Tender For Improvement Of Water Flow Control System At Vasant Kunj B-1 Under Mehrauli Constituency Ac-45.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Water Flow Control System At Vasant Kunj B-1 Under Mehrauli Constituency Ac-45.
BOQ
| Sl. No. | Item Description |
| 1 | Providing safety equipment, safety arrangements for carrying out replacement of 450 mm dia suction-side sluice valves, including loading, unloading, handling and cartage of T&P, safety PPE kits and all incidental arrangements for safe execution of work. |
| 2 | Dewatering the excess water flow during the work. DSR 2023 |
| 3 | Dismantling/removal of existing 450 mm dia suction-side sluice valve of pumpset no. 4, 5 & 6, including removal of nuts, bolts, studs, flange joints, existing packing, cutting wherever required, disconnecting from suction pipeline, use of gas cutter, tools, tackles and manual labour, complete. |
| 4 | Supply of SLUICE VALVE-CIDF WATER The Sluice valve generally confirm to IS:14846 with length over flanges as per PD of IS:14846 corresponding to BS EN-558/ISO5752 Basic Series 3 in CI construction having metal seating (IS:318 Gr. LTB2). Body Door Dome CI to IS:210 Gr. Fg.260, body seat/door face are made of gun metal IS:318Gr. LTB2 spindle will be non-rising stainless steel AISI 410, spindle nut gun metal IS:318 Gr. LTB2, fasteners will be made of carbon steel and flanges are drilling as per IS:1538 table $ & 6. Suitable for PN1.0. Size – 450 mm. DJB SOR 2025 4.12.12 Make: Jupiter/IVC Nasik/Kirloskar/DJB approved |
| 5 | Supply of suitable electric multi-turn actuator, 415 V, 3-phase, 50 Hz, adequately rated for operation of 450 mm dia sluice valve, complete with electric motor, reduction gearing, torque switches, limit switches, local OPEN/CLOSE control, position indication, manual override, weatherproof enclosure, mounting adaptor/coupling and all accessories required for satisfactory operation. DJB SOR 2025. Make: Auma/Rotork/DJB approved |
| 6 | Supply and fabrication of suitable MS/structural steel actuator mounting frame, brackets, base plates and supports, including cutting, drilling, welding, stiffeners, anchor fasteners, primer and two coats of approved paint, complete. |
| 7 | Supply and fixing of 450 mm dia dismantling joint/adaptor/flange arrangement wherever required for connecting new sluice valve with existing suction pipeline, including matching flanges, rubber gaskets, nuts, bolts, washers and other accessories, complete. |
| 8 | Supply of rubber gasket suitable for 450 mm dia flanged water-supply connection, conforming to relevant IS specification, including cutting/selection as required, complete. |
| 9 | Supply of high-tensile quality nuts, bolts, washers, studs and other fasteners required for 450 mm dia valve flange and dismantling-joint connections, including handling and installation. |
| 10 | Installation of new 450 mm dia sluice valve on suction side of pumpsets No. 4, 5 & 6, including lifting, lowering, positioning, alignment with existing suction pipeline, flange jointing, gasket fitting, tightening of bolts, checking of valve spindle/gear movement and all necessary labour, T&P and incidental works, complete. |
| 11 | Mounting, coupling and installation of electric actuator on 450 mm dia sluice valve, including actuator adaptor, coupling, alignment, fixing, setting of limit switches and torque switches, manual override arrangement and complete mechanical commissioning of actuator-valve assembly. |
| 12 | Supply and laying of suitable power/control cable for electric actuators from existing electrical/control panel to actuator locations, including cable laying, dressing, identification, glands, lugs, ferrules and all accessories, complete. |
| 13 | Providing and fixing suitable weatherproof local control station for each electric actuator, comprising OPEN/CLOSE push buttons, selector switch, indication lamps, emergency/stop provision and necessary control accessories, complete. |
| 14 | Providing and fixing electrical control/protection arrangement for operation of four electric actuators, including MCB/MCCB, contactors, overload protection, control relays, auxiliary contacts, terminal blocks, internal control wiring, ferruling and necessary interlocking arrangement with existing system, complete. |
| 15 | Providing suitable earthing connection for each electric actuator/local control station, including earth conductor, lugs, clamps, hardware and connection with existing earthing system, complete. |
| 16 | Electrical termination and commissioning of all four actuator assemblies, including cable gland/termination, checking of insulation, phase sequence, OPEN/CLOSE operation, limit and torque protection, local operation and integration with existing control/interlocking system, complete. |
| 17 | Testing and commissioning of complete flow-control arrangement after replacement of valves, including trial operation of pumpsets No. 4, 5 & 6, checking of suction-side valve operation, leakage at flange joints, actuator response, opening/closing time, limit/torque setting and performance under actual operating conditions, complete. *Note: Any other material/accessories required for successful commissioning of electric driven valves shall be provided by the agency without any extra cost to the DJB. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender