Tender For Provision Of Klp Accn At Rangapahar Under Ge 868 Ews
Tender Value
29.29 Crore
Estimated cost
Bid Submission
13 Oct 2026
31 days left
EMD
15 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dimapur → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Klp Accn At Rangapahar Under Ge 868 Ews
BOQ
| Sl. No. | Item Description |
| 1 | \\"REVISED BOQ \\" BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Chief Engineer Shillong Zone NAME OF WORK: PROVISION OF KLP ACCN AT RANGAPAHAR UNDER GE 868 EWS Contract No: CESZ/RANG/ OF 2026-2027 Bidder Name : GENERAL SUMMARY (SCHEDULE OF WORKS) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # Sl.No. Description of Parts/ Item Item Code / Make No. orQty. Unit Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Figure TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. |
| 3 | Lumpsum price workedout by the tenderer for BUILDING & STRUCTURE WORKS as listed in Schedule ‘A’ Part-I |
| 4 | Lumpsum price worked out by the bidder/ tenderer for SITE CLEARANCE, DEVELOPMENTS & EARTH WORKS as listed in Schedule 'A' Part-II. |
| 5 | Lumpsum price worked out by the bidder/ tenderer for INTERNAL WATER SUPPLY as listed in Schedule 'A' Part-III. |
| 6 | Lumpsum price worked out by the bidder/ tenderer for ROAD, PATH, HARD STANDING AND CULVERT as listed in Schedule 'A' Part-IV. |
| 7 | Lumpsum price worked out by the bidder/ tenderer for SEWAGE DISPOSAL as listed in Schedule 'A' Part-V. |
| 8 | Lumpsum price worked out by the bidder/ tenderer for FENCING AND GATE as listed in Schedule 'A' Part-VI. |
| 9 | Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-VII. |
| 10 | Lumpsum price worked out by the bidder/ tenderer for RETAINING WALL AND PROTECTIVE WORKS as listed in Schedule 'A' Part-VIII. |
| 11 | Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule 'A' Part-IX. |
| 12 | Lumpsum price worked out by the bidder/ tenderer for AIR CONDITION AND REFRIGERATION (SUMMER APPLIANCES) as listed in Schedule 'A' Part-X. |
| 13 | Lumpsum price worked out by the bidder/ tenderer for LIFT as listed in Schedule 'A' Part-XI. |
| 14 | Lumpsum price worked out by the bidder/ tenderer for TELEPHONE / TV SOCKET as listed in Schedule 'A' Part-XII. |
| 15 | Lumpsum price worked out by the bidder/ tenderer for LIGHTNING PROTECTION as listed in Schedule 'A' Part-XIII. |
| 16 | Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-XIV. |
| 17 | Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule 'A' Part-XV. |
| 18 | Lumpsum price worked out by the bidder/ tenderer for HOT WATER SUPPLY as listed in Schedule 'A' Part-XVI. |
| 19 | Lumpsum price worked out by the bidder/ tenderer for CLOTH WIRE POST as listed in Schedule 'A' Part-XVII. |
| 20 | Lumpsum price worked out by the bidder/ tenderer for DEMOLITION AND DISMANTLING as listed in Schedule 'A' Part-XVIII |
| 21 | Sch 'A' Sec-XIX (Miscellaneous Items) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only. |
| 22 | Supply and installation of 4000 Liter capacity LLDPE (Linear Low-Density Polyethylene) septic tank with dimensions of, 2.07 meters in diameter, and 2.51 meters in height for 25 users. It is equipped with 160 mm diameter inlet and outlet connections complete all as specified and directed.Note: Cost for transportation, excavation, proper bedding, positioning, connection to the sewer network, and back filling shall deem to be included in the quoted rate of this item. |
| 23 | M&L for RCC Septic tank conventional type for 100 User complete all as specified and directed. |
| 24 | M&L for soakage wells 1.20 m x 3.0 m including excavation, soil filling, brick bats, honey combed masonry, precast slab, coping and SFRC Manhole cover complete all as specified and directed |
| 25 | M&L for soakage wells 3.6 m x 3.0 m including excavation, soil filling, brick bats, honey combed masonry, precast slab, coping and SFRC Manhole cover complete all as specified and directed. |
| 26 | S&F TV Socket 1 Module complete all as specified and specified. |
| 27 | S&F RJ 11 Tele phone Socket 1 Module complete all as specified and specified. |
| 28 | Supply and installation of refrigerator, electric driven (single phase), capacity 195 Litres (min), BEE 3 star rated complete all as specified and directed. |
| 29 | Supply and installation of refrigerator, electric driven (single phase), capacity 310 Litres, BEE 3 star rated complete all as specified and directed. |
| 30 | Supply, install, testing and commissioning of voltage stablizer for automatic operation, single phase, naturally air cooled, indoor type, designed for input variation between 170V to 250V with stablized output voltage at 230V with accuracy of ±2.5% and of capacity 1.0 kVA complete all as specified and directed. |
| 31 | Supply, install, testing and commissioning of voltage stablizer for automatic operation, single phase, naturally air cooled, indoor type, designed for input variation between 170V to 250V with stablized output voltage at 230V with accuracy of ±2.5% and of capacity 0.5 kVA complete all as specified and directed. |
| 32 | Design, supply, install, testing and commissioning of commercial type wall mounted electric chimney made out of 16 SWG (304) Stainless steel with front turned down, angular frame work fully welded suitable for two burner Indian cooking range 48\\" x 24\\" x 34\\" and three Burner Indian cooking range 66\\" x 24\\"x 34\\" complete consisting of following items:-(i) Low height stock pot 24\\" x 24\\" x 24\\" with stainless steel hood (30\\" x 30\\" x 22\\")(ii) Stainless steel Hood 48\\" x 30\\" x 22\\"(iii) Stainless steel Hood 66\\" x 30\\" x 22\\"(iv) Three nos 18\\" Heavy duty exhaust fans of approved MES makes above Stainless Hood.(v) Electrical works such as point wiring with suitable size of wire. switch, socket outlet, ceiling rose, MCB DB etc of approved make in MES shall be provided as per OEM specifications.(vi) Stainles steel exhaust pipe covering shall be provided as per OEM specification.Note: Any other essential accessories not mentioned herein above specification but technically required for complete fuction of system, shall be part of contract and the cost is deemed to be included in the quoted rate. |
| 33 | Design, supply, install, testing and commissioning of commercial type wall mounted electric chimney made out of 16 SWG (304) Stainless steel with front turned down, angular frame work fully welded suitable for two burner Indian cooking range 48\\" x 24\\" x 34\\" complete consisting of following items:-(i) Low height stock pot 24\\" x 24\\" x 24\\" with stainless steel hood (30\\" x 30\\" x 22\\")(ii) Stainless steel Hood 48\\" x 30\\" x 22\\"(iii)One no 18\\" Heavy duty exhaust fans of approved MES makes above Stainless Hood.(v) Electrical works such as point wiring with suitable size of wire. switch, socket outlet, ceiling rose, MCB DB etc of approved make in MES shall be provided as per OEM specifications.(vi) Stainles steel exhaust pipe covering shall be provided as per OEM specification.Note: Any other essential accessories not mentioned herein above specification but technically required for complete fuction of system, shall be part of contract and the cost is deemed to be included in the quoted rate. |
| 34 | Design, supply, erection, testing and commissioning of Roof Top Solar Power Generation plant of capacity 48 kWp, at AC output voltage 415 volt, 50 Hz, ON GRID HYBRID Solar Roof top with batteries back up for captive use as per specification & complete with structure and foundation comprises design and construction of foundation, civil supporting structure, modules, inverters, DC junction, Distribution & combiner boxes, AC junction & combiner boxes, lightning arrester, weather station, SCADA system, earthing, connecting wires/cables with all accessories required for SPV complete all as per MNRE/SECI specifications and technical specifications complete all as specified in particular specification.Note : Contractor shall also ensure the followings:- (i) Annual maintenance for a period 05 years from the date of completion is included in this item(ii) Arrangement of all required work, access permissions shall be made available to work force of the contractor by the GE through Security Officer (ii) Repairing of all installations if required will be carried out on site or at service center. Quoted rates shall be inclusive and includes for required spares, services, labour, handling and transportation charges etc. (iii) The Engineer/Electrician shall submit reports in soft copy format as required by the Engineer-in-Charge (iv) Security of all SPV equipments shall be complete responsibilities of Station Authorities. (Off Admin Bldg = 01 No 48 Kwp and Single living OR/Hav = 01 No. 48 KWp)Note: 25% payment of this item shall be retained from RARs / Final bill for comprehensive maintenance and shall be paid in equal installment per month or as required during the execution of comprehensive maintenance for the period of 05 years from the date of completion. |
| 35 | Supplying, laying in trenches, testing and commissioning of centrifugally cast (spun) ductile iron pipes of 150mm dia suitable for pressurized water delivery with spigot & socket end, class 'K9' confirming to IS:8329/2000 (latest version) with pushon rubber gasket jointing, with inside cement mortar lining and outside zinc coating with finishing layer of black bitumen epoxy coating duly ISI marked in any length complete all as specified and directed. |
| 36 | M&L for construction of brick masonary valve pit of internal dimensions 1500 mm x 1500 mm x 1000 mm depth including concrete work and construction of similar size valve pit with one brick thick wall in cement mortar (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, including PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in benching and coping and 10 mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover made out of 40x40x6mm angle iron frame all-round fixed by means of 04 Nos holdfast 150 mm long made out of flat iron 40x6 mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crused stone aggregate) of size 230x200x100 mm including provision of hinges wleded with angle iron frame and MS cover 3 mm thick MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | S&F LED aviation/obstruction light having intensity > 40 cd, die-cast aluminium body, UV stabilized optical lens for 360◦ illumination, inbuilt on-off photo cells, ERDA type tested and comforming to ICAO/FAA standards, IP 65 rated operating on 90- 270 V, 50 Hz, 1- Ph AC supply complete as specified and directed. |
| 38 | S&F MCB 6-32A, Double pole, 10kA, 'C' curve conforming to IEC 60898-1 complete all as specified and as directed |
| 39 | M&L for fabrication of Water header line from overhead tank using 'C' class MS heavy duty pipe of minimum dia 250mm, providing with both ends welded dead plugs with inlet/outlet connections as follows:-(a) Header inlet side : 01 Nos 150mm dia of suitable length MS heavy duty pipe welded at header end and drilled flange at other end for motorised butterfly valve connection with OH tank downcomer.(b) Header outlet side : 02 nos 100mm dia of suitable length & 03 Nos 80mm dia of suitable length MS heavy duty pipe welded at header end and drilled flange at deliveryside for sluice valves.(c) Bypass connection from OH tank inlet pipe to main header line connection.(d) Connecting overflow pipe with delivery pipe through NRV complete.(e) Complete including all necessary cutting, drilling, welding work as per site requirement and necessary accessories like drilled flanges, blank flange for dead plug, flanged reducers/tapers, 15mm socket end nipples for connection of water pressure sensor, suitable size GI nut, bolts, washers, rubber gaskets, PCC or brick works for support to header pipe, etc., including making necessary inlet and outlet pipe connections using special pipe fittings complete all as directed and specified.Note : (i) Quoted rate shall deemed to be inclusive of all MS fittings/pipe required for operation of header & connecting overflow with deliveryy pipe of OHT, including cost of rubber gaskets, 15/20mm GI socket/Nipple, GI nuts, bolts and washers shall be inclusive in the quoted rate.(ii) NRV shall be paid under seperate item. |
| 40 | S&F Ultrasonic type water level sensor for Over head tank suitable for upto 6m water level depth, with dead band of less than 0.6 meter, IP 66 protection, accuracy of 0.25% of /f.S and RS485 Modbus RTU communication protocol, capable for working in ambient temperature of 0 degrees to 75 degrees centrigrade, non-condensing at 25 degree centrigrade and humidity up to 95% with response time of less than 1 sec with 230 V AC to 24 V DC, 50 HZ power supply LCD display type, vertical type mounting on water tank with all connections and fixing including clamp, nits, bolts complete of size all as. The spcified level sensor shall be equipped with QR codes designed for geo-tagging purposes. These QR codes shall integrate with an asset management system, allowing for efficient tracking and management of the level sensor. By scanning the QR code, users should be able to access detailed information about the asset's location, usage history, maintenance schedules, and performance data. This system shall enhance the visibility and control over the assets, ensuring that are effectively monitored and maintined. Geo-tagging via QR codes should provide a streamlined solution for asset tracking, improving operational efficiency and reducing the risk of asset loss or mismangement. |
| 41 | S & F of SCADA ready actuated electri butterfly valve for 150 NB size water supply systems, with open area installation line pressure maximum-7 Bars , Ends-wafer, Duty -on/off, 230 V AC/24 V DC, IP 67, enclusore, insulation class F, complete with travel switch and torque switch of size 100 NB (may reduce as per site). The specified butterfly valve shall be equipped with QR codes designed for geo-tagging purposes. These QR codes shall integrate with an asset management system, allowing for efficient tracking and management of the level sensor. By scanning the QR code, users should be able to access detailed information about the asset's location, usage history, maintenance schedules, and performance data. This system shall enhance the visibility and control over the assets, ensuring that are effectively monitored and maintined. Geo-tagging via QR codes should provide a streamlined solution for asset tracking, improving operational efficiency and reducing the risk of asset loss or mismangemen |
| 42 | Supply, Installation Testing & Commissioning of outdoor type PLC (Programmable Logic Controller) / RTU (Remote terminal Unit) based Automation, Protection Panel for Valve operation during distribution time with feature of wireless Dual SIM Card based communication, suitable for control and monitoring of 02 Nos. Motorized Butterfly Valves, 01 Nos Ultrasonic level sensor, 01 Nos. electromagnetic Flow Meter. The panel should be of adequate size, front opening type, fabricated from 3.15 mm thick CRCA Sheet & mounting channel 50x50x6mm made out of Angle iron with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size. The Panel should have the following functionalities complete all as specified and directed:- (a) Water level sensing and display(b) Automatic Operation of Motor Actuated Butterfly Valves & level control of OH tank(c) Online UPS with battery system of adequate capacity. (d) Manual Mode Operation (all connected sub systems at filtration plant) from the RTU/ PLC based Control Panel.(i) Discrete Input Logic: - Sink/Source, Discrete Output Logic: - Positive Logic (Source).(ii) Should have suitable No. of Discrete Input conforming to IEC 61131-2 Type - 1 & Discrete Output: - Relay/Transistor (iii) Protocol supported : isolated serial link: Modbus master/slave and DNP 3.0 (iv) Standard supported :- ANSI/ISA 12-12-01, CSA C22.2 No 142, CSA C22.2 No 213, EN/IEC 61131-2:2007 |
| 43 | Serial item No. 2.021 continued...Additionally the panel should have following specifications:- (v) Web Services: - Integrated Web Server(vi) Should have 02 Nos. isolated RS 485 communication port, 1 Nos. Ethernet communication port with 10BASE-T/ 100BASE-TX. Should be able to latch with minimum number of Slave: - 64 Modbus TCP, & adequate DNP3.0 master/ slaves.(vii) RTU/ PLC shall be based on ARM based Controller with at least 600GHz clock frequency and 512MB RAM(viii) PLC/RTU shall be certified by NABL for electromagnetic compactability and radio distrubance standards as per CISPR22, IEC 61000-4-2:2008, IEC61000-4-3:2010, capable of sending data to multiple route and on precise location.(ix) Contractor shall consider in quoted rates for any changes in logic within 5 years of installation as per requirement of department.(x) There shall be 01 No. HMI - 10\\" Graphical Touch screen display with following specifications :(xi) 01 No. RS 485 and 01 No. USB port & Ethernet port(xii) Serial multilink, USB downloading port & Ethernet port(xiii) Support external data storage on a USB memory stick for storing production data and backing up applications.(xiv) 01 No. SMPS of suitable rating matching system requirement.(xv) Suitable No. of interposing relays of 220VAC or 24VDC coil rating and 4A contact rating.(xvi) Suitable No. of relay cards with operating voltage 24VDC, with continuous current of 5A. Card must be of 8 channel & having 8 relays.Note : (i) Contractor shall consider in quoted rates forany changes in logic till defect liability period & operation & maintenance period after installation as per requirement of department. All control cabling/wiring for complete operation is deemed to be contractor's scope. (ii) No charge towards internet and SIM card shall be paid extra by the dept. The system shall be included with SIM and internet activation and periodic recharges for 04 months trial running period including testing and commissioning and 2 yrs during defect liability period. |
| 44 | S&F electromagnetic type flow meter suitable for 150 mm bore pipe, flow range: 0 to 25 cu .mtr/hr, liquid clean /semi clean water, wire length min 10 mtr, with IP-67 protection, 1.4 KV isolation, accuracy of less than ± 0.3% of MV, linearity of 0.5 % of MV, mounting in horizontal position, water pressure: Nominal pressure upto 200 KPa, should account for the water hammer depending on the valve closure time, current output:4 to 20 mA, local indicating through LCD display and RS 485 Modbus RTU communication protocol, capable of working in ambient temperature of 0 degree Centigrade to 75 degree Centigrade and Humidity upto 95% with response time of less than 1 Sec, working on 90-250V AC, 50Hz, Body and flanged material SS 304 or higher grade steel electrode material standard hastelloy, including necessary welding work, cutting of existing MS/DI/CI/GI piupe line and inserting new XX mm bore MS pipe with necessary MS bends and straight pipe upto 06 mtr and connecting with existing pipe line with necessary flanged, nut, bolts, gasket and DI/CI specials complete all as specified and directed.) the flow meter must have inretface with computer / laptop & should be able to monitor & control from computer, quoted rate shaa also include necessary Hardware/software) Note : The cost of wires/ cables any size/ type and length required at site as per OEM,s requirements including all accessories required for proper functioning of the plant deemed to be included in the quoted rate. |
| 45 | Shifting and installation of existing distribution transformer of capacity upto 320 kVA, 11/0.433V through existing station rationalisation source complete including connection at proposed location complete all as specified and as directed. |
| 46 | M&L for construction of platform of size 3.00 x 3.00 x 2.00 m high from GL for plinth mounting of transformer of capacity 250 KVA, including excavation in trenches not less than 1 mtr, PCC (1:5:10) type E2 for foundation, brick work in cm (1:6), PCC (1:2:4) type B1 in copping, plaster 10 mm thick in cm (1:6) on brick / concrete surface, 75 mm thick PCC (1:4:8) type B1 as in sub base , 100 mm thic PCC (1:2:4) type B1 as in floring using extra cement, returning filling and removal on surplus soil, chain link fencing 1.8 m high made out of 4 mm dia of GI wire 150x100mm mesh, MS angle iron 50x50x6mm as fencing post in embeded in brick /PCC at 2 mtr interval each side as approved 1 No steel gate (3.5m clear) span with locking arrangement made out of 15 mm dia ms rod & 50x50x6 mm angle iron frame, painting with 2 coats of aluminium paint over a coat of red oxide primer and 3 coats of white washing on cement work including 2 Nos ISMB 100 mm chanel for fixing transformer including ramp of suitable size mounting of transformer and suitable size of steps/ stairs over plate form complete all as directed. |
| 47 | Supply, Installation, Testing and commissioning of Smart energy Meter (IS-16444), AC whole current, three phase, 4 wires, CT operated Smart Energy Meter of Class 0.5 S, 415 V, 50 Hz, 1b 5A complete all as specified. The meter shall communicate with Head existing End System (HES) on any of the communication technologies mentioned in IS-16444 Part-I in a secure manner. The selection of communication technology should be as per the site conditions and as per existing AMR infrastructure available in the station. The smart meter may be based on RF Mesh communication technology or Cellular communication technology. The meter shall be provided with transparent polycarbonate ABS thermoplastic box with sealing arrangements of suitable size as per the requirement of OEM of Electric meter. The cost of meter shall be inclusive of SITC of CT having Rated burden 15 VA, Accuracy class 0.5 S, frequency 50 Hz and voltage class 660V effectively earthed and CT ratio suitable as (400/5) complete all as specified and directed. |
| 48 | Fabrication, supply, installation, testing & commissioning of electrical cubical control panel board (PTTA Panel) factory assembled weather, Dust & Vermin proof, totally enclosed IP-54 protection floor mounted Outdoor factory fabricated of 3.15 mm CRCA MS sheet of suitable size, 3 phase, 4 wire, 415 Volt AC, 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium bus bar insulated with FRP heat shrinkable sleeves of relevant colour wit necessary insulators for incoming/outgoing Circuit breakers including and mounting measuring instrument such as voltmeter, Ammeter, CT’s Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6 mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete as latest edition of IS 8623, IS 13947 & IS 2147 all as specified in technical specification mentioned in PS clause and directed. (Main LT panel near Tfr) |
| 49 | Serial item No. 2.026 continued...INCOMING:-MCCB 4 pole, 400 Amps, 36 kA, Miroprocessor based electronic release with LSIG protection - 01 No.OUTGOING:-(a) MCCB 4P 250A, 36 kA, Miroprocessor based electronic release with LSIG protection - 02 No.(To FP3-Single liv OR, Cook/Din & ancillary bldg & FP4-Existing bldgs load)(b) MCCB 4P 200A, 36 kA, Miroprocessor based electronic release with LSIG protection - 02 No.(To FP1-Off bldg, Off single liv accn, Off mess & 01 Spare)(c) MCCB 4P 160A, 25 kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 01 No (To FP2-JCO single liv + JCO transit, JCO mess and ancullary bldg)(d) MCCB 4P 32 A, 16kA 'C' curve - 01 No ( To street light panel)(e) Intelligent panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs -01set(f) LED indicating lamps with colour R,Y,B - 01 setNote: Cost of plinth for mounting of panel is deemed to be included in the quoted rate. |
| 50 | Fabrication, supply, installation, testing & commissioning of electrical cubical control panel board (PTTA Panel) factory assembled weather, Dust & Vermin proof, totally enclosed IP-54 protection plinth mounted Outdoor factory fabricated of 3.15 mm CRCA MS sheet of suitable size, 3 phase, 4 wire, 415 Volt AC, 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium bus bar insulated with FRP heat shrinkable sleeves of relevant colour wit necessary insulators for incoming/outgoing Circuit breakers including and mounting measuring instrument such as voltmeter, Ammeter, CT’s Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6 mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete as latest edition of IS 8623, IS 13947 & IS 2147 all as specified in technical specification mentioned in PS clause and directed. (FP No.1- Admn bldg & Off single liv + mess) |
| 51 | Serial item No. 2.027 continued...INCOMING:-MCCB 4P 200A, 36 kA, Miroprocessor based electronic release with LSIG protection - 01 No.OUTGOING:-(a) MCCB 4P 100A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 02 No (To Admn bldg-01 & Single Offr accn-01)(b) MCCB 4P 63A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 02 No (To OC Accn-01, Offr mess-01)(c) MCCB 4P 40A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 02 No (To NCs accn-01, Spare-01)(d) Intelligent panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs -01set(e) LED indicating lamps with colour R,Y,B - 01 setNote: Cost of plinth for mounting of panel is deemed to be included in the quoted rate. |
| 52 | Fabrication, supply, installation, testing & commissioning of electrical cubical control panel board (PTTA Panel) factory assembled weather, Dust & Vermin proof, totally enclosed IP-54 protection plinth mounted Outdoor factory fabricated of 3.15 mm CRCA MS sheet of suitable size, 3 phase, 4 wire, 415 Volt AC, 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium bus bar insulated with FRP heat shrinkable sleeves of relevant colour wit necessary insulators for incoming/outgoing Circuit breakers including and mounting measuring instrument such as voltmeter, Ammeter, CT’s Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6 mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete as latest edition of IS 8623, IS 13947 & IS 2147 all as specified in technical specification mentioned in PS clause and directed. (FP No.2- JCO single liv accn + Club/Mess) |
| 53 | Serial item No. 2.028 continued…INCOMING:-MCCB 4 pole, 160 Amps, 25 kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 01 NoOUTGOING:-(a) MCCB 4 P 63A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 03 No (To 20JCO's Transit accn-01, 22 JCO accn-01, JCO club+mess-01)(b) MCCB 4 P 40A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 02 No (To Ancillary bldg-01 & Spare-01)(c) Intelligent panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs -01set(d) LED indicating lamps with colour R,Y,B - 01 setNote: Cost of plinth for mounting of panel is deemed to be included in the quoted rate. |
| 54 | Fabrication, supply, installation, testing & commissioning of electrical cubical control panel board (PTTA Panel) factory assembled weather, Dust & Vermin proof, totally enclosed IP-54 protection plinth mounted Outdoor factory fabricated of 3.15 mm CRCA MS sheet of suitable size, 3 phase, 4 wire, 415 Volt AC, 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium bus bar insulated with FRP heat shrinkable sleeves of relevant colour wit necessary insulators for incoming/outgoing Circuit breakers including and mounting measuring instrument such as voltmeter, Ammeter, CT’s Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6 mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete as latest edition of IS 8623, IS 13947 & IS 2147 all as specified in technical specification mentioned in PS clause and directed. (FP No.3- OR/Hav single liv accn + Cook/Din + ancillary bldgs) |
| 55 | Serial item No. 2.029 continued…INCOMING:-MCCB 4P 250A, 36 kA, Miroprocessor based electronic release with LSIG protection - 01 No.OUTGOING:-(a) MCCB 4 P100A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 01 No (To OR/Hav sing liv accn-01)(a) MCCB 4 P 63A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 02 No (To Cook/Din hall-01, Spare-01)(b) MCCB 4 P 40A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 03 No (To Religious Inst-01, Ancillary bldg (Bus-bar)-01 & Spare-01)(c) Intelligent panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs -01set(d) LED indicating lamps with colour R,Y,B - 01 setNote: Cost of plinth for mounting of panel is deemed to be included in the quoted rate. |
| 56 | Fabrication, supply, installation, testing & commissioning of electrical cubical control panel board (PTTA Panel) factory assembled weather, Dust & Vermin proof, totally enclosed IP-54 protection plinth mounted Outdoor factory fabricated of 3.15 mm CRCA MS sheet of suitable size, 3 phase, 4 wire, 415 Volt AC, 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium bus bar insulated with FRP heat shrinkable sleeves of relevant colour wit necessary insulators for incoming/outgoing Circuit breakers including and mounting measuring instrument such as voltmeter, Ammeter, CT’s Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs including grouting of feeder pillar box 60 cm above ground level by providing 90 cm long angle iron size 50x50x6 mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete as latest edition of IS 8623, IS 13947 & IS 2147 all as specified in technical specification mentioned in PS clause and directed. (FP No.4- Existing FP No.1, 2, 3, 4 & Existing bldgs) |
| 57 | Serial item No. 2.030 continued…INCOMING:-MCCB 4 pole, 250 Amps, 36 kA, Miroprocessor based electronic release with LSIG protection - 01 NoOUTGOING:-(a) MCCB 4 P 160A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 01 No (To existing 28 bldgs, OP/T shelters )(b) MCCB 4 P 63A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 03 No (To Feeder pillar No.01 & 03, Spare-01 )(c) MCCB 4 P 40A, 16kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 05 No (To Feeder pillar No.02, 04 & 01 Spare)(d) Intelligent panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs -01set(e) LED indicating lamps with colour R,Y,B - 01 setNote: Cost of plinth for mounting of panel is deemed to be included in the quoted rate. |
| 58 | Fabrication, supply, installation, testing & commissioning of IP-66, IK10 protection, outdoor type, double door pedestal, Street light timer controlled panel of 10kW, 3 phase, 4 wire, 415 Volt AC, 50 Hz with an astronomical timer driving two three phase feeders complete with floor mounted, fabricated of 3.15 mm CRCA MS sheet of suitable size with UV-stable gasket, duly powder coated complete with locking arrangement, earthing terminals, with FRLSH control wiring including mounting Phase LED indicator lamp R-Y-B, selector switch for incoming, cables connection with suitable cable glands, lugs with all complete accessories. Complete panel unit grouting 60 cm above ground level by providing necessary angle iron support on all four corner embedded in PCC (1:2:4) using 20mm graded up to 30 cm complete with the following:-Bus-bar : 3P+1N - Aluminium busbar, 40 A mounted on 1.2 kV insulation sleeves, form-2bIncomer : 4P 32A MCCB, 16kA, adjustable thermal magnetic release - 01 No |
| 59 | Serial item No. 2.031 continued...Outgoing : (i) MCB 4P 25 A, 10kA 'C' curve - 03 Nos(ii) Power contactor - 4P, 25-32 A AC - 01 No(iii) Surge Protection device Type 2, 3P+N, Uc 275 V (N-PE)/320-350 V (L-PE), Imax≥20 kA per pole, with thermal disconnector and remote contact - 01 NoControl & automation:-(i) Astronomical timer : Legrand Astro Rex or equivalent, 2 channel, 230V AC, ≥per chan(pilot duty), lay/long programmable, DST auto, ±120 min offset - 01 No(ii) 3 position (Hand-Off-Auto) selector - 01 No(iii) Master bypass : AUTO/BYPASS selector to force panel ON irrespective of timer - 01 No(iv) Manual OFF pushbutton -02 (per outgoing feeder)(v) LED indicating lamps with colour R,Y,B - 01 setNote: (i) Clearance for 25% future feeders shall be made provisioned(ii) The cost of earthwork, panel foundation is deemed to be included in the quoted rate. |
| 60 | Supply, install, testing and commissioning of factory fabricated, outdoor type feeder pillar box of size 600x600x500mm (Bus-bar chamber) with aluminimum bus bar 200amp, 4 ways with Incoming breaker MCCB 4P 100A, 25kA, Thermal Magnetic based, adjustable range 0.7 to 1 In - 01 No, fixed over epoxy insulators and outer shell made of 3.15mm thick CRCA sheet supported with MS angle 5x50x6mm mounted on PCC 1:2:4, type B1, 90cm above ground and 45cm below ground, with front openable double door (door hinged with body at 02 places with hinges), lockable with keys and chromium plated 19mm dia fancy lock, 'U' type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415V, 50 Hz, duly powder coated with thickness not less than 100 microns provided with 'U' type gasket to make it dust & vermin proof, complete conforming to IS:8623/93, all as specifed and directed. (Near Pocket-3 (ancillary bldgs - Storage, Parking, MT store, Petrol store, MT drivers bldg)-01No, Armoury bldg & Guard room - 01No) |
| 61 | S&F Cast iron cable route indicator width 4\\" with embossing mark as HT/LT cable, shall be directly burried into the ground and having withstand capacity in all type of weather conditions and physical impact and painted with bright colour. complete as specified and directed. |
| 62 | S&F street light junction box mistral IP 65 thermoplastic enclousers with transperent door 4mm thick in 4 modulus in single row of size 52 x 202 x 117 with SP 0.5 Amp MCB and including clamp of size 25x3 mm thick of flate iron with bolt, nut etc required in mounting in steel tubular pole 9.0 mtr long complete all as specified and directed. |
| 63 | Supplying and laying of DWC HDPE pipe ISI marked of size 120mm m dia (OD-120 mm & ID-103 mm nominal) along with all accessories like socket, bend, couplers etc. conforming to IS:14930, Part Il with fitting and cutting, jointing etc. in the existing trench, complete all as specified and directed. |
| 64 | Supplying and laying of DWC HDPE pipe ISI marked of size 50mm m dia (OD-50 mm & ID-38 mm nominal) along with all accessories like socket, bend, couplers etc. conforming to IS:14930, Part Il with fitting and cutting, jointing etc. in the existing trench, complete all as specified and directed. |
| 65 | Designing, construction, supply, install, teasting and commissioning of compact & concealed designed Sewage Treatment Plant of capacity 35 kLD based on MBBR / MBR / SBR / SBT / Johkasou technology or any other technology as directed including fully automatic system (SCADA system), modular pre-constructed systems having sedimentation and seperation chamber, anaerobic contact media chamber, moving bed chamber (Aerobic), sedimentation chamber, disinfectant chamber and teritary treatment plant, including operation and maintenance for a period of 05 yeras from the date of completion of work including all consumables except power, with adequate manpower to ensure no downtime of plant and provide consistent outlet parameters, the plant shall be having least energy and operating cost and permissible noise as per standard during operation, complete as specified and as directed.Note: 25% payment of this item shall be retained from RARs / Final bill for comprehensive maintenance and shall be paid in equal installment per month or as required during the execution of comprehensive maintenance for the period of 05 years from the date of completion. |
| 66 | S&F two way bib cock chromium plated cast copper alloy wall flange quarter turn (Low flow) for 15 mm bore pipe complete all as specified and directed. |
| 67 | S&F pillar cock chromium plated cast copper alloy (Low flow) for 15 mm bore pipe complete all as specified and directed. |
| 68 | S&F sink cock chromium plated cast copper alloy with regular swinging spout (Table mounted model) (Low flow) 15 mm bore pipe complete all as specified and directed. |
| 69 | S&F Modular type 3 pin 20 A Socket with SP MCB 1 No, conforming to IS 1293 : 2005 and IS 732 : 2019complete all as specified and directed. (for AC & Geyser Point) |
| 70 | S&F Engagement light push botton with all Other accessories as specified and directed. |
| 71 | S&F LED Surface / recess mounted Downlighter having system wattage of 24W (±5%) & with a minimum system efficacy of 120 lm/W. The luminaire should have a color temperature of 3000°K / 4000°K, CRI≥80 and SDCM≤5. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing should made of pressure die-cast aluminum. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & \\"FAT\\" before dispatch as per IS 10322. The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with Technical bid. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accrediated lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accrediate lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire complete all as specified and directed.NOTE: Contractor has to provide warranty upto 5 Years. |
| 72 | Supply, Installation, testing & commissioning of LED Engagement light fitting (Red & Green), 220 V, luminaire made of CRCA housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a LEDs with colour consistency SDCM ≤ 5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed system lumens at a system efficacy of at-least 100 lumen/watt. Power consumption should not be more than 10W (± 5%). The Life of fixture (Including Driver):50000 burning Hrs. @ L70B50 Lumen maintenance @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 and THD ≤10%, suitable for an operating voltage range of 140-270V AC, Current Ripple ≤ 5%, Internal surge protection should be minimum 2 KV, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire shall be IP20 & IK02 compliant. The luminaire driver shall be of the same make / manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & \\"FAT\\" before dispatch as per IS 10322. The Contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with Sample Approval. The LED Luminaire & it's driver both should be BIS registered. Contractor shall submit the following reports before supply of material for approvals LM79 issued by NABL accrediated lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accrediate lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete all as specified and directed. |
| 73 | S&F wall fans AC single phase 230/ 240 V ,50 Hz metallic heavy body of size 400 mm sweep,and necessary connecting items with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm and making good surface complete all as specified and directed. |
| 74 | S&F load line distribution board TPN vertical 4 way, double door type, fixed on wall semi flush with incoming MCCB 4 poles and, busbars , neutral link, blanking plates and mcbs with all accessories complete all as specified and as directed |
| 75 | S&F MCB single pole , 40 A, 230 V, 50 Hz, 'C' curve conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, confirming to IS 732: 2019 complete all as specified and directed. |
| 76 | Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (LT PANEL) (SINGLE LIVING ACCN FOR NCs) (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed.The LT Panel shall comprise of the following:-[A] BUSBAR CHAMBER[i] 01 Set (3L + N) of copper busbar of rated capacity 200A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection[B] INCOMING[i]125A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No. |
| 77 | Serial item No. 2.048 continued...[ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos.[iii] LED phase indicators (Red, Yellow, Blue)- 01 Set[C] OUTGOING[i]63A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 02 Nos.[ii]40A, 415 V, Ics = 100% Icu = 10 kA, 50 Hz 4P MCB, conforming to IEC 60947-2, having trip unit, front indication LEDs (ready, overload and pre-alarm & overload)- 03 Nos.[iii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 05 Nos.[iv] LED phase indicators (Red, Yellow, Blue)- 05 Set Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 31 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender