Tender For Special Repair To Bldg No E-281/T-57 And E-282/T-58 Single Nursing Offrs Living Accn At Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Sep 2026
4 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No E-281/T-57 And E-282/T-58 Single Nursing Offrs Living Accn At Roorkee
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Sep-2026 | Revised BOQ | BOQ | 30-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor & paving, n. exc 15 cm thick (below or above GL), unreinforced complete all as specified and directed. |
| 2 | M&L 40mm thick for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor. finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 75mm thick cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including necessary expansion joints, filled solidly with a hot mixture of blown grade bitumen and sand 1:1 by weight complete all as specified and directed. |
| 4 | M&L 25mm thick Cement concrete type B-0, (1:2:4) (12.5mm graded aggregate) as in sub floor and levelling coarse etc complete all as specified and directed. |
| 5 | Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed |
| 6 | M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab,landing or in any position complete all as specified and directed. |
| 7 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and Old unserviceable of any height complete all as specified and directed. |
| 8 | M&L for rough finished flat form work to soffits of suspended slabs such as roof slab, floor slabs, landings and similar wrok not exc 200 mm horizontal thickness all as specified and directed. |
| 9 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removing debris out side MoD land complete all as specified and directed. |
| 10 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 11 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc arrangments of any height complete all as directed. |
| 12 | M&L rendering 15 mm thick in cement mortar 1:6 of brick work/concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement including all necessary scaffolding complete all as directed. |
| 13 | M&L rendering 15mm thick rendering in cement mortar 1:4 on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement (WPC will be measured and paid separatly) including including all necessary scaffolding arrangments of any height complete all as specified and directed. |
| 14 | Supply only liquid water proofing compound complete all as specified and directed. |
| 15 | Preparation of new plastered surface or old treated surface of wall by applying 1mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed. |
| 16 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint surface of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and applying waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc by skilled labour. |
| 17 | M&L for preparation of old wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) including scafoldings of any hieght complete all as specified and directed. |
| 18 | M&L for preparation of new wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght complete all as specified and directed. |
| 19 | M&L in repair second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght complete all as specified and directed. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour / length having tensile strength of 550 MPA, AZ-150 as in roof coverings/cladding with self tapping screws as directed by manufacturer complete all as specified and directed. |
| 21 | M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to Fe 410 W (Gde E 250) for all as specified and directed |
| 22 | M&L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 23 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MoD land complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L for vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8 to 10mm thick, (square/ rectangular) polished, area of each tile exceeding 0.42 Sqm and not exceeding 1.00 Sqm, in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, including filling of grooves/joints with approved coloured epoxy grout, over and including 15mm thick screed bedding/plaster in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and not exc 1.00 Sqm, in vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick plaster in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for non skid ceramic tiles, joint free, conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles exc 0.16 but n exc 0.36 sqm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 27 | M&L for non skid ceramic tiles, joint free, conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles exc 0.16 but n exc 0.36 sqm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender