Tender For Renovation Of Front Gate And Construction Of Boundary Wall & Pavement At Sukdeb Sing Road (Shop) Ward No- 12 Undercmc.
Tender Value
1.20 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
2417
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Front Gate And Construction Of Boundary Wall & Pavement At Sukdeb Sing Road (Shop) Ward No- 12 Undercmc.
BOQ
| Sl. No. | Item Description |
| 1 | Page no.-10 Item no.- 2 (b), Dismantling all types of masonry excepting cement concrete plain or reinforced, stackingserviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 2 | Page-12, Item No. 13 , Removal of rubbish,earth etc. from the workingsite and disposal of the same beyond thecompound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as perdirection of Engineer in charge |
| 3 | Page no.-240 Item no.- 3.16, Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and wherenecessary. (a) Depth up to 150 mm. |
| 4 | Page-1, Item No. 2(a), Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 5 | 4 Page-1, Item No. 3 , Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(b) With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of100 m. |
| 6 | Page-2, Item No. 4(b), Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made onmeasurement of finished quantity) |
| 7 | Page-14, Item No. 1, Single Brick Flat Soling of picked jhama bricks includingramming and dressing bed to proper level and filling joints with powdered earth orlocal sand. |
| 8 | Page-15, Item No. 7(a)Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 9 | Page-16, Item No. 16, 125 mm. thick brick work with 1st class bricks in cementmortar (1:4) in ground floor. |
| 10 | Page-42, Item No. 36(f), Hire and labour charges for shuttering with centering andnecessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curvedor straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 11 | Page-43, Item No. 40(ii), Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel |
| 12 | Page-24, Item No. 4(i),Ordinary Cement concrete (mix1:2.4) with graded stone chips (20mm nominal size) excluding shutteringand reinforcement if any, in groundfloor as per relevant IS codes.(i) Pakur Variety. |
| 13 | Page-26, Item No. 10(i),Ordinary Cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shutteringand reinforcement if any, in groundfloor as per relevant IS codes.(i) Pakur Variety. |
| 14 | Page-189, Item No. 1(ii)(b),Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface](ii) With 1:4 cement mortar(b) 15 mm thick plaster |
| 15 | Page-115, Item No. 2,(A) Supplying fitting and fixing door frame with M.S. angle asper drawing & direction of required section.The holes for counter sunk machine screw & nuts will be such as to fit 8 to 10 mm Iron screw. The counter sunk nut to be welded . The nuts are to be welded after careful checking with screw.All welding spots should be properly filed or rounded smoothincluding cost of welding hinges for hinge cleats , lugs for hasp bolt, socket bolt etc. and necessary M.S. clamps of25mm x 6mm flat 225mm long as per direction welded to the frame fitted and fixed in position excluding cost of concrete. |
| 16 | Page-200, Item No. 1b,(a) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces bysand papering etc.wood work |
| 17 | Page-200, Item No. 1a, (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Page-200, Item No. 2A,(A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 19 | (b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 20 | Page-111, Item No. 2(a),Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 21 | Add 9% CGST |
| 22 | .Add 9% SGST |
| 23 | .Add 1% labour cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender