Tender for Tender for Construction Of A Culvert And Approach Road Over The Farhi Nala At The Mau Border Via The Baradih Shiva Temple
Tender Value
1.65 Crore
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
10.25 Lakhs
Bank guarantee accepted
Document Fee
2590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Culvert And Approach Road Over The Farhi Nala At The Mau Border Via The Baradih Shiva Temple
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the exca |
| 2 | G.S.B.(Granular sub base) . For filling in foundation trenches as per drawing and technical specification |
| 3 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 4 | RCC Grade M30 in foundation using batching plant transit mixer & manual placing |
| 5 | RCC Grade M30 in super structure using batching plant transit mixer & manual placing |
| 6 | RCC Grade M35 in wearing using batching plant transit mixer & manual placing |
| 7 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 8 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical |
| 9 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. |
| 10 | Providing and laying pitching on slope laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specification. |
| 11 | Providing and laying boulders apron on river bed for protection against scour with stone boulder weighing not less than 40kg. Each complete as per drawing and technical specification. |
| 12 | Constn. Of embankment with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.1 & 300.2 with lead upto 1000m. As per Technical sp |
| 13 | Providing, laying and spreading materials on a prepared sub grade, adding cement @ 2% by weight to the spread materials manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. |
| 14 | Providing, laying and spreading materials on a prepared sub base, cement @ 4% by weight to the spread materials manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. |
| 15 | Providing and applying tack coat with bitumen (V.G.10) using pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous surface cleaned with machanical broom as per 503 of MORD data book |
| 16 | Providing and applying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penitation grade bitumen or emulsion to require line grade and level to serve as vearing coarse on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grates to be followde by seal coat or either as per Technical Specification Clause 508 |
| 17 | Cleaning the premix surface and laying Seal coat (Type \\"C\\") with approved 6-7 mm. Graded grit and bitumen including Roller, Machinery annd heating the paint to the required temperature including cartage of materials, maintenance of patri and watering. |
| 18 | Constn. Of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead As per Technical specification clause 303.1 ( For Patri) |
| 19 | Constn. Of embankment with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.1 & 300.2 with lead upto 1000m. As per Technical sp |
| 20 | Providing, laying and spreading materials on a prepared sub grade, adding cement @ 2% by weight to the spread materials manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. |
| 21 | Providing, laying and spreading materials on a prepared sub base, cement @ 4% by weight to the spread materials manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base. |
| 22 | Providing and applying tack coat with bitumen (V.G.10) using pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous surface cleaned with machanical broom as per 503 of MORD data book |
| 23 | Providing and applying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penitation grade bitumen or emulsion to require line grade and level to serve as vearing coarse on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grates to be followde by seal coat or either as per Technical Specification Clause 508 |
| 24 | Cleaning the premix surface and laying Seal coat (Type \\"C\\") with approved 6-7 mm. Graded grit and bitumen including Roller, Machinery annd heating the paint to the required temperature including cartage of materials, maintenance of patri and watering. |
| 25 | Constn. Of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead As per Technical specification clause 303.1 ( For Patri) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender