Tender For Repairs To Drain, Path, Culvert, Shed, Fencing And Other Connected Items At Omq Area At Af-I Under Ge (Af) Jamnagar No.2
Tender Value
40 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
9 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Drain, Path, Culvert, Shed, Fencing And Other Connected Items At Omq Area At Af-I Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of paver block including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 2 | M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in Sub base all as specified and directed. |
| 3 | M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade fixed over and including 25mm thick sand coushioning complete all as specified and directed. |
| 4 | M & L for Chequered cement concrete tiles 300mm x 300mm x 25mm thick, set,over Screed bed or bedding layer of mortar (1:6) 15 mm thick for laying floor finishes jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 5 | Relaying machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade. |
| 6 | M & L 75mm thick granite stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush |
| 7 | Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed. |
| 8 | M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms laid over and including 15 mm thick screed bed in CM 1:6, including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete. |
| 9 | M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen plateform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete. |
| 10 | M &L for 18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement mortar in 1:4 base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 11 | M&L for rounding to edges of Granite/ Kota stone slabs edge, such as in steps cooking plateform, and other similar situation. |
| 12 | Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination all as Specified. |
| 13 | M&L 100 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) as in floor/ hard standing etcfinishing the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal, whilst the concrete is green all as specified. |
| 14 | M&L 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement and complete all as directed. |
| 15 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 16 | M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed. |
| 17 | M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 18 | M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 19 | M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 20 | M&L for light shed vitrified coloured tiles not less than 10 mm thick of size exc 0.38 sqm in floors/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in CM 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 21 | M&L for Glazed ceramic tiles in vertical surface 300x 450x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified. |
| 22 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. all specified and directed. |
| 23 | M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 24 | M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately |
| 25 | M&L for 5 mm thick rendering in cement mortar 1:3 on on ceiling, ifinished the surface even & smooth without using extra cement complete all as specified and directed. |
| 26 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 27 | M & L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat of chalk whitening compatible primer complete. |
| 28 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of primer complete all as specified |
| 29 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge. |
| 30 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 31 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 32 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete. |
| 34 | M & L Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 35 | M & L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 |
| 36 | M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 38 | Excavating soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 39 | M & L PCC (1:3;6 ) type C2 using 40 mm graded aggregate cement concrete in foundation. |
| 40 | S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. |
| 41 | S & F 5 to10mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 42 | S & F Mild steel bars 10mm dia and over (Fe-410 Gde-E-250), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 43 | Dismantling fencing wite mesh, any type |
| 44 | Supply only MS galvanisd fencing, size 50mm X 50mm or any type |
| 45 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 46 | S & F in repairs concertina coil of 1050mm/600mm/450mm dia opened with standerd specification on angle iron above boundary wall and other places as directed by Engr- in - Charge. |
| 47 | S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all specified and directed. |
| 48 | Excavating in trenches in soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in soft/loose soil. |
| 49 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 50 | M&L PCC 1:3:6 type C2 using 40mm graded stone as in surface channel and drains, all as specified and as directed. |
| 51 | M &L Providing, cement concrete in coping or mud stops, rounded or chamfered on edges type Bo 1:2:4 (12.5mm graded aggreagte ) |
| 52 | Returning, filling including spreading, watering and well ramming in layers n.exc 25 CM in soft/loose and hard/dense soil |
| 53 | Removing excavated material upto 250m and depositing where directed at a level n.exc 1.5M above the starting point all as specified and as directed. |
| 54 | Demolition of brick work/ stone work /PCC block masonry built in Cement mortar complete all as specified and directed |
| 55 | M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:5:8) 20mm graded aggreagate, complete |
| 56 | M&L for rendering 15 mm thick in CM 1:4 using on other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed. |
| 57 | M&L for preparation of old decorated surfaces of walls and providing one coat of plastic emulsion paint complete all as specified and directed. |
| 58 | M&L for preparation of old decorated surfaces of floor and providing one coat of Terracotta paint incl earthy color and specialized finish inspired by natural complete all as specified and directed. |
| 59 | M&L for complete removal of existing treatement & providing and applying high-quality imported acrylic-based granular textured exterior wall finish of approved make and shade, similar to \\"Ultima Allura Granada\\" or equivalent, comprising advanced acrylic copolymer in aqueous dispersion, to achieve a uniform grainy/ textured granite-like appearance on exterior surfaces. The finish shall be suitable for exterior masonry / concrete/ plastered surfaces, providing durable weather-resistant protection and an aestheticaly uniform textured finish. The work shall include surface preparation, cleaning, filling of minor imperfections, application of suitable compatible primer / sealer and texture finish in the manufactuer's recommended number of coats and thickness, including all materials, labour, scaffolding, tools and tackles, mixing application and finishing complete as per manufactuer's specifications and direction of Engineer-in-charge. |
| 60 | S & F Powder coated Aluminium grills Deco-grill Model DG-104(7mmx4mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,completed and directed by Engr-In-Charge. |
| 61 | Dismantling expanded metal, any thickness or mesh, fixed with steel,n exc 4 kg per sqm |
| 62 | Running welding in repairs exc 6mm and nexc 9mm |
| 63 | S & F n exc 4 kg welded steel wire fabric supplied and fixed complete to wood or steel members Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender