Tender For Repairs To Joinery, Pluming Incl Misc B/R Items At Sports Complex, Smc, Living In Billets And Map Bldg Area At Af-I Under Ge (Af) Jamnagar No.2
Tender Value
40 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Pluming Incl Misc B/R Items At Sports Complex, Smc, Living In Billets And Map Bldg Area At Af-I Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairs to CP/Brass bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer including refixing and replacement of CP face along with removal of airlock/blockage in pipeline to ensure proper flow of water etc all as including making good the existing surface etc all as specified and dircted by Engg-in-charge to stop the leakage ang making the same functional . |
| 2 | M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of brass spindle heavy quality and washer, all as specified and directed. |
| 3 | S&F in repair 15 mm size Angle cock, cast copper alloy, chromium plated, fancy type with capstan head, concealed type, screwed down, screwed both end for iron pipes complete |
| 4 | S&F in repair 15 mm size bib cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.Make:- plumber cat no. EC-0202, jaquar , kohler |
| 5 | S& F in repairs brass chromium plated shower rose 75 mm size with arms 15 mm inlet complete. |
| 6 | S & F in repairs 15 mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified. |
| 7 | S&F in repair white vitreous china wash hand basin of size 580 x 440 mm, fixed over & including MS brackets comprising of the following items :-(a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete.(b) PVC waste pipe 32 mm dia 750 mm long complete. |
| 8 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle & flush pipe, fixed in position and connecting complete.Make : Jaquar, Perryware, hindware,Cera |
| 9 | S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, PVC flexible waste pipe complete all as specified and directed. |
| 10 | S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed. Make : Nirali, Silver Shine (blue star), Prayag |
| 11 | Supply and fix in repairs 500 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified & directed. |
| 12 | Supply and fix in repairs 1000 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified & directed. |
| 13 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete and all as specified. |
| 14 | Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm- 65gms)inlet /outlet suitable for 25 mm bore pipe all as directed by Engineer in charge. |
| 15 | S&F in repair Health Fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook all as specified and as directed. Make: Prayag Cat No. 451Make:- Plumber / Prayag / Cera |
| 16 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete and all as specified. |
| 17 | S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete. |
| 18 | S&F in repairs plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 20 | S&F in repair 600 mm x 450 mm x 5 mm thick mirror selected quality, mounted on 4-5 mm thick water proof plywood (BWP grade), with aluminium angle beading all around, fixed on wall with nylon sleeve & cadmium plated screws complete. |
| 21 | S&F in repair stainless steel kitchen plate rack of size 31\\" x 24\\" x 10\\" deep, fabricated with 0.63 mm sheet fixed in position on wall complete. |
| 22 | S&F in repairs waste coupling of PTMT of bore dia 40mm (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 23 | S&F in repair Waste pipe of PVC 31/32 mm x 800mm long complete |
| 24 | S&F in repairs water tank covers for 500/1000 ltrs capacity tank complete all as specified and directed. |
| 25 | S&F in repairs 15mm Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 26 | S&F in repairs 20mm Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 27 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed / ceiling or laying in floors including taking down of existing GI pipe of 20mm dia etc complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 28 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors including taking down of existing GI pipe of 25mm dia etc complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 29 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete. |
| 30 | S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified. |
| 31 | S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed. |
| 32 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 33 | M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed. |
| 34 | M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 35 | M&L for joint free coloured glazed ceramic tiles thickness not less than 7mm size of tiles 450mmx300mm as in skirting / dado etc laid jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over & including 10mm thick backing coat in CM 1:4 complete all as specified & directed. |
| 36 | M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.11 sqm but n exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 37 | Dismantling of granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed. |
| 38 | M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete. |
| 39 | M&L for rounding to edges of Granite stone slabs edge, such as in steps cooking plateform, and other similar situation. |
| 40 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. all specified and directed. |
| 41 | M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 42 | M&L for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10 mm thick rendering in cement mortar 1:6 (as first coat) on stone / PCC blockmasonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement. |
| 44 | M & L for preparation of new plastered surfaces of walls & applying two coat of distemper oil emulsion over a coat of primer over and including cement base wall cair Putty on wall surfaces complete. |
| 45 | M&L for preparation of pastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete. |
| 46 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed. |
| 47 | Taking down shutters of any description n.exc 1 Sqm each |
| 48 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each |
| 49 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed. |
| 50 | S&F IInd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 51 | S & F 35 mm thick IInd class HW glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. |
| 52 | S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 53 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete all as specified and directed. |
| 54 | S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, aluminium tower bolt tower bolt 100 mm long and aluminium handle 150 mm long as per specification and complete all as specified and directed. |
| 55 | S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 56 | S & F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed to wooden / iron / aluminium frame with wooden / iron / aluminium beading and fixed with nails / nut & bolts or wire staples complete all as specified and directed. |
| 57 | S&F in repairs 3 mm thick sheet/frosted glass ordinary quality and glazing with oil putty / rubber beeding and screw n.exc 0.50 sqm in each pane fixed to wooden/metalic frame complete all as specified and directed. |
| 58 | M & L for 100mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed. |
| 59 | M & L for 75mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed. |
| 60 | S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 61 | S&F 100mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 62 | S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 63 | S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed. |
| 64 | S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 65 | S & F in repair 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 66 | S & F in repairs 150mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 67 | S & F in repairs 100mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 68 | S & F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 69 | S & F in repairs 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 70 | S & F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed. |
| 71 | S & F in repairs 25 mm dia curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed. |
| 72 | Repairs and fixing only existing curtain rails, decorative type mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc complete all as specified and directed. |
| 73 | S&F mild steel hold fast and similar works fabricated with mild steel section conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 74 | M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) for fixing hold fast including necessary formwork, complete all as specified and directed. |
| 75 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 76 | M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 77 | S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 78 | S&F in repairs 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 79 | S&F in repairs door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. |
| 80 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 81 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791) fixed in position. Concealed type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.30 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.30 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.35 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.355 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.30 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. |
| 82 | S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note:-(i) Section number given above are of make Jindal, Contractor may use similar section of other make mentioned in Appx B. |
| 83 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below including taking down old door shutter with frame complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). |
| 84 | S&F for 12mm thick toughened glass door any size including all accessories (floor spring, fancy handle, locking system) and all fixing arrengement fixed with wall and floor incl taking down complete all as specified and directed. |
| 85 | Supply and fix powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws including Sheet glass of 4 mm thick and 12mm thick prelaminated Particle board including taking down old u/ partition etc, complete all as specified and as directed by Engineer-in-Charge. |
| 86 | S & F in repairs Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs / ceilling complete all as specified all as specified. |
| 87 | S&F in repairs non asbestos fibre cement building board (E- Board) 4 mm thick for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed. |
| 88 | M & L for preparation of new unplastered surfaces over ceiling and applying two coats of oil bound distemer over a coat of primer on board complete all as specified and directed. . Make : Nerolac, Asian Paint Ltd, Berger (Luxul) |
| 89 | S& F in repairs false ceiling with 12 mm thick of size 1.20 m*2.40 m plaster of paris sheets cut at any size and fixed with machine screws on and including GI channel 22 gauge thick grid work , main joists places at 1.20 m centre to centre , hanging with 22 gauge GI strip suspenders from roof J hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with gypsum anhydrous binder and preapare the surface till smooth surface is achieved and applying two coat of texture paint of any paint and design over a coat of texture of primer on ceiling sheets all complete as reqd as per manufacturers instructions and as directed by engr in charge . ( pattern and design shall be directed by engr in charge during execution of work )(the exposed surface of the false ceiling shall be joint less even smooth to recieve texture paint )(the POP sheets shall be fixed with suitable screws below the grid shall not be placed over the grid) |
| 90 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 92 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 93 | S & F in repairs 40mm width continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 94 | Resecuring or easing & adjusting with taking down the shutter of any description exc 1 sqm and n.exc 2 sqm and fixed in same opening complete all as specified and directed. |
| 95 | S & F in repairs 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frme work or plywood complete all as specified and directed. |
| 96 | S&F in repairs 75mm size SS cupboard hinges complete all as specified and directed. |
| 97 | S&F in repairs magnatic catcher and connected plate not less than 36mm fixed with chromium plated screws to shutters and frame as per sample approved complete all as specified and directed. |
| 98 | S&F in repairs drawer handle, projection drop (50 mm to 65 mm) on screwed plate complete all as specified and directed. |
| 99 | S&F in repairs brass Hat and coat hooks, solid body, 175mm to 250 mm of minimum 05 hooks complete all as specified and directed. |
| 100 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and wooden plugs with CP brass screws & cup washers complete all as specified and directed. |
| 101 | M&L for Cleaning of HDPE service water tank of capacity exc 250 litre & up to 500 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background of tank complete all as specified and directed. |
| 102 | Removing building materials (Cement concrete any description, bricks, stone slab and tiles, bricks dust or mud etc) to outside of MD land beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed by Engr-In-Charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender