Tender For Repair Of cement concrete Road From Pijush Kanti Roy House To Kalyan Kumar Roy House Under Per Mekhliganj Gp Within Haldibari P.S.
Tender Value
4.36 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
8734
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coochbehar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of cement concrete Road From Pijush Kanti Roy House To Kalyan Kumar Roy House Under Per Mekhliganj Gp Within Haldibari P.S.
BOQ
| Sl. No. | Item Description |
| 1 | By Mix in Place-Construction of granular sub-base by providing graded materials such as natural sand|crushed gravel|crushed stone|combination depending upon the required grading, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401Rate per cum for grading-I Material |
| 2 | Construction of un-reinforced, dowel jointed, plain cement concrete pavement of specified grade with characteristic flexural strength of concrete not less than 4.5 MPa over a prepared sub base as per clause 602 of MORT&H's specification 2013 and cement content as per clause 602.3.2, coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates of approved variety combined gradation as per Table 600-3 of MORT specification 2013, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a batch mix plant with weigh batching facility as per approved mix design done as per IRC:44, transported to site, laid with a slip form paver with electronic sensor, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant as per IRC:57, debonding strip, dowel bar, tie bar, admixtures as approved, tinning, texturing, curing, finishing to lines and grades as per drawing (Reference to MORT&H's specification 602 along with IRC 15). |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 4 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c|c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender