Tender For Addition / Alteration And Special Repairs To Md Accn Block No.B-16 To B-19 (40 Qtrs), C-23 To C-15 (48 Qtrs) And D-09 To D-11 (36 Qtrs) In Drdo Township, Phase-I, Cv Raman Nagar Bangalore
Tender Value
8.95 Crore
Estimated cost
Bid Submission
07 Oct 2026
27 days left
EMD
7.72 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration And Special Repairs To Md Accn Block No.B-16 To B-19 (40 Qtrs), C-23 To C-15 (48 Qtrs) And D-09 To D-11 (36 Qtrs) In Drdo Township, Phase-I, Cv Raman Nagar Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each and removing to store complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exc 4sqm each and removing to store complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and removing to store complete all as specified and directed. |
| 4 | Taking down Shutters of any description n.exc 1 sq. m each and removing to store complete all as specified and directed. |
| 5 | Taking down boards of any description and any size as in shelves complete all as specified and directed. |
| 6 | Taking down, easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws etc, and refixing in the same opening after laying of tiles, shutters of any description exceeding 1.0 sq.m but not exceeding 2.0 sq.m each, complete all as specified and directed. |
| 7 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and directed. |
| 8 | S&F to frame factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame included/sealed to the stile, rails with suitable PVC sheet heading and jointed to gether with solvent colour complete all as specified and as directed. |
| 9 | Pressed steel frames of size 105 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 10 | Pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges, lock strike plate, Single action spring hinges etc complete all as specified and directed. |
| 11 | PCC 1:3:6 type C0 using 12.5mm graded stone aggregated as in filling the chowkats / frames complete all as specified and directed. |
| 12 | 35 mm thick plain, framed, panelled factory made shutters with IInd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial vaneer on both faces. The size of rail and style as per IS-1003 Part-I complete all as specified and directed. |
| 13 | 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels (with BWP Marine grade), both face is covered with decorative polished face veneer with lipping / frame to match complete all as specified and directed.Note: The rates for flush shutters include for the provision of suitable blocks for fixing mortice locks, latches, or other fittings. |
| 14 | 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars) edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members of shutters complete all as specified and directed. |
| 15 | 18/19 Veneered decorative plywood, grade 1 (with BWP Marine grade) with decorative face veneers on one side and other side balancing white face; fixed with screws to timber frame work, shelves of cupboard & door etc incl providing PVC lipping at the exposed edges,complete all as specified and directed. |
| 16 | All as per Sl item No. 15 above but 12mm thick. |
| 17 | Fancy type stainless steel handle of size 100 mm long complete all as specified and directed. |
| 18 | Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete all as specified and as directed. |
| 19 | Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised with width of flaps (when open) 40 mm complete all as specified and directed. |
| 20 | S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed. |
| 21 | S&F in repair Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed. |
| 22 | S&F Aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and directed. |
| 23 | S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 24 | S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 25 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and directed. |
| 26 | S& F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and directed. |
| 27 | 100 mm size hasp and staple, safety type, aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 28 | Door stopper of rubber and aluminium alloy body, 150 mm size fixed in repairs complete all as specified and directed. |
| 29 | Door stopper of rubber and aluminium alloy body, 150 mm size complete all as specified and directed. |
| 30 | Mortice lock, (six lever) vertical type mild steel of 100mm size including handle, screwing all as specified and directed. |
| 31 | Magic eye fixed to wooden door shutter complete all as specified and directed. |
| 32 | Providing and fixing IS : 12817 marked stainless steel butt hinges 100x60x2.50 mm with stainless steel screws etc. complete all as specified and directed. |
| 33 | Mild steel butt hinges medium weight cold rolled of size 100 mm including necessary welding fixed in repairs complete all as specified and directed. |
| 34 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender