Tender For Construction Of Mastic Asphalt Road From Thana Road To The Head Of Kalidas In Ward No.-13 Under Dhupguri Municipality, Dist. Jalpaiguri. (Sl No-11)
Tender Value
37.79 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
75583
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mastic Asphalt Road From Thana Road To The Head Of Kalidas In Ward No.-13 Under Dhupguri Municipality, Dist. Jalpaiguri. (Sl No-11)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Flexible Pavements Dismantling of flexible pavements anddisposal of dismantled materials up to a lead of 1000 metres, stackingserviceable and unserviceable materials separately II) By Mechanical Means A) Bituminous course Mes: 400.00X3.00X.01=120.00 Cum |
| 2 | Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). By Manual MeansGrading-II(Table 400-9) using North Bengal Variety MaterialsUsing Screening (Table 400-10) Type-B (11.2 mm aggregate)Mes: 400.00x3.00x0.1=120.00 Cum |
| 3 | Prime CoatProviding and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). i) On WMM/WBM surface @ 0.85kg /sqm. Using Cationic CSS-1 Mes: 400.00X3.00=1200.00 Sqm |
| 4 | Bituminous MacadamProviding and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). With Continuous Type HMP (40-60 TPH) (i) for Grading 1 ( 40 mm nominal size ) Mes: 400.00X3.00X0.075=90.00 Cum |
| 5 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i) On bituminous surface @ 0.25kg /sqm Using Cationic RS-I Mes: 400.00X3.00=1200.00 Sqm |
| 6 | Providing and laying mastic asphalt by mechanical means done in a centralised batching plant with appropriate built- in pollution control units with specified aggregates and lime stone powder (with Calcium Carbonate content not less than 80%) and approved grade of industrial grade bitumen as per approved design mix,transporting the hot mastic ashphalt to the worksite by thermocontainer with the arrangement of maintaing specified temperature during transport, laying with a paver finisher for spreading and floating the plastic mix uniformly on the surface to the specified width and thickness at correct grade and camber through its heated, distortion free steel float and turning sword distributors, applying uniform size of bitumen coated stonechips at a specified rate, on the laid surface through a power driven chip spreader as per the procedure laid down in Annexure - II of IRC : 107 (2013) all complete as per clause 516 along with IRC : 107 for materials and design mix etc. 25 mm thick Industrial grade Bitumen (10/20 Grade) (Bulk) bitumen @ 5.715 kg/sqm & VG-30(Bulk) Bitumen @ 0.014 Kg/Sqm. Mes: 400.00X3.00=1200.00 Sqm |
| 7 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M15 (Including shuttering) N B Variety Mes: 400.00X2.00X0.3X0.6=144.00 Cum |
| 8 | Sub total cost of Civil Works [including CLW Cess]:[Sum of sl.(1) to sl.(7)] |
| 9 | Value of LW Cess : 1% |
| 10 | Total Cost of Civil Works [exclcluding CLW Cess]: |
| 11 | GST @18% over Civil Works: (8) x 0.18 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender