Tender For Welcome Maintenance To Officers Qtr At Mg Enclave & Haldighati Line In Zone-Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
6 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance To Officers Qtr At Mg Enclave & Haldighati Line In Zone-Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cutting holes in stone wall not exc half brick built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 2 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed 15 mm thick in CM 1:6 complete all as specified & directed. |
| 3 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face are covered with decorative face veneer with lipping / frame to match including preparation of surface with filler coat and one coat primer with two or more coat french polish till shining to the surface complete all as specified and directed. |
| 4 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 5 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 6 | M&L second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 7 | S&F second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 8 | S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 9 | Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed. |
| 10 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 11 | S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm wood grain printed PVC sheet used reinforced with MS square tube & edges will be painted to match with printed sheet, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed |
| 12 | S&F Factory made Solid PVC Moulded door shutter with Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded Prelam PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 13 | M&L in repair for 18 mm thick WPC (Wood Polymer Composite) panel with suitable pins, screws and adhessive in cabinets body, shutters and shelves etc. complete all as specified and directed. |
| 14 | S&F 20 mm dia stainless steel, silver & chrome finish, fancy type, anti-rust curtain rod with curtain bracket , finials fixed by screw in wall complete as all specified and directed. |
| 15 | S&F 8 mm thick (Both side white lamination solid PVC board with cement solvent adhesive for in back of kitchen cabinet/partition of cupboard etc complete all as specified and directed. |
| 16 | S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 150 mm long complete all as specified and directed. |
| 17 | S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 18 | S&F brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 300 mm length of bolt complete all as specified and directed. |
| 19 | S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed. |
| 20 | S&F butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed. |
| 21 | S&F extruded brass handles, fabricated type polished of 100 mm size complete all as specified and directed. |
| 22 | S&F aluminium handles cast type anodised of 125 mm size complete all as specified and directed. |
| 23 | S&F in repair extruded aluminium alloy handles fabricated type anodised of 125 mm size complete all as specified and directed. |
| 24 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 25 | S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed. |
| 26 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 27 | M&L for roller blind curtain (semi blackout) for windows roll-up shades light filtering sun and UV protection polyester curtains with plastic cord/chain, brackets fixed with screws complete all as specified and directed. |
| 28 | M&L for auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed. |
| 29 | S&F mild steel framed work for windows grills such as grills, ladders, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / window and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 30 | S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 31 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 32 | M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 33 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Glass and other filling material in panels shall be measured and paid seperately. |
| 34 | S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note : Glass and other filling material in panels shall be measured and paid seperately. |
| 35 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 36 | M&L for machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing on treads of step and landing of stair including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 37 | M&L for glazed digital ceramic coloured tiles in vertical surface 600x 1200x 10 mm thick, (digital tile ) as dado etc laid in concept /pattern using highlighters set and jointed in neat cement adhessive and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and direct |
| 38 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed. |
| 39 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for vitrified Ceramic tiles light shade cut out of 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 41 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 43 | M&L for applying smartcare Hydroloc damp proof in two coats over old or newly plastered surfaces including preparation of surfaces for treating dampness and efflorescence as per manufacturer's instruction complete all as specified and as directed. |
| 44 | M&L for complete removal of existing treatment and preparation of old surface of ceiling of any description and and applying two coats of Plastic Emulsion Paint (Luxury /Royal) on ceiling white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed. |
| 45 | M&L for complete removal of existing treatment by mechanical sanding/scrapping using an electrically operated wall sander fitted with an integral dust extraction/vacuum system, variable speed not less than 1500 RPM, using suitable abrasive standing pad (80 grit or as recommended by the manufacturer depending upon the condition of existing surface) to remove loose paint, chalking and other surface contaminants and to prepare the surface for repainting and apply water proof cement based wall putty of approved make in an average thickness of 1 mm to obtain an even and smooth surface, allowing proper drying. Thereafter applying two coat of acrylic emulsion exterior grade weather proof paint by airless spray application using a high-pressure airless spray machine having a maximum working pressure of not less then 3300 PSI, complete with suitable spray gun, hose and accessories capable of achieving a uniform finish, including difficult to reach areas, all in accordance with manufacturer recommendation and directed and including all necessary surface preparation, protection of adjacent surface, masking, scaffolding, staging, ladders, trestles, cleaning of splashes from floor, doors, windows, furniture etc for building upto three storeys complete all as specified and directed by Engineer-in-Charge.Note :-(i) Mechanical sanding shall be carried out using a wall sander fitted with an effective dust extraction system to minimise dust pollution.(ii) The airless spray equipment shall be of a reputed manufacturer and suitable for application acrylic emulsion exterior grade weather proof paint as recommended by the paint manufacturer.(iii) Measurement shall be taken on the finished surface area actually treated. |
| 46 | M&L for preparation of old (plastered or unplastered) surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 47 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description and applying two coats of oil bound distemper (OBD) over a coat of alkali-resistant priming paint over and including 1 mm thick wall putty all as specified and directed. |
| 48 | M&L for preparation of old decorated surfaces of ceiling by complete removal of existing treatment and applying two coat of oil bound distemper (OBD) over a coat of alkali resisting priming paint over and including 1mm thick wall care putty complete all as specified and directed. |
| 49 | M&L for preparation of old plastered surfaces of walls by complete removal and finishing of walls with textured paint of required shade of two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer (applied @ 2.20kg/10 sqm) complete all as specified and directed. |
| 50 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with neoprene rubber beading in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 51 | S&F 10 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes fixing with SS Bracket and channel, allied fittings & hand rail sliding as required complete all as specified and directed. |
| 52 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 53 | M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 54 | M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler with two or more coats till shining complete all as specified and directed. |
| 55 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 56 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 57 | S&F of CPVC pipes of 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 58 | S&F of CPVC pipes of 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 59 | S&F in repair brass chromium plated overhead shower rose of 250 X 250 mm size, square / round shape, with revolving / swivel joint complete all as specified and directed. |
| 60 | S&F in repair health faucet (hand shower) chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube with non return valve and wall hook including making connections and fixed in position complete all as specified and directed.Make : Kohler / Grohe / Roca / Cera |
| 61 | S&F in repair bib taps 2-in-1 cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type of 15 mm bore dia of pipe complete all as specified and directed. |
| 62 | S&F in repair wash hand basin vitreous china white of size 800x475 mm with cabinet (Vanity) and including all fitting bottle trap complete all as specified and as directed.Make : Cera , Somany , Parryware etc |
| 63 | Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed. |
| 64 | S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed |
| 65 | Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 66 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 67 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. |
| 68 | S&F in repair for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 69 | S&F in repair ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 15 mm bore of pipe complete all as specified and directed. |
| 70 | S&F in repair snow white colour vitreous china, rimless Wall Hung WC with UF Soft Close Seat Cover, Hinges, Accessories Set, Single Piece Slim concealed cistern with floor mounten frame, installation kit with twin flush control plate including fixing as per manufacturer instructions complete all as specified and as directed. Make : Jaquar CAT Part No LAS-WHT-91953BIUFSM / Roca CAT Part No RS34668900C / Kohler CAT Part No SKU: K-20217IN-S-0 or equivalent make as approved by GE. |
| 71 | S&F in repair for single piece WC With UF Soft Close Slim Seat Cover, Hinges, Flush Cistern Fitting, fixing accessories S / P Trap as per manufacturer instructions complete all as specified and as directed. Make : Hindware Cat Part No. 92565 (S-22) / Cera Cat Part No. S1013123 or equivalent as approved by GE. |
| 72 | M&L for table top wash basins, of size 530 x 420 x 140 mm Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. |
| 73 | S&F in repair chromium plated soap dish holder complete all as specified and directed. |
| 74 | S&F Stainless Steel Towel Rack 600mm Long complete all as specified and directed. Make:- Grohe CAT part No. 40512001 / Kohler CAT Part No. K-17529T-CP or equivalent as approved by GE. |
| 75 | S&F in repair angle cock stop valve, fancy type chromium plated cast copper alloy, for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 76 | S&F in repair for 15mm bore, 3-in-1 wall mixer, brass CP, fancy type, for mixing hot & cold water, having connection for overhead and hand shower and including screwed down for iron pipe or for union along with spout complete all as specified and directed.Make:- Grohe Cat Part No. 23198000 / Kohler cat Part No. 99460IN-4-CP or equivalent as approved by GE. |
| 77 | M&L in repair for Tumbler Holder for bathroom complete all as specified and directed.Make: Kohler Cat part No - B0835LKBZQ / Roca Cat part No - RA817021CN0 or equivalent make as approved by GE. |
| 78 | S&F in repair float corner glass (set of three) shelve 8 mm thick 300 mm radius with bracket complete all as specified and directed. |
| 79 | S&F in repair for 15mm bore dia of pipe brass CP, wash hand basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.Make : Kohler / Grohe / Roca / Cera. |
| 80 | S&F in repair stranded conductor, 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of 10 sqmm flat or circular complete all as specified and directed. |
| 81 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.Note :- |
| 82 | M&L in repair for sub main wiring complete with 4 Runs of 6 Sqmm single core PVC insulated unsheathed FRLSH copper cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including concealed PVC rigid conduit / casing capping not less than 25mm and conduit accessories fixed on surface/wall celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLSH cable with multi-stranded copper conductor as earth continuity complete all as specified and directed. Note : 04 Run of 06 Sqmm copper wire copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit. |
| 83 | S&F in repair modular 20 amp AC box with 20 Amp single pole MCB and 16 Amp 3/2 pin combined 2 module socket and 16 Amp plug top complete all as specified and directed. |
| 84 | S&F in repair LED wall mounted bracket light fitting, decorative type including LED Bulb (10 to 14W, 230V) connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.Make : Philips Cat Part No. - 30575 , Havells Cat Part No. - LHFOECE1TZ1B014 or equivalent make as approved by GE. |
| 85 | S&F in repair LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type warm white/natural white with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 86 | S&F in repair bed side 3/5 W, 230V AC, warm white / natural white LED lamp, decorative type including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. |
| 87 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 88 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender