Tender For 07 X Building And Roads At 25 Wg Under Ge (Af) Gurgaon
Tender Value
45.53 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 07 X Building And Roads At 25 Wg Under Ge (Af) Gurgaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/Disintegrtated rock complete all as specified. |
| 2 | Removing excavated material to distance not exc 50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified. |
| 4 | M&L for providing reinforced cement concrete (nominal mix) type B1 (1:2:4) using 20 mm graded stone aggregates as in slabs supported on walls,beams and columns in floors,roofs, complete all as specified. |
| 5 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed. |
| 6 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 7 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified. |
| 8 | M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified. |
| 9 | M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified. |
| 10 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacurers instructions over a backing coat of 10mm thick in CM 1:4 on concrete or brick masonry surfaces and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 11 | Supply only integral water proofing compound of approved make |
| 12 | M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified. |
| 13 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 15 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 18 | M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc complete all as specified. |
| 19 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified. |
| 20 | M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified. |
| 21 | M&L for Non - skid (joint free) coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 22 | M&L for Glazed ceramic coloured tiles in vertical surface 600X300X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 23 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface complete all as specified. |
| 24 | M & L for 75 mm thick, PCC 1:3:6, Type C-1, using 20mm graded stone aggregate as in plinth protection, surfaces finished even and smooth complete all as specified and as directed. |
| 25 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified. |
| 26 | All as per item No. 25 here-in-before but 20mm dia . |
| 27 | Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 28 | Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the walls etc.) |
| 29 | Supply and fixing in CPVC 25mm Tank Adaptor |
| 30 | Supply and fixing in CPVC 25mm Ball valve |
| 31 | S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified. |
| 32 | S&F in repair Vitreous China wash basin, white, flat back of size 550x400mm with pedestal including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including cutting for and pinning in ends of brackets complete all as specified. |
| 33 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified. |
| 34 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified. |
| 35 | S&F in repair vitreous china Counter top Wash hand basin (White) of size (470x470x200 mm) mm complete all as specified. |
| 36 | S&F in repair Snow white vitreous China wash down water closet pan with Flushing Cistern in one piece (pedestal pattern) of size 660x350x745mm S trap 220mm including slim soft close seat cover complete all as specified. |
| 37 | S&F in repair vitreous China urinals, half stall type , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including one number chromium plated waste fittings, 32 mm dia. (Inclusive fixing supply waste pipe) |
| 38 | S&F urinal spreader of chromium plated for fixing with 15 mm dia pipe complete. |
| 39 | S&F in repair vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete as specified. |
| 40 | S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 41 | S&F chromium plated health faucet telephonic type with 8mm dia, 1 meter long CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified. |
| 42 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified. |
| 43 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 44 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. |
| 45 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 46 | S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified. |
| 47 | S&F in repair Pillar cock with swan neck spout (left/right) and aerator , 15mm bore chromium plated fancy type complete all as specified. |
| 48 | S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified. |
| 49 | S&F in repair for 15 mm dia stop valve/angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified. |
| 50 | S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified. |
| 51 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than88 gms. |
| 52 | S&F in repair 25 mm dia PVC gate valve , screwed both ends for pvc pipe complete all as specified. |
| 53 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 54 | Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site. |
| 55 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 57 | S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified. |
| 58 | S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed. |
| 59 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 60 | Dismantling of cast iron pipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified. |
| 61 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified. |
| 62 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified. |
| 63 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified. |
| 64 | S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified. |
| 65 | S&F 75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified. |
| 66 | S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified. |
| 67 | S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified. |
| 68 | S&F PVC gully traps (150X150) mm, square or round mouthed, type 'P' complete all as specified. |
| 69 | M&L PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified. |
| 70 | S&F 110mm PVC (SWR) WC connector bent type complete. |
| 71 | Removing bldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed. |
| 72 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified. |
| 73 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified. |
| 74 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. |
| 75 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified. |
| 76 | Providing edge moulding to 18-20 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. Complete to Granite stone any description. |
| 77 | Surface dressing n exc 15 cm deep getting out soft/loose soil. |
| 78 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified. |
| 79 | M&L for 75 mm thick cement concrete type D-2 1:4:8 with )using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified. |
| 80 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified. |
| 81 | M&L for 22-25 mm thick chequered designer coloured tiles (matt/glass finish), size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified as directed. |
| 82 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified and as directed. |
| 83 | Demolition of cement concrete of any description and in any position including padding concrete etc all as specified and as directed |
| 84 | M&L for Plain Cement Concrete Type 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and posts concrete complete all as specified and directed. |
| 85 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, build in CM (1:6) complete all as specified and as directed. |
| 86 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified. |
| 87 | M&L for 100 mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in subbase of flooring. |
| 88 | M&L for 100 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) laid in pannels and forming construction joint as in path and hard standing finished even and smooth without using extra cement including filling joints with bitumen and sand mix complete all as specified and directed. |
| 89 | M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) in plinth protection and hard standing finish even and fair complete all as specified and directed. |
| 90 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specifeid and as directed. |
| 91 | M & L for Reinforced cement concrete (nominal mix) type A-0 1:1.5:3 (12.5 mm graded aggregate) slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves etc and the like complete all as specified. |
| 92 | Material and labour for providing plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in surface channel and drains complete all as specified and as directed. |
| 93 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends. |
| 94 | M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, rendering finished even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for preparation on newly plastered / previously untreated surfaces of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) complete all as specified and directed. |
| 96 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 97 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 98 | Dismantling of asbestos cement (corrugated, semicorrugated, plain etc.) sheets in roof coverings complete all as specified and as directed. |
| 99 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed. |
| 100 | S&F for pre-painted Galvalume aluminium zinc cooating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in covering/cladding to wall fixed with self tapping screws all as specified and directed. |
| 101 | Dismantling wrought iron mild steel work of any descrption not other wise provided for complete all as specified and as directed |
| 102 | S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-W (Gde E- 250) quality A complete all as specified. |
| 103 | S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of any shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1979 garde St-240 |
| 104 | M&L for preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified |
| 105 | M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint complete all as specified . |
| 106 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil vomplete all as specified and as directed. |
| 107 | Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in hard/dense soil, complete all as specified and as directed. |
| 108 | M&L for cement concrete type B-1, 1:2:4 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 109 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade complete all as specified and directed. |
| 110 | M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete. |
| 111 | S&F Factory made machine pressed Chequered cement concrete colour tiles 30 cm X 30 cm X22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 112 | M&L for PCC 1:3:6 typeC1 using 20mm gradded aggregate as in coping,cills ,string courses,apex stone,bed plates,kerbs etc. and necessary formwork all as specified. |
| 113 | M&L for preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified |
| 114 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outsoft/loose soil complete all as specified and as directed. |
| 115 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level).all as specified and directed. |
| 116 | M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 117 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified. |
| 118 | S&F 18 mm thick 100% solid WPC(wood polymer composit) plain board (minimum density 650 kg/cum) fixed with screws, solvent cement/adhesive to make kitchen cabinet sides, top & bottom shelves inside the cabinets. Complete all as specified & directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory by the manufacturing company. |
| 119 | S&F 18 mm thick 100% solid WPC(wood polymer composit) plain board (minimum density 650 kg/cum) of 1 side prealm/Rigidlam and the other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters. Complete all as specified and directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory by the manufacturing company. |
| 120 | S&F 12 mm thick 100% solid WPC(wood polymer composit) plain board (minimum density 650 kg/cum) fixed with screws, solvent cement/adhesive to make kitchen cabinet back and pull out drawer sides. Complete all as specified & directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory by the manufacturing company. |
| 121 | S&F auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed. |
| 122 | S&F stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters complete all as specified and directed.. |
| 123 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. Note :- OBD to be measured & paid saperately. |
| 124 | M&L for preparation of plastered or unplastered old decorated surfaces of wall by complete removal of existing treatment including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 125 | M&L for preparation of old treated plastered or unplastered surfaces of ceiling by complete removal of existing treatment by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed |
| 126 | M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 127 | M&L for Plain fillets 2nd class hardwwod exc 6 sqcm but n.exc 13 sqcm. square, rectangular or triangular in section, clean sawn, fixed with coach screws, plugging to wall/floor complete all as specified and as directed |
| 128 | M & L for Second class clean sawn timber framed and fixed hard-wood in scantlings all as specified and directed |
| 129 | S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified. |
| 130 | S&F 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified. |
| 131 | S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 132 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 133 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 134 | S&F 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 135 | S&F 100 mm Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 136 | S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete. |
| 137 | S&F 150mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 138 | M&L for reinforced concrete pipes 150 mm dia, class NP-2, laid and jointed complete with collars complete all as specified. |
| 139 | M&L cement concrete 1:3:6 type C-2 for 150 mm dia in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested etc complete all as specified. |
| 140 | Supply and Fixing in repairs, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 141 | Construction of RCC septic tank of 10 user's including on site designed to carry sewage and excavation in any type of soil, foundation in PCC 1:4:8, walls of soild brick in CM 1:4, RCC baffle wall, RCC cover slab in M-25 including SFRC manhole cover, MS rungs, Vent shaft, connection etc. complete with effective depth of 1.5 mtr and overall depth of 3.0 mete rcomplete all as per specified and shown on drg No.CEJZ/STD-263/90 Sheet No. 1/9 to 9/9. |
| 142 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats of size 1.2 mtr dia and 3.00 mtr in effective depth complete all as specified and shown on drg No.CEJZ/STD-301/90 Sheet No. 1/4 to 4/4. |
| 143 | Removing excavated soil to a distance exc 250 m but n.exc 500 m and depositing where directed complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender