Tender For General-Thasrak Lis-Very Urgent Rewinding Work To 50 Hp Slip Ring Motor At Thasrak Lis-General Electrical Work-.
Tender Value
1.66 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
4160
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Thasrak Lis-Very Urgent Rewinding Work To 50 Hp Slip Ring Motor At Thasrak Lis-General Electrical Work-.
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding work |
| 2 | OD124461/2026-2027:Dismantling the 31-60 HP motor into stator and rotor, cleaning the windings attending minorrepairs, re taping the coils if necessary, varnishing the coils with best quality insulation varnish,cleaning and greasing the bearings with good quality grease, heating the windings,reassembling, including scrapping, cleaning and painting with enamel paint. |
| 3 | OD266287/2025-2026:Refitting 31-60 HP motor, starter and other electrical accessories,( Accessories when necessary) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TPswitch etc in position giving connections checking correct alignment and trial run on full load |
| 4 | OD124460/2026-2027:Dismantling the 31-60 HP starters by parts draining out the oil, cleaning the tank, terminal contacts, cutting, leveling and polishing the contacts, cleaning contacts wherever necessary, checking the tripping mechanism, replacing the damaged wires, attending minor repairs, cleaning the oil,(in case of oil starters ), refitting, resetting and making the starter in good working condition. |
| 5 | OD124464/2026-2027:Dismantling the 1-3 HP motor into stator and rotor, cleaning the windings attending minor repairs, re taping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with good quality grease, heating the windings, reassembling, including scrapping, cleaning and painting with enamel paint. |
| 6 | OD124466/2026-2027:Refitting upto 1-3 HP motor/vacuum motor pump set, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load |
| 7 | OD124467/2026-2027:Dismantling the 1- 5 HP airbreak starters by parts ,cleaningthe contacts wherever necessary,checking the trippingmechanism, replacing thedamaged wires, attending minorrepairs, refitting, resetting andmaking the starter in goodworking condition |
| 8 | OD304390/2025-2026:Replacing old bearing and supply new bearing bearing no NU314 SKF/FAG OR equivalent |
| 9 | OD304401/2025-2026:Replacing old bearing and supply new bearing no 6311SKF/FAG or equivalent |
| 10 | OD124463/2026-2027:Dismantling the 31-60 HPpump of motor pump set takingout the impeller shaft assembly,detaching impeller shaftassembly, Reconditioning theworn out shaft by welding,mettaling, cutting,grinding ,anddynamically balancing etc.refitting the same in pump |
| 11 | OD124469/2026-2027:Replacing the existing brush holder with new one |
| 12 | OD124470/2026-2027:Replacing the slip ring unit of induction motor pump set up to 60/75 HP with new one |
| 13 | OD124729/2026-2027:Charges for rewinding the burnt rotor/stator - separate motor in to stator and rotor, dismantling the damaged rotor/stator winding from the rotor/stator slots, cleaning the slots neatly, insulating the slots with correct class of insulating paper, winding the rotor/stator with good quality correct gauge of super enamelled copper winding wires, closing the rotor/stator slots with fibre wedges, putting proper inter layer insulation, connecting the coil end connection, providing new stator/rotor lead wire, steel binding the overhang with proper insulation at both ends, heating the coils and varnishing with good quality insulation varnish, keep it for drying, reassembling and test running. |
| 14 | OD266282/2025-2026:Conveyance charge of 20-120 Hp motor/pump/panel board/starter board/ etc by Tata ace from pump house to workshop and bring back to pump house.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender