Tender For Repair And Maintenance Of Public Health Services At Beant Singh Memorial Sector-42, Chandigarh.
Tender Value
3 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
6017
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Public Health Services At Beant Singh Memorial Sector-42, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. .2.8 |
| 2 | All kinds of soil. .2.8.1 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 5 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement of mix : .13.7 |
| 9 | 1:3 (1 cement: 3 fine sand) .13.7.1 |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7 |
| 11 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps .17.7.1 |
| 12 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16.A |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 14 | Flexible pipe .17.28.2 |
| 15 | 32 mm dia .17.28.2.1 |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall .18.10 |
| 17 | 32 mm dia nominal bore .18.10.4 |
| 18 | 40 mm dia nominal bore .18.10.5 |
| 19 | 50 mm dia nominal bore .18.10.6 |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : .18.17 |
| 21 | 32 mm nominal bore. .18.17.2 |
| 22 | 40 mm nominal bore. .18.17.3 |
| 23 | 50 mm nominal bore. .18.17.4 |
| 24 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : .18.18 |
| 25 | 25 mm dia nominal bore .18.18.3 |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 27 | 45 cm length .18.21.2 |
| 28 | 15 mm dia nominal bore .18.21.2.1 |
| 29 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork) : .18.46 |
| 30 | 32 mm nominal bore. .18.46.4 |
| 31 | 40 mm nominal bore. .18.46.5 |
| 32 | 50 mm nominal bore. .18.46.6 |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank .18.48 |
| 34 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53.A |
| 35 | Repair and rewinding of submersible motor complete change of bearing and servicing with dismentling for position and refixing the motor after servicing and alignment complete in all respect to the entire satisfaction EIC. .NSR |
| 36 | Capacity 7.5. H.P. . |
| 37 | Providing and fixing of C.P grating of approved make .NSR |
| 38 | Providing and fixing of CP waste for wash basin/ urinal complete in all respect .NSR |
| 39 | Providing and fixing of PVC (Two Piec seat) seat cover for EWC complete in all respect .NSR |
| 40 | Providing and fixing of PVC cover for water strorage tank cover duly ISI marked of approve make .NSR |
| 41 | 500 to 1000 Ltrs. Cap .i) |
| 42 | 2000 to 5000 Ltrs Cap .ii) |
| 43 | Providing and fixing of Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete in all respect .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender