Tender For Periodical Services Alongwith Connected B/R Items In Otm Accn In H Wing, G Wing, T Wing, Mh Area And Csq Area Under Age B/R-Ii Ge Babina
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services Alongwith Connected B/R Items In Otm Accn In H Wing, G Wing, T Wing, Mh Area And Csq Area Under Age B/R-Ii Ge Babina
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. all as directed by Engineer in Charge. |
| 2 | M&L for 15mm thick rendering in CM (1:6) on brick/ solid block masonry wall/ concrete surfaces finished even and smooth without using extra cement all as directed by Engineer in Charge. |
| 3 | M & L for 10 mm thick rendering in cement mortar (1:4) mixed with water proofing compound, on brick work / RCC/ roof/ chajja or concrete /brick surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed.(Note:- WPC will measured sepretlly) |
| 4 | Supply only water proofing compound complete all as specified and as directed. |
| 5 | M & L 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling complete all as specified and a directed. |
| 6 | M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note: All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs |
| 7 | All as per item No.6 above but on ceiling in lieu of walls complete all as spedified and as directed. |
| 8 | M & L for preparing old deorated plastered or un-plaster surfaces of wall, pilaster, cornices etc by brooming down or steel wire brushing, scrapping down smoke root moulds, moss and efforehance salt and trading oil and greasy spot and applying one coat oil bound emulsion distemper on wall complete all as specifed and as directed. |
| 9 | M & L for preparation of old decorated surfacees of wall by washing, rubbing down and stoping of painted surfaces and applying one coat of cement base paint complete all as directed |
| 10 | Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). |
| 11 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as directed by Engineer in Charge. |
| 12 | M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour and appying two coat of oil bound distemper inccluding prepration of surface complete all as specified and as directed. |
| 13 | M & L for complete removal of existing treatment from wall and coping and appying two coat of cement base paint over a coat of JK/Birla wall care putty including prepration of surface complete all as specified and as directed. |
| 14 | M & L for complete removal of existing treatment on old surface of wall by scrubing with hard wire brush, washing down with water and applying JK/Birla wall care putty, to receive smooth survace and applying two coats of weather proof exterior acrylic emulsion paint to DULUX Weaher Shield Max of APEX ULTRA from ASIAN paint or equvalent in NEROLAC/ SHALIMAR/JOHNSON & NICHOLOSON/ BERGER/CI India as approved by GE over one coat of primer from the same manufacturer complete all as speified and directed. |
| 15 | M & L Preparing newly plastered surfaces of walls and applying three coats of white wash all as directed by Engineer in Charge. |
| 16 | M&L Newly plastered surface and applying two coat of oil bound distemper over one coat of chalk whitiing on plastered surfaces on walls all as specified and directed. |
| 17 | Preparing new plastered surfaces and applying Two coats of cement base paint over one coat of chalk whitiing on plastered surfaces on walls complete all as specified and directed by Engineer in Charge. |
| 18 | M & L Preparing newly plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed by Engineer in Charge. |
| 19 | S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. |
| 20 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete complete all as specified and directed by Engineer in Charge. |
| 21 | M&L for a coat of JK/Birla wall care putty 1 mm (average) thick including preparation of surface complete all as specified and as directed. |
| 22 | M&L preparation of old decorated surfaces and writting letters n.exc 30cm high (with black colour) including back ground n.exc 450mm dia (with yellow colour) complete all as specified and directed |
| 23 | Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed |
| 24 | M&L for P.C.C (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in coping and on roof/benching over chajja etc complete all as specified and as directed. |
| 25 | Repair/Re-adjusting of wooden window n. exc. 1.50 Sqm with all necessary hardware fittings like screw, hinges,tower bolt,handle etc complete all as specified and as directed. |
| 26 | Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm/75mm bore as directed |
| 27 | S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls / laid in floor complete all as specified and as directed by engineer in charge . |
| 28 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors / wall complete all as specified and directed |
| 29 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 30 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed |
| 31 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 33 | M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed |
| 34 | M&L glazed ceramic colour tiles 300mm x 200mm x 7mm / 300x600 mm 6/7 mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed. |
| 35 | S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete complete all as specified and directed by Engineer in Charge. |
| 36 | S&F in repair 15 mm bore stop valve/angle cock cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed. |
| 37 | S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 38 | S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 39 | S & F PVC Waste pipe for fixing in WHB and Sink 32/40 mm dia 600 mm long complete all as specified |
| 40 | M and L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry admixed with acrylic bonding compound SBR latex ratio ( 1 SBR Latex : 2 Cement : 1/2 water ) of approved make and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/ formwork etc upto double storey height complete all as specified and directed by engineer in charge. |
| 41 | Note for Periodical Services items as above: The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender