Tender For Upgradation Of Ot In Govt Dental College Shimla.( Sh-: Construction Of Semi Modular Operation Theatre In Fifth Floor Block - Dental College And Hospital)( Balance Work)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2026
6 days left
EMD
5470
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Ot In Govt Dental College Shimla.( Sh-: Construction Of Semi Modular Operation Theatre In Fifth Floor Block - Dental College And Hospital)( Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)including carriage of materials within all leads and lifts. |
| 2 | Brick work using common burnt clay building bricks second class building bricks in superstructure in all floor levels in cement mortat 1:6 (1 Cement :6 sand) including carriage of material within all lead and lifts as per direction of engineer in charge. |
| 3 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level includong arises, internal round angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth (Cement mortar 1:6) |
| 4 | Providing and Fixing of Glass Pan 4mm Plain Frosted of approved brand at store of Sub Division No.II at IGMC. Section- nursing hostel including carriage of materials within all leads and lifts. |
| 5 | Providing and fixing 19 mm thick Both side pre laminated Board in shutter of cup boards/ shelves/ lining including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts |
| 6 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 7 | Providing and fixing 2 way scrub sink automatic including carriage of material within all lead and lifts as per direction of Engineer incharge. |
| 8 | Providing and fixing hydaulic door machine embedded in floor attached to door shutters including carriage of materials within all leads and lifts. |
| 9 | Providing & fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore |
| 10 | Providing and fixing G.I union 15mm including carriage of materials within all leads and lifts. |
| 11 | Providing and Fixing of Gate Valve 15mm ( Heavy) approved brand including carriage of materials within all leads and lifts. |
| 12 | Providing and fixing high pressure PVC (finolex) Type-A spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts :-110mm nominal size |
| 13 | Providing and fixing PVC (finolex )110 mm dia Plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. |
| 14 | Providing and fixing PVC (Finolex) 45 degree bend 110mm dia ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. |
| 15 | Providing and fixing 110 mm dia PVC collars ISI marked including fixing with approved adhesive etc.complete including carriage of materials within all leads an lifts. |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall (1) 15 mm nominal outer dia Pipes |
| 17 | Supply Installation Testing and Commissioning of Puff Panel both side GP sheet 0.8mm and .5mm, 40mm thick with density 40kg/cu.m as infill for ceiling, corner and sloping. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender