laminated vinyl sheet installed at visible location complete all as specified and directed by Engineer-in-Charge. Note : The content to be printed on the boards shall be provided by the department in due course, and the contractor shall consult the department for the same prior to execution |
| 69 | S&F informatory board, made from 2 mm thick aluminum sheet, mounted on a 25 x 15 mm stainless steel rectangular pipe frame, with outer border and canopy-type cover of 35 mm dia stainless steel pipe. The board shall be laminated with approved colour vinyl and lettered with white colour text of 3\\" to 4\\" height, cut to shape using plotter and heat-pressed for permanent adhesion. The board shall be supported on 2 Nos. stainless steel pipes of 75 mm dia (304 Grade, glossy finish), embedded in cement concrete (1:2:4) type B-1, to keep top edge at suitable height above ground level, including excavation, grouting, and finishing as per site condition complete all as specified and directed by Engineer-in-Charge. Note : The content to be printed on the boards shall be provided by the department in due course, and the contractor shall consult the department for the same prior to execution |
| 70 | S&F ISI-marked CO₂ type fire extinguisher (5 kg capacity), suitable for Class B and C fires, especially for electrical equipment and panel areas, conforming to IS:15683. complete with discharge hose, squeeze grip valve, wall-mounting bracket, filled with CO₂ gas, factory pressure-tested, and ready for use with all standard accessories, operating instructions complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F ISI-marked ABC type fire extinguisher (6 kg capacity), suitable for Class A, B, and C fires, conforming to IS:15683 filled with mono ammonium phosphate powder, complete with hose, pressure gauge, wall bracket, and safety pin, supplied fully charged and pressure-tested complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F and laying of ISI-marked electrical insulating mats as per IS:15652:2006, suitable for HT installations up to 11 kV, with a minimum thickness of 2.5 mm. Mats shall be anti-skid, flame- and moisture-resistant, of standard width (1 meter), cut to required sizes complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in replacement Danger notice plate for HT of 25 cm x 20 cm x 1.6 mm thick mild steel sheet vitreous enameled white, with letters, figures and conventional skull and bones and wtitten as \\"DANGER\\" in signal red colour and incl provn and fixed with MS clamps made out of MS flat 25 mm x 3mm , including nuts & bolts, including 2 coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.Note :- Words shall be written in two languages viz. Hindi and English. |
| 74 | M&L for shifting of serviceable LT Panels by disconnecting HT/LT connections of any capacity at any location to other site within AOR of GE New Delhi and make proper HT/LT connection all as specified and directed. Note: Quoted rate includes the cost of any T&P and any machinery involved. |
| 75 | Supplying and installing heavy duty 450 mm dia (18-inch) industrial exhaust fan as per IS:2312 and IS:11660, with a high-efficiency, totally enclosed motor, dynamically balanced corrosion-resistant impeller, suitable for single-phase 230V AC supply, IP55 protection, and mounted on a rigid frame with vibration isolation including all accessories for complete installation complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for surface preparation and painting of LT Panels including complete removal of old paint by scraping and cleaning, application of one coat of anti-corrosive metal primer and two coats of approved synthetic enamel paint of required shade by brush or spray, including all materials, labour, tools, masking of sensitive parts, and ensuring a smooth, uniform finish as per site requirements and instructions complete all as specified and directed by Engineer-in-Charge. |
| 77 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line etc. not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified and directed. |
| 78 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 79 | Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 80 | Taking out from trench or under hard standing/ road, existing old serviceable/ unservicable rusted / corroded CI/DI/GI pipe of size 100 mm bore spigot and socketed ends (including all fittings) & tyton/ lead joints incuding burning out joints and recovering lead including balling out dirty / muddy water if necessary, complete all as specified and directed by Engineer-in-charge.Note :- (a) Excavation and earth work shall be measured & paid separately under respective items of schedule of works. (b) The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account. (c) Pipeline is laid under hard standing/Interlocking tiles/road etc where excavation is more typical. Contractor needs to visit site before quoting rate. (d) Quoted rate deemed to be inclusive of all the expenses for removing interlocking tiles/excavation in hard standing and refixing the same. Rate needs to be quote accordingly. |
| 81 | Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe and connections of size upto 50 mm bore including all fittings complete all as specified and directed by Engineer-in-charge.Note. (a) Excavation and earth work shall be measured & paid separately under respective items of schedule of works. (b) Pipeline is laid under hard standing/Interlocking tiles/road etc where excavation is more typical. Contractor needs to visit site before quoting rate. (c) Quoted rate deemed to be inclusive of all the expenses for removing interlocking tiles/excavation in hard standing and refixing the same. Rate needs to be quote accordingly. |
| 82 | Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket Tyton push on Joints of spigot and socket ends centrifugally cast (spun) class \\" K-9\\" conforming to IS-8329 -2000 in any length of size 100mm bore laid in trenches complete all as specified and directed.Make : TATA Ductura/ Jindal/ Electrosteel/ Rashmi Metalink/ Kejriwal casting/ ESL Steel LtdNotes.(a) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (b) The rates of rubber gasket Tyton push on Joints is included in this item and nothing shall be extra paid for Tyton Joints. |
| 83 | Supplying, Laying, jointing and testing of Steel water tubing 50 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and directed.Make : Tata Steel/ Jindal Pipes/ Surya Roshni Ltd/ APL Apollo tubes/ Jindal Hisar/ Hitech PipesNote :- (a) Excavation and Earth work shall be measured and paid separately under respective item of Schedule of Earth work (b) The rate of GI fittings is included in this item and nothing shall be paid extra on this account. |
| 84 | S&F in replacement 100mm dia sluice valve, ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged, drilled, steel spindle and iron wheel handle, CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed by Engr-in-Charge. Make : Zoloto/Kirloskar/L&T/Leader |
| 85 | S&F in replacement Gun metal globe or gate valve size of 50 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conform to IS 778 - 1984 complete all as specified and directed.Make : Zoloto/Kirloskar/L&T/Leader/ S S Cast Valves/Hawa Valves/Oswal industries |
| 86 | S&F in replacement Gun metal globe or gate valve size of 25 mm bore pipe, with iron wheel head, screwed both ends for iron pipe conform to IS 778 - 1984 complete all as specified and directed.Make : Zoloto/Kirloskar/L&T/Leader/ S S Cast Valves/Hawa Valves/Oswal industries |
| 87 | S&F in replacement CI Special fittings 80mm to 150mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer etc. all as per requires at site complete all as specified and directed by Engr-in-charge. |
| 88 | S&F in replacement DI Special fittings 80mm to 300mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer etc. all as per requires at site complete all as specified and directed by Engr-in-charge. |
| 89 | S&F inreplacement air release valve double isolated valve 50 mm dia PN 10, ISI marked confirming to IS-14846-2000, flanged and drilled including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed by Engr-in-Charge.Make : Kirloskar (KBL)/Leader Valves/ZolotoNote : (a) Cost of Clamp and other fixing arrangement as per site requirement to make it fully functional is deemed to be included in this rate. Nothing extra to be paid on this account. (b) The cost of Pipeline upto 2 meter required from main pipeline to Air Release valve is deemed to be inclusive in the quoted rate. Nothing extra to be paid on this account. |
| 90 | Demolition of old Valve pit and material and Labour for construction of valve pit Type 'B' of size 75 cm x 75 cm x 75 cm ( internal dimension ) of brick masonry laid with cement mortar (1:4). from the top of surface including cover of MS sheet 3.15 mm thick and angle iron 50mm x 50mm x 6mm with hinges, handle and locking arrangement including painting with two coat of synthetic enamelled paint over a coat of red oxide and grouting to PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregates , Rendering 15mm thick in cement mortar 1:3, including three coats of white wash on internal surfaces and external exposed surfaces, foundation concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates including necessary earthwork, returning filling, removal complete all as specified and directed by Engineer in charge. |
| 91 | M&L for PCC 1:2:4 type B-2 for thrust blocks complete all as specified and directed by Engineer-in-Charge. |
| 92 | M&L for boring below road surfaces/hard standing suitable for inserting pipe of suitable size including removal of surplus soil and making good disturbed surfaces complete all as specified and directed by Engineer -in -Charge. |
| 93 | M&L for connection from existing main water supply pipeline including ferrule, MS Clamp and accessories for providing of connection complete all as specified and directed by Engineer -in -Charge.Note: (a) Srl Item No 02.00, 07.00, 08.00, 13.00, 14.00, 26.00 to 30.00, 33.00, 59.00, 61.00 to 67.00, 69.00, 70.00, 74.00, 81.00 to 85.00 & 87.00 of BOQ and all bathroom fittings and sanitary items are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender