Tender For Repairing Of Electrical Installation And Other Electrical Works At Various Telephone Exchange Buildings/Bts Sites Under Sirsa Distt. (Ch To repair maintenace Of Ems Under Hisar Ba)
Tender Value
7.93 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
9 days left
EMD
15860
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Electrical Installation And Other Electrical Works At Various Telephone Exchange Buildings/Bts Sites Under Sirsa Distt. (Ch To repair maintenace Of Ems Under Hisar Ba)
BOQ
| Sl. No. | Item Description |
| 1 | Replacement of existing 36/40W Fluorescent defective /faulty tube fittings with 4'-1x20/22Watt prewired PVC Batten type LED fitting complete and fixing directly on ceiling / wall i/c making connections with 1.5 sq.mm. PVC insulated copper conductor, cable as reqd.(M/s Bajaj/Philips/Havell's/Surya/Crompton). |
| 2 | Supplying and fixing of following fans i/c making connections testing etc. complete as required.( make- CROMPTON AND OTHER APPD MAKES) |
| 3 | Ceiling Fans (48''sweep) |
| 4 | Exhaust Fans with metallic body (300mm sweep) |
| 5 | Supplying and fixing of following heavy duty wall mounted fans with metal body i/c making connections testing etc. complete as required.(approved make) |
| 6 | Wall Fan with metallic body (300mm sweep) |
| 7 | Repairing of following fans i/c dismntalling the same from site , rewinding the same with super enamelled copper wire of suitable gauge, Varnishing etc., replacement of balL bearings/ greasing etc. and reinstallation of the same back at site after repairing, making connections testing etc. as required. |
| 8 | Ceiling Fans (48''/56'' sweep) |
| 9 | Exhaust fan (18'' Sweep) |
| 10 | Wall fans (16'') sweep |
| 11 | Replacement of following defective/burnt items of Electrical installation/MCB DB/wiring /Panels i/c dismentlling the defective/burnt one , making connections testin etc. as required. |
| 12 | 100Amps Kit Kat Fuse (Porcelein type) ISI Mark |
| 13 | 200 Amps Kit Kat Fuses (Porcelein type) ISI Mark |
| 14 | 63AMPs 4 Pole isolator (Approved Make) |
| 15 | 6-32Amps SPMCB(Approved Make) |
| 16 | 32Amps DP MCB(Approved Make) |
| 17 | 30/45W LED coumpound light fitting (IP 66 rating) suitable for 230V 50HZ AC Supply (M/s PHILIPS / OTHER APPD MAKES) |
| 18 | 36 Watt Electronic Choke (M/s Bajaj/Philips/Havell's/Surya /Crompton) |
| 19 | Starter for 40W Fluorescent tube fitting ISI Mark |
| 20 | 4'-36 W fluorescent tube rod (M/s Bajaj/Philips/Havell's/ Surya /Crompton) |
| 21 | LED -9 W,230V-50HZ rating (M/s Bajaj/Philips/Havell's/ Surya/Crompton) |
| 22 | Supplying and drawing 2x1.5 Sqmm PVC insulated copper conductor cable ISI Mark |
| 23 | Supplying and drawing 2x4 Sqmm PVC insulated copper conductor cable ISI Mark |
| 24 | Supplying and drawing 2x6 Sqmm PVC insulated copper conductor cable ISI Mark |
| 25 | 20mm dia PVC conduit pipe a/w accessories i/c fixing the same on wall surfacefor covering various wires |
| 26 | 2.5Mfd Capacitor for ceiling Fan ISI Mark |
| 27 | Electronic Fan Regulator (ISI Mark) |
| 28 | 5/6Amps Piano type switch (Approved Make) |
| 29 | 5/6 Amps 6 Pin Piano type Socket (Approved Make) |
| 30 | 15/16 Amps Piano type Switch (Approved Make) |
| 31 | 15/16 Amps 6 Pin Piano type Socket (Approved Make) |
| 32 | 100 Amps 3 Pole 10 KA MCCB (Approved Make) |
| 33 | 100 Amps 4 Pole 10 KA MCCB (Approved Make) |
| 34 | MS Enclosure fabricated out of 16 SWG MS Sheet having sufficient space to house 100/200 Amps 3phase MCCB/Kit Kat fuses Complete as required. |
| 35 | Extension board with 5 Nos 5 way 6Amps multi sockets and common switch with five meters PVC insulated sheathed copper conductor flexible cable of 1.1 kVA Grade complete as required. (ISI Marked) |
| 36 | 63Amps Rotary type Changeover cum selectot switch 3 Position) (M/s Vaishno/SS make) |
| 37 | Contactor (MN -A1 OR Similar compatible model) -10 A suitable for 3 Phase 415V AC mains supply |
| 38 | Replacement of following capacity Changeover Switches i/c dismentalling the burnt/faulty one making connections testing/commissioning etc. as required |
| 39 | 63 Amps 415 V rating three phase Changeover switch housed in sheet steel enclosure with side handle (Approved Make) |
| 40 | 100 Amps 415 V rating three phase Changeover switch housed in sheet steel enclosure with side handle (Approved Make) |
| 41 | 100 Amps 415 V rating three phase front Operated Changeover switch for existing MV Panel (Approved Make) |
| 42 | 63 Amps 415 V rating three phase front Operated Changeover switch for existing MV Panel (Approved Make) |
| 43 | Repairing of 3 HP Monoblock Pump and 3 Phase Motor of Monoblock type water pump motor set i/c dismentalling the same from site,checking and tracing out the faults , checking the windings continuity , rewinding the same with super enamelled copper wire ,varnishing etc. replacement of bearings /bush /greasing and servicing of pump i/c replacement of worn out bush/impeller and other defective parts for smooth functioning , reassembling the same and reinstallation back at site making connections complete testing commissioning as required. |
| 44 | Wiring for light point/Fan point/exhaust fan point /call bell point with 1.5 Sqmm FRLS PVC insulated Copper conductor cable in surface/recessed medium class PVC conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5Sqmm FRLS PVC insulated copper conductor cable as required - GROUP-A |
| 45 | Replacement of following way sheet steel MCB DB 240V/415 V on surface/recess complete with tinned copper busbar neutral busbar earthbar din bar intercoonections powder painted i/c earthing etc. as required. |
| 46 | 4way (4+12) double door Triple pole and neutral sheet steel MCB DB 415V rating |
| 47 | 12way double door Single pole and neutral sheet steel MCB DB 240V |
| 48 | Replacement of following size faulty/ damaged aluminum armoured PVC insulated PVC sheathed/XPLE Power cable ISI mark of 1.1KV Grade etc as reqd - |
| 49 | 2x6 Sqmm |
| 50 | 3-1/2x25 sqmm |
| 51 | 3-1/2x35 Sqmm |
| 52 | 3-1/2x50 Sqmm |
| 53 | Checking, tracing out and removing the electrical installation faults in all electrical equipments such as MV Panel , KIT KAT , TPN SWITCH , MCBDB/SWITCH BOARD/POWER PLUG & any other equipment i/c carbon cleaning of all phase connections , neutral connection , cleaning & tightning of all earthing connections [AC and DC earths ] i/c replacement of thimble , replacement of faulty wires , providing proper tapes with AC Load balancing & cleaning of panels with blower at TE/BTS site as per following distances from district Main Exchange under sirsa and restoring the Electrical mains/DG Supply as per site requirements. |
| 54 | Upto 25KM Distance |
| 55 | 25Km - 50KM distance |
| 56 | 51 Km and above distance |
| 57 | Refilling of following Capacity Fire extinguishers installed at various TE/BTS Sites of Sirsa i/c dismentalling the same from site for refilling,Checking the weight/Pressure of Fire extinguisher, i/c taking the same from site to the Refilling Plant, Testing the same and refilling upto the recommended pressure , Pasting the Refilling Schedule slip/Tag , bringing back the refilled Fire extinguisher at site and i/c Supplying (if required)/fixing the same on wall with suitable clamp complete as required. |
| 58 | 4.5 KGS CO2 type Fire extinguisher |
| 59 | 5/6KG Capacity ABC type Fire Extinguisher |
| 60 | Replacement of following defective items of fire extinguishers i/c dismentalling the existing defective/worn out ones ,refixing the new items properly, testing the operation of same at site as requird. |
| 61 | Rubber Hose (One meter length) |
| 62 | Pressure gauge of ABC type Fireextinguisher |
| 63 | Brass Valve of Fire Extinguisher |
| 64 | Replacement of following size damage/defective GI B class pipe i/c replacement required acessories plumbing work for 3HP/5HP pump complete as reqd. (Approved Make) |
| 65 | Replacement of following defective parts in 3HP/5HP pump i/c replacement of required acessories i/c plumbing work complete as reqd. (Approved Make) |
| 66 | 80 mm dia Foot valve |
| 67 | 50 mm dia Foot valve |
| 68 | 25mm Gate Valve for water Pipeline |
| 69 | 40mm Gate Valve for water pipe line |
| 70 | Supplying & fixing of flush mounted analog time switch suitable for 230V, 24 Hrs programable, suitable for intermitent ON/OFF for Exhaust fan i/c making electrical connections etc. complete as required. (L&T or Selec Make) |
| 71 | Making opening for installation of Exhaust fan i/c Cutting the shelter/ Brick wall with the help of suitable cutter/manually , repairing the damages ,Finishing the cut portion and throwing the malba/scrap material away from the site, Plastering etc. all complete as required. |
| 72 | Supplying, Installation, Testing and Commissioning of Maintenance free Chemical earth station as per latest RDSO specifications and as per BSNL Approved makes , consisting of :-a) Copper bonded steel electrode of 3 mtrs long, 17 mm dia with copper bonded thickness of minimum 250 microns and UL listed and marked - 1No.b) Maintenance free, Environmental friendly, Mineral compounds, Semi soluble, non corrosive, conductivity improving material of RDSO approved) =30 Kgc) Poly-plastic, Heavy Duty, weather-proof, environmental free earth pit chamber with cover size about top dia 250mm bottom 330mm and height 260mm, Heavy duty of 7 TON load capacity, the base unit should have knockouts for interconnection of strips. Note - Note :- This earth value should be less than one ohm . |
| 73 | Providing and fixing 25x5mm GI strip on surface /recess complete as required |
| 74 | Providing and fixing the new Earth pit chamber for following type earthing etc complete as required.(6\\"above the ground level) - |
| 75 | Earth Pit Cover of existing Chemical earth i/c provide the new poly plastic, Heavy Duty, weather-proof, environmental free earth pit chamber with cover suitable for size about the base unit should have knockouts for interconnection of strips and making masonry work etc is tobe done |
| 76 | Earth Pit Cover of existing GI / Copper plate earth i/c Providing and Making of earthing PIT of 450mmx450 mm size along with earth pit cover of size 300x300 mm for the existing copper plate/GI plate/Chemical gel GI Earthing and chemical gel copper earthing i/c supplying of all the material required for earth pit i.e. bricks , cement , sand etc plastering finishing complete asper requirementat site. |
| 77 | Supplying and fixing of following Square type Heavy Duty capacitor in a suitable place in MV panel or on wall i/c making connections with suiable size of copper wires etc. complete as required. |
| 78 | 1 KVAR TO 5 KVAR |
| 79 | Less on a/c of dismantled material . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender