Tender For Special Repair To Toilet/Bathroom Bldg No T-7 & P-103 At Saa Under Ge(S) Tezpur
Tender Value
28.36 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
13 days left
EMD
57000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Toilet/Bathroom Bldg No T-7 & P-103 At Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or Frames, not exc. 1.50 Sqm (without taking off shutters from the frame).complete all as specified and as directed. |
| 2 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 3 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 4 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 5 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 6 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed |
| 7 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed. |
| 8 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5mm thick in cement morter (1:4) using water proofing compound @ 3% by weight of cement and finishing the surface even and smooth without using extra cement including necessary scafolding and saftey measures complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) |
| 9 | M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of Primer (as per Manufacturer’s instructions), and applied over 2 Coats BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 10 | M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 11 | M&L preparing new plastered surfaces of wall and and applying Two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer complete all as specified and as directed. |
| 12 | M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed. |
| 13 | Supply only Integral Water Proofing compound, conforming to IS 2645 and as approved, complete all as specified and directed |
| 14 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 straps, etc. have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to Fe- 290 Gde-E-165 complete all as specified and as directed. |
| 15 | S & F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 16 | S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 17 | S&F Powder coated Aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats, snap beading etc, complete all as specified and as directed. |
| 18 | S&F powder coated aluminium window and ventilator shutters,(Thickness or powder coating not less than 50 micron). sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified and as directed |
| 19 | S&F 4 mm thick frosted/ pin headed glass in ventilator shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works complete all as specified and directed by Engr-in-Charge |
| 20 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 21 | S& F 100 mm stainless steel Butt hinges with with SS Screw complete all as specified and as directed. |
| 22 | S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and as directed. |
| 23 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 24 | M & L for mass concrete filling using PCC ( 1:5:10) type E2 in sunken floor using WPC @ 3% of cement used complete all as specified and as directed.(Note: WPC Shall be paid separately) |
| 25 | M & L for average 25 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded aggregate with integral wpc complies with in sunken floor and bathroom area complete all as specified and as directed.( Note: WPC shall be paid seprately) |
| 26 | S & F APP base polymeric membrane minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on bitumen 85/25 grade over a coat of primer surface by forced application complete all as specified and as directed |
| 27 | M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 28 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 29 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 30 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 31 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 32 | S&F vitrified Glazed tiles 450 x 300 mm x 7 to 8 mm or 600x300x8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screeding in Cement mortar 1:3 complete all as specified and as directed. |
| 33 | S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of old GI Pipe complete all as specified and as directed. |
| 34 | S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of old GI pipe complete all as specified and as directed. |
| 35 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 36 | S & F in repair only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | S & F,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 38 | S&F in repair 15mm bore dia brass choromium plated wall mixtuer for mixing hot & cold water screwed down for iron pipe and fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.. |
| 39 | S & F, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. complete all as specified and directed. |
| 40 | S & F, waste coupling CP 32/40 mm dia for glazed ware basins/ Sink etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed. |
| 41 | M & L, as in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement complete all as specified and directed |
| 42 | S & F, as in repairs, sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 43 | S & F, as in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 44 | S & F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed. |
| 45 | S & F as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 47 | Dismantling and breaking up PVC/iron drain or vertical waster pipes of any dia jointed in CM and taking out of trenches. complete all as specified and as directed. |
| 48 | S & F, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 49 | S & F, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor complete all as specified and directed. |
| 50 | S&F for PVC (SWR) with access door bend 110mm dia.complete all as specified and as directed. |
| 51 | S&F for PVC (SWR) with access door bend 75 mm dia.complete all as specified and as directed. |
| 52 | S&F in repair PVC(SWR) junction single with access door (single 'T') equal or unequal 75 mm bore.complete all as specified and as directed. |
| 53 | S&F in repair PVC (SWR) junction single access door (single 'T') equal or unequal 110mm bore.complete all as specified and as directed. |
| 54 | S&F in repair PVC (SWR) junction double with access door , (double T), equal or unequal 110mm bore.complete all as specified and as directed. |
| 55 | S & F, PVC cowls 110 mm bore complete all as specified and as directed. |
| 56 | S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed. |
| 57 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 58 | M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent complete all as specified and as directed. |
| 59 | S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed. |
| 60 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 61 | S& F in repair of Towel Rail of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed. |
| 62 | S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws.complete all as specified and as directed. |
| 63 | S & F, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern ) but including seat cover white closed type and flush pipe complete all as specified and directed |
| 64 | S & F, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (padestan pattern) complete all as specified and directed. |
| 65 | Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. |
| 66 | S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole100/75mm dia complete all as specified and directed. |
| 67 | Supply and fix, as in repair, Shower rose 40 mm dia with neck of 450/600mm long standard of Chromium plated any colour screwed, for iron pipe 15mm bore complete all as specified and as directed. |
| 68 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 69 | Demolition of RCC of any description specifically provided for.complete all as specified and as directed. |
| 70 | M & L for 75mm thick Plain Cement concrete 1:3:6 type C2 using 40mm gradded agg as in sub-base. complete all as specified and as directed. |
| 71 | Dismantaling of timber framed scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed. |
| 72 | Taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 73 | S & F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed |
| 74 | Taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 75 | S&F 20mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors incl conceiling/ clamping etc including all fittings and taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed |
| 76 | S&F 15mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete towalls, ceilings or in floors incl conceiling/ clamping etc including all fittings and taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed. |
| 77 | M&L applying two coats of distempering with oil emulsion, over providing and applying plaster of paris putty of 1 mm thickness over new plastered surface to prepare the surface even and smooth. complete all as specified and as directed. |
| 78 | M & L for preparation of new plastered surfaces of walls and applying two coats of weather shield exterior emulsion paint over a coat of white primerover a coat of thick wall care putty complete all as specified and directed |
| 79 | M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed |
| 80 | M & L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:4 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and directed. |
| 81 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screed bed in Cement mortar 1:4 complete all as specified and as directed. |
| 82 | S/F 4mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified and as directed. |
| 83 | S/F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed. |
| 84 | S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position complete all as specified and as directed. |
| 85 | S & F 75mm size MS butt hinges, medium weight, cold rolled. complete all as specified and as directed. |
| 86 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , steel tubes including distance pieces, cleats etc.complete all as specified and as directed. |
| 87 | S&F Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed. |
| 88 | Preparation of new steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over a coat of red oxide. complete all as specified and as directed. |
| 89 | Dismantling of steel/galvised sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and as directed. |
| 90 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts complete all as specified and directed |
| 91 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts complete all as specified and directed |
| 92 | M &L PCC (1:3:6) type C-2 as in drain/surface channel and similar work complete all as specified and as directed. |
| 93 | S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 680 x 470 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 94 | S&F in repairs 15 mm bore stop/angle valve fency type with capstan heads, chromium plated screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions.complete all as specified and as directed. |
| 95 | S&F in repairs 15mm bore 125mm size type brass chromium plated shower rose, complete all as specified and directed |
| 96 | S & F in repairs vitreous china white wash hand basin glat back of size 550 x 400 mm including brackets CP waste pipe and waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete all as specified and as directed. |
| 97 | S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. |
| 98 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. |
| 99 | Taking down main switches and DBs of any type and make including wooden board / junction box. complete all as specified and as directed. |
| 100 | M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 101 | All as per item No. 100 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 102 | All as per item No. 100 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 103 | All as per item No. 100 here - in - before but for 5 Amps socket point on the same board controlled by one switch. complete all as specified and as directed. |
| 104 | M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed. |
| 105 | M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type,complete all as specified and directed. |
| 106 | M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal complete all as specified and directed. |
| 107 | S&F ceiling rose surface backelite three terminals. complete all as specified and as directed. |
| 108 | Supply and fix LED tube light fitting of 18 W (4 Ft) 240 V Wall mounted LED batten aluminium houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. complete all as specified and as directed. |
| 109 | All as item no 108 above but LED batten 9 watt 2 ft long complete all as specified and as directed. |
| 110 | Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed. |
| 111 | M&L complete for metal body exhaust fan of size 300 mm sweep, single phase,230 volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements. complete all as specified and as directed. |
| 112 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed |
| 113 | S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed |
| 114 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed |
| 115 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 2 core. complete all as specified and as directed.Note: 1. Excavation and earth work will be measured and paid seperately. |
| 116 | Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed. |
| 117 | M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 118 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note : punned thickness will only be measured for payment purpose. |
| 119 | Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed. |
| 120 | Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engr-in-Charge. |
| 121 | Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed |
| 122 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 123 | Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed. |
| 124 | Taking up GI water tubing 25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as specified and as directed. |
| 125 | Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. |
| 126 | Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 127 | Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 128 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender