Tender For Repair/Maint Of Joinery Wks Alongwith Connected B/R Items In Md/Otm Accn In Sm Enclave & Csq Area Under Age B/R-Ii, Ge Babina.
Tender Value
29.96 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
20 days left
EMD
59920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Joinery Wks Alongwith Connected B/R Items In Md/Otm Accn In Sm Enclave & Csq Area Under Age B/R-Ii, Ge Babina.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) all as directed by Engineer in Charge. |
| 2 | All as per item no. 1 above but exc 1.5sqm and n exc 4sqm each - do -. |
| 3 | Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each all as directed by Engineer in Charge. |
| 4 | All as per item no. 2 above but n. exc 1 sqm |
| 5 | Taking down and refixing in the same opening of aluminium door/window wooden shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge. |
| 6 | M&L for PCC (1:2:4) Type B1 (using 20mm graded aggregate) in wall, boundary pillars and post or similar work for hold fast in door and windows etc all as specified and as directed. . |
| 7 | Supply and fix for 30 mm thick flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces, BWP, complete all as specified. |
| 8 | S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters (locally made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge. |
| 9 | S&F 30mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I para 8.24 (b). |
| 10 | S&F of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, ISI marked complete all as specified and directed. |
| 11 | S&F of Aluminium anodised barrel tower bolts 100 mm long of extruded section, complete all as specified and directed. |
| 12 | S&F of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed. |
| 13 | S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC (1:3:6) type C1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 14 | S&F 105 mm x 60 mm size Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC (1:3:6) type C1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 15 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing. |
| 16 | M&L for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions. |
| 17 | M&L for 2nd class hard wood for plain, solid, straight chowkats and frames wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and directed. |
| 18 | S&F in repair of door seal 25 to 30 mm wide fixed to wooden doors with screws, complete all as specified and directed. |
| 19 | S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge. |
| 20 | S&F in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge. |
| 21 | M&L for 2nd class hard wood Beads, straight (any size) for glazed or gauzed joinery,renewed, including mitres etc.and removing old beads from site complete complete all as specified and directed. |
| 22 | S&F 100mm size mild steel butt hinges medium weight, cold rolled , ISI marked complete all as specified and as directed by Engr-in-Charge. |
| 23 | S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed by Engr-in-Charge. |
| 24 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 25 | S&F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed by the Engr-in-Charge. |
| 26 | S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 27 | S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 28 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge. |
| 29 | S&F in repair steel windows 'Z' section with side hung shutters including box type hinges with steel handle and steel peg stay, with glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable window complete all as specified and as directed. |
| 30 | S&F in repair steel windows 'Z' section with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable window complete all as specified and as directed. |
| 31 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 32 | Hacking out old broken glass (any thickness,any quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed. |
| 33 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n.exe 0.50 Sqm in each pane complete all as specified and as directed. |
| 34 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 35 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. |
| 36 | M&L applying one coat of synthetic enamel paint including preparation of old wood or wood based surfaces of any description over 10 cm width or girth and complete all as specified and as directed. |
| 37 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge. |
| 38 | S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge. |
| 39 | S&F Aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed. |
| 40 | M&L Anodised aluminium frame straight for Doors/ Windows/Ventilators/Partitions using aluminium section of minimum size 100 x 44mm x1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed. |
| 41 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, nodised aluminum snap beading screws etc. including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed. |
| 42 | S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work to timber frame work or aluminium saction complete all as specified and as directed. |
| 43 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 44 | M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium glazed window shutters (side hung type) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed. |
| 45 | S &F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 46 | S&F 3.50 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 47 | S&F 3.50 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 48 | M&L , 2nd class hard wood , Plain fillets square, rectangular or triangular in section, exe 6 & n.exe 13 Sq.cm, bull nosed, splayed, chamfered or rounded on one edge, secured with nails or brads, refixed in repair in old position complete all as specified and directed. |
| 49 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 50 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, polishing for cupboard shutter complete all as specified & directed. |
| 51 | S&F in repair continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electro galvanised all a specified and directed by Engineer in Charge. |
| 52 | S & F 100mm aluminum Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws Complete all as specified and as directed. |
| 53 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 54 | Dismantling Wall panelling and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 55 | S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as directed. |
| 56 | S&F 4 mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed. |
| 57 | S&F 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod and making good complete all as specified and directed. |
| 58 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed. |
| 59 | M&L for 1st quality glazed coloured ceramic tiles 300 x 450 x7-8mm /300 x 600 x 7-8 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and including 10mm thick rendering in cement mortar 1:4 etc all as specified and directed. |
| 60 | M&L for 1st quality Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and as directed. |
| 61 | M&L for 1st quality Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , in vertical surfaces such as skirtings/dados or risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 etc complete complete all as specified and as directed. |
| 62 | M&L 1st quality non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm over 15mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 63 | M&L for 1st quality ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed area of each tiles exceeding 0.11 sqm but n. exc 0.18 sqm over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed. |
| 64 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 65 | M&L for rounding, chamfer and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 66 | Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed. |
| 67 | Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed. |
| 68 | S&F of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, complete all as specified and directed. Note : Including welding work as required for fixing in steel chowkhats. |
| 69 | S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed. |
| 70 | S&F in repair PVC bathroom cabinet with mirror of size 432 mm x311mm complete all as specified and as directed. |
| 71 | S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc.complete all as specified and as directed. |
| 72 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 73 | S&F in repair stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1.0 mm thick stainless steel sheet complete all as specified and directed. |
| 74 | Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 75 | M&L, brick work with sub class ‘B’ bricks (old size), straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed |
| 76 | M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge. |
| 77 | M&L Newly plastered surface and applying two coat of oil bound distemper and one coat of white putty on walls all as specified and directed. |
| 78 | Cutting holes in brick walls in cement mortar for walls inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender