Tender For B.O.Q For Installation Of Two Pot Garden Lights And Cctv Cameras At Sherwani Colony Khwajabagh Park Baramulla
Tender Value
9.38 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
13 days left
EMD
18760
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for B.O.Q For Installation Of Two Pot Garden Lights And Cctv Cameras At Sherwani Colony Khwajabagh Park Baramulla
BOQ
| Sl. No. | Item Description |
| 1 | SITC of 2.5mtr decorative combo pole with 30W LED Post-Top Fitting made out of cast iron base of 625mm long and top 76mm MS Tube, having arrangement of 2 No's Flower Pot as per drawing. The pole having integral service connection box duly cover the same. The pole shall be primer & painted with polyurethane paint make ,Hi-Lite,/signify pvt India ltd/Homdec, Pole to be approved and inspected at OEM before its delivery. The expenses of boarding, lodging of two nominated inspection officers shall be borne by the successful bidder. The total height of pole shall be 2.5 m excluding the height of 0.58m of top luminarie. |
| 2 | SITC of 30 watt LED IP-65 fully weather proof LED Post-Top fitting made out of die cast Almunium, housing single piece bottom upto mounting of 60 mmOD Pole/pipe , size of fitting 580mm*340mm( Nominal) with opal acrylic protector duly silicon filled,UV Resistant P.U/Powder coated paint, lacquer coated as approved by not less than SDO. Further colour with highly effacing electronic external driver,high voltageprotection, power LED white/warm white mounted on MCPCB with better heat dissipation arrangement duly wired upto connector complete etc as required. Make of LED Phillips/Hi-lite/Wipro |
| 3 | Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 1.5ʹ x 1.5ʹ x 3ʹ) as *(1ʹ above ground & 2ʹ under ground in Height) including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C) with 04 No. of foundation bolts supplied with the pole and embedded in the concrete,6\\" dia. hollow space shall have to be provided in the concrete block for cable loop in and loop out.The job includes all charges (Complete Job).The Job Shall be Monitored by concerned sub-division baramulla site incharge (Civil Engineer) |
| 4 | Providing service connection to be carried from pole junction box to luminaries using 3x1.5 Sq.mm FR-LSH multistrend copper wire confirming IS 694 ammended upto date of Polycab/Havells/AnchorMake. |
| 5 | Providing of Pole Earthing Using 20mm GI Rod 10 ft to be driven Underground and connected with pole at earthing point through 8 SWG Wire including required Sizes/numbers of nuts bolts and thimbles Complete Job. |
| 6 | Supply/Laying/Testing and Commissioning of following Al armored PVC cable withstand voltage of 650/1100V confirming to IS:1554(Part-I) Havells Make .The laying of cable shall be carried through existing HDPE Pipe carefully, to avoid any insulation damages/Kengs |
| 7 | 2-Core 16 sq mm Steel Armoured |
| 8 | 2-Core 25 Sq.mm Steel Armoured |
| 9 | Supply and laying of 2 inch dia HDPE pipe of Standard make having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 01Feet including excavation and Refilling the Trench. The Job includes repairing of the Roads and lanes which shall get effected due to this by way of laying cement concrete etc. |
| 10 | Design,Supply, Installation, Testing and Commissioning of CPRI Approved (IS/IEC:61439) Main LT Control Double Door feeder panel outdoor type fabricated out of 16 gauge sheet steel. The feeder panel should have standing rain/ dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter, R/Y/B Phase-indicators etc & angle iron 50x50x6mm stand painted in black colour of 2.5 feet height above ground level and underground 1.5 ft to be grouted in cement concrete block of suitable size with the cc ratio of 1:2:4 mix. (However the angle iron stand overall height 4 ft shall be increased or decreased upto 1.5 foot depending upon site conditions)The feeder shall be suitable size in length breadth and height to be fitted inbuilt the following items:-Incoming: 100 Amp-2 pole,35kA MCB with extended terminals Adjustable Thermal & Fixed Magnetic L&T/ABB/Legrand/Simens Make.Outgoing: 150 Amp TPN Al. Bus bar & 02 No. 32 Amp 2 pole DP MCB L&T/Legrand/Schneider/Microtek Make.Further the Feeder Panel shall have provision to accomodate 08 NO single pole MCB’S of required capacity and also having sufficient space for cable entries at the bottom side. In addition the feeder shall be provided with a set of indicator,volt/ampere meter, selectro switches,CTs & Auto Electronic ON-OFF Digital Timer switch and required capacity of contactor. for operation of day light control to Auto operation of illumination lightings.The Job Shall also include Single Phase inbuilt Digital voltage stabilizer of 3.5 KVA rating of reputed make as desired by SDO. |
| 11 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job. |
| 12 | Supply and Erection of 06 Mtr Galvanized Iron pole with galvanizing done in single dip. (Average coating. thickness Minimum 65 Microns) continuously tapered poles having Octagonal Sections designed to withstand the maximum wind speed as per Is 875, The pole shaft shall he made from shear steel (47 Steel Conforming to grade 536510) and Confirming to BS&N 1002, and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with tha rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing.Technical Specification:- 1) No. Of Section 1 NO. (2) No of sides 8 NOS. (3) Base plate size 225 X 225 MM (4) Base plate thickness 12 MM (5) Base plate hole PCD 225 MM (6) No of holes 4 NOS. 7) Hole dia 24 MM / SLOTTED (8) Size of door opening 250 MM (9) Pole section length 6000 MM 10) Pole section Theckness 3 MM (11) Bottom Dia ( Outer ) 130 MM (12) Top Dia ( Outer ) 70 MM (13) Foundation Bolt Length 550 MM (14) Foundation Bolt Dia 20 MM (15) Wind Speed 180 Km / Hr (16) Dimension Tolerance As Per BSEN 40 (17) Material Tolerance As Per IS 1852 - 1985 18) Shaft Material Type As Per BSEN 10025 S 355 Or Equivalent (19) Base Plate Type As Per IS 2062 (20) Foundation Bolt Type As Per IS 1367 Gr. 6.8 (21) Material Protection Hot Dip Galvanized (22) Zinc Coating Thickness 65 Microns (23) Galvanizing Type AS PER ISO 1461 : 1999 (24) Finishing Type As Per IS 11759 - 198. The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB inside the pole at door opening for cable connection,BPP Make. Also includes Supply/Fixing of 8 SWG G.I wire run over the cable length properly earthed with main earthing pit/grid (Standard make) |
| 13 | Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 1ʹ x1ʹ x 3ʹ)having 2.5ʹ U/G & 0.5ʹ A/G including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job) with Following Procedure & All as per pre approved by Engineer in charge:-A) Excavation of Pit for Foundation Size upto required depth from Ground levelB) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete.C) Providing and laying in position cement concrete of M-10 grade of 75 mm thicknessD) Reinforcement for R.C.C. work with MT bars including straightening, cutting, bending, placing in position and binding all complete.E) Centring and shuttering including strutting, propping etc. and removal of form work for Footing and PedestalF) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations.G) Providing and Laying Reinforce cement Concrete of M-25 grade In footing and Pedestal including Curing the foundation for 7 days. |
| 14 | Supply/Installlation/Testing & Commissioning of 5MP IR Dome PTZ with 37X or above Optical Zoom and 300 Mtr or above IR Distance. 1/ 2.8” CMOS Sensor. 5MP, 0Lux with IR LED on. 37x or above Optical Zoom, 16x Digital Zoom. IR LEDs with IR Distance of 300m or above, MTBF >100,000 hours. Video Analytics: Tripwire, Perimeter Object Abandon, Loitering, etc. H.265/H.264/M-JPEG, ONVIF S, G, T Compliance. PoE Support, NAS Storage, SD Card Support (512GB), Quad Stream Support, 1/1 Audio I/O, 2/2 Alarm I/O. STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10 on Metal housing, IP67, NEMA 4X CP Make |
| 15 | Supply/Installlation/Testing & Commissioning of 5MP IR Bullet Camera Fixed 4.0mm Lens with IR Range of up to 50 meters. 1/2.8” - CMOS Sensor. 5MP, 0Lux with IR LED on, 4.0 mm. IR Range of up to 50 meters. Video Analytics: Trip Wire, Intrusion Detection and Motion Detection. H.265/H.264/M-JPEG Video Compression. PoE Support, NAS Storage, SD Card Support (512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm I/O. True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB. STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X of CP Plus Make. |
| 16 | SITC of 24 inch LED Monitor Samsung/Dell/LG/Eq.make |
| 17 | SITC of 8-Channel Network Video Recorder (NVR), H.265+, HDMI/VGA output, network ports, complete Job CP Plus/Honey-Well/Eq.make |
| 18 | SITC of 4 TB Surveillance Hard Disk compatible with NVR Western Digital( WD Purple)/Seagate (Sky-hawk)/Eq.make |
| 19 | SITC of 8-Port Gigabit PoE Switch (minimum 120 W PoE budget) CP Plus/D-Link/Eq.make |
| 20 | SITC of Cat 6 UTP Cable D-Link/Molex/Eq.make |
| 21 | Supply of RJ45 Cat 6 Connectors D-Link/Molex/Eq.make |
| 22 | Supply and fixing of weatherproof Camera Junction Boxes CP Plus/Hikvision/Eq.make |
| 23 | Supply and laying of PVC Conduit/Casing-Capping with accessories Anchor/Ravindra/Eq.make |
| 24 | Supply of 2 m Cat 6 Patch Cords D-Link/Molex/Eq.make |
| 25 | SITC of 6U Wall-Mount Network Rack with PDU, fan, and accessories D-Link/Molex/Eq.make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender