Tender For Provision Of Stairs In 18 Feet Diving Pool At Swimming Pool, Parking Shed At Certain Living In Area And Certain Other Minor Work At Af Stn Chandinagar Under Aor Of Ge (Af) Faridabad
Tender Value
43.95 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
20 days left
EMD
87900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baghpat → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Stairs In 18 Feet Diving Pool At Swimming Pool, Parking Shed At Certain Living In Area And Certain Other Minor Work At Af Stn Chandinagar Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Brick work with sub-class 'B' bricks straght or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 4 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint in any colours on wall over a coat of primer complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces and applying two coats of distemper oil emulsion in any colours on wall over a coat of primer including 3mm thick wall care putty complete all as specified and directed. |
| 6 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately. |
| 8 | S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain wiremesh/skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately. |
| 9 | S&F powder coated aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 10 | S&F powder coated aluminium window and ventilator shutters , side hung type / sliding without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing , anodised aluminum snap beading , screws, anodised aluminium fittings such as peg stays 150mm long (1No). hinges type B-21 100mm long (2 Nos) suitable handle (1No) complete all as specified and directed. |
| 11 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 12 | M&L 3 mm thick tinted sheet glass ordinary quality and glazing with oil putty/rubber/aluminium beading in square pane complete all as specified and directed. |
| 13 | S&F Butt hinges 100 mm long aluminium alloy anodised and fixed complete all as specified and directed. |
| 14 | S&F 150mm aluminium extruded alloy handles fabricated type complete all as specified and directed. |
| 15 | S&F 150 mm alumunium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 16 | M&L for anodised aluminium snap grid frame work of size 605 x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed. |
| 17 | M&L for 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. |
| 18 | M&L for hollow core 6 mm thick wood grain shade or as approved prelaminated PVC Wall Lining/panelling and in ceilings inclusive of solvent cement and fixing at site on PVC frame or aluminium snap grid work as per specifications and drawing complete all as specified and directed. |
| 19 | S&F 300 mm long aluminium alloy anodised, sliding door bolt with hasp ,staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 20 | Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed. |
| 22 | M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening/putty preparatory to distempering on surfaces of walls complete all as specified and directed. |
| 23 | M&L for providing and fixing stainless steel (Grade 304) railings/baluster/post/decorative chain made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge. |
| 24 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 25 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in and coping including necessary form work) complete all as specified and directed. |
| 26 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 27 | M&L in applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 28 | Excavation in post holes each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25Cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 29 | M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed. |
| 30 | S&F for mild steel work as in roof trusses (framed) , trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle, channel of flat section) incl distance pieces, cleats etc conforming Fe 410-W (Gde E 250) quality A complete all as specified and directed. |
| 31 | Surface dressing n.exc 15 cm deep and getting out in loose / soft soil complete all as specified and directed. |
| 32 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep for foundation etc. not exc 10 Sqm on plan getting out as in hard / dense soil complete all as specified and directed. |
| 33 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 34 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 35 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in foundation, filling & mass concrete complete all as specified and directed. |
| 36 | M&L for hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface with broken/stone/boulers complete all as specified and directed. |
| 37 | M&L for coloured Chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed. |
| 38 | Material and labour for pre polished granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed. |
| 39 | M&L for Precast cement concrete block for road side curb stone as per sample approved by GE for road side curve including necssary excavation and PCC 1:2:4 type B-1 for laying and setting in CM 1:4 complete all as specified and directed. |
| 40 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall including priming plastered surfaces complete all as specified and directed. |
| 41 | Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and directed. |
| 42 | S&F for mild steel work as in channel, angle and similer works, fixed independently, without connecting plates, etc conforming Fe 410-W (Gde E 250) quality A complete all as specified and directed. |
| 43 | S&F welded steel wire fabric supplied and fixed to wood or steel members (weight per square meter exc 4 kg /sqm ) complete all as specified and directed. |
| 44 | M&L for point wiring with copper conductor cable in PVC conduit for one light/fan point controlled by one switch with cables 1.5 sqmm size FRLS including PVC conduit complete all as specified and directed. |
| 45 | All as per item No 44 above but for 3 pin 5 Amps socket on Same board . |
| 46 | All as per item No 44 above but for 3 pin 5 Amps socket on independent board . |
| 47 | All as per item No 44 above but power point wiring (concealed) with 2.5 Sqmm singe core PVC insulated (FRLSH) unsheathed cable with stranded copper conductor for one switch socket outlet, 5/15 Amps muti purpose on independent modular plate including PVC unsheathed copper conductor of same dia as earth wire. |
| 48 | M&L in replacement Sub main wiring complete with two single core 6 sqmm,1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping complete all as specified and directed. |
| 49 | Supply and fixing Switch modular type,Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 50 | Supply and fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 51 | Supply and fixing Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 52 | Suppy and fixing modular Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 53 | S&F ceiling rose 65x50 mm 3 terminal, complete all as specified and directed. |
| 54 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 55 | S&F White cover frame with plate - 3 module complete all as specified and directed. |
| 56 | S&F White cover frame with plate - 6 module complete all as specified and directed. |
| 57 | S&F White cover frame with plate - 12 module complete all as specified and directed. |
| 58 | M&L earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F sheet metal enclousers MCB type DB suitable SPN 08 way 200 Amp rated bus bar double door type complete all as specified and directed. |
| 60 | S&F MCB SPN capacity 40 Amps , 240 V complete all as specified and directed. |
| 61 | S&F MCB SP capacity 6-32 Amps , 240 V complete all as specified and directed. |
| 62 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 63 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 64 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 65 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 3½ core complete all as specified and directed. |
| 66 | M&L for sand cushioning with a layer of sand, 80mm thick before laying of cable and 150mm thick after laying of cable to trenches, complete all as specified and directed. |
| 67 | M&L for brick sub class 'B' , size 230mm x 115mm x 75mm and laid in trenches as in protection of UG cables complete all as specified and directed. |
| 68 | S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed. |
| 69 | S&F LED Focus light for watch tower as below description Revolving Mechanism:- Motorized Motor, Aerosol plug design, spin velocity- Level：0.01°～ 20°/S；vertical：0.01°～10°/S , power consumption- ≤70W, Dimension:- 272mm×170mm×300mm（L×W×H） Features:- Control Options Remote Control & Manual ControllerMotorized Motor, Aerosol plug design, spin velocity- Level：0.01°～ 20°/S；vertical：0.01°～10°/S , power consumption- ≤70W, Dimension:- 272mm×170mm×300mm（L×W×H）Key Features:- • Long range powerful beam (>500M effective, visible up to 1KM). • Fully automatic motorized rotation with remote & manual panel control. • 360° horizontal °Clock wise and anti clock wise Direction and vise versa & 45° vertical movement for wide coverage. • Built with IP66 protection for outdoor and harsh environments. • Energy efficient 300W LED light with high brightness and low maintenance. • Surge protection and auto cut safety features for reliable operation.Body Material Aluminum Die Casting with 4 mm Toughened Glass with Back Driver, including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.. |
| 70 | Supply and install Tower type air conditioner 1.50 Ton (4500 Kcal/ hrs) capacity, LED Display,with LCD cord less remote type electric driven single phase consisting of indoor/ outdoor unit with herimatically sealed highest energy effcient rotary compressor conforming to IS-1391 Para 11 dully filled with R - 140 A (non CFC free refrigerant) gas through copper pipe of suitable size as required at site incl making holes on walls for cable entry and copper refrigeration pipe from compressor to condenser unit inside the room with proper thermal insulation, in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 complete all as specified and directed. Rate quoted is deemed to include for cutting, brazing, connecting of suitable size of copper pipe with R-140 A gas and complete testing at site to the entire satisfaction of the Engineer-in-Charge. |
| 71 | S&F Voltage stabilizer buck/ boost transformer type with automatic operation on single phase equiped with low and high voltage correction electronic transistorized relay suitable for correction single phase AC supply, 50 cycle complete with voltmeter and designed for in put voltage from 170-270 volts and out put voltage stabilized between 215 to 240 volts up to 30 Amps/ 5.0 KVA capacity complete all as specified and directed. |
| 72 | M&L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 20 mm dia including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from Sub DB to DB plug and socket complete all as specified and as directed.Note : Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured as one unit length |
| 73 | S&F Sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 240 Volts, 30 Amps capacity all as specified for split type AC complete all as specified and directed. |
| 74 | Supply & fixing in replacement of PVC pipe of size 20mm dia fixing on wall by using clamps and screwing including necessary etc collar bend socket etc complete all as specified and directed. |
| 75 | Supply and laying of XLPE LT 1100 Volt Grade, armourd under ground cable size of 16 Sqmm 4 core with stranded aluminium conductor in passing through suitable size of PVC pipes medium grade laying in wall /trecnch etc complele all as specified and directed. Note :- The rate of PVC pipes is being including in the rate quoted by the contractor |
| 76 | Supply and errect pole 3.5 mtr long ,double armed pole tube made out of MS pipe,base & embellishment casted with PU coating of approved colour ,with 02 Nos energy efficient 45 W LED IP65 pendant mounting street light aluminium die cast with clear acrylic front cover suitable for high efficient assymetric secondary lens LM80 certified for higher power 240 V ,lumen 100 lm/W and driver efficiency 85% with all accessories internally prewired and including connecting upto with twin core copper conductor cable complete. The pole shall be mounted on RCC pedestal as per design and drawing prepared by manufacturer all as specified and directed by Engr-in-Charge with following specifications- (a) Top Dia 76 mm(b) Casted dia 114 mm(c) Cement concrete 1:2:4 type B1 for foundations upto size 1'x1'x1' PCC from ground level with proper fixing arrangements such as nut/bolt/washers over PCC work all as specified and directed.Note:-Including necessary jointing material on lugs ,glands etc as required at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender