Tender For Construction Of Residential Quarter 1 Sets At Hss Tyakshi. Adv. Cost: 17.16 Lacs (Excl. Gst) Scheme: Samagra Shiksha Block: Turtuk
Tender Value
17.16 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
5 days left
EMD
34300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Residential Quarter 1 Sets At Hss Tyakshi. Adv. Cost: 17.16 Lacs (Excl. Gst) Scheme: Samagra Shiksha Block: Turtuk
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil |
| 2 | Dry stone pitching (any thickness) including cost of stones. On Horizontal level. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain windowsills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: A) Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | B) Columns, pillars, piers, abutments, posts and struts. |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in mud mortar using approved quality mud with carriage of material complete |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood |
| 17 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 1st Class Kail wood 30 mm thick |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 19 | Providing and fixing up-to floor five level precast cementbn concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and complete1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate of 20mm nominal size) |
| 20 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 21 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 22 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 24 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 25 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement |
| 26 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm. |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 29 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;Budloo wood |
| 30 | Carriage of Sand and C.Agg from an average lead up to 10km by mechanical transport. |
| 31 | Carriage of Stones from an average lead up to 5 km by mechanical transport. |
| 32 | Carriage of cement and steel by MT 100 kms |
| 33 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps. |
| 35 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings |
| 36 | Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan. |
| 37 | Providing and fixing 8 mm dia C.P /S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C of quality and make as approved by Engineer – in – charge. |
| 38 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,)PN-16 PIPE 25MM OD |
| 39 | PN-16 PIPE 32MM OD |
| 40 | Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand by way of self regulating heat cable / K-Flex wire 19mm/ tape/rock wool/ chicken mesh/ black polythene/28/26/ gauge aluminium sheet with screws including labour charge. all complete a) 100 |
| 41 | b) 75 mm |
| 42 | Providing and fixing toilet paper holder c.p brass |
| 43 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 44 | Providing and fixing PTMT - Towel Ring 215x200x37 mm |
| 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete. |
| 46 | Providing and fixing CP brass basin mixer pillar tap of approved quality and make. |
| 47 | Providing and fixing CP brass wall mounted basin mixer pillar tap of approved quality and make |
| 48 | Providing and fixing CP brass bib cock of approved quality and make |
| 49 | Providing and fixing CP brass stop cock of approved quality and make |
| 50 | Providing and fixing floor jalli |
| 51 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.Flexible pipe 32 mm dia. |
| 52 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 3.1 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 53 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. |
| 54 | Providing and fixing of material for the insulation of pipe with nitrile tube, tapping with cello tape, Rockwood 6 inch per side, wire mesh , polythene, tapping with cello tape aluminium sheet 26 guage cladding with dia complete job including carriage25MM |
| 55 | providing and fixing heat tape 33 watt on PPR pipes made of denforced or chromelox or equivalent make , as approved by Engineer in charge , Complete Job. |
| 56 | providing and fixing of material for the insulation of Water storage tank with nitrile sheet , tapping with cello tape, Rockwood 6 inch per side, wire mesh polythene, aluminium sheet 26 guage cladding with dia of complete job 19mm thick nitrile sheet. |
| 57 | Providing and fixing gate valve (PPR) of approved quality, High or low pressure, with plastic floats complete.40 mm nominal bore. |
| 58 | Providing and fixing ball valve (PPR) of approved quality, High or low pressure, with plastic floats complete.32 mm nominal bore.(PPR) |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 60 | Providing and fixing double equal plain junction of required degree:75X75X75MM |
| 61 | 100X100X100MM |
| 62 | Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 1.5 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required. |
| 63 | Wiring for 20 amp socket outlet with 2.5mm FR/PVC insulated copper cond. Cable in existing recessed PVC Conduit. |
| 64 | S/F of 1 inch. 3/4 inch PVC conduit capping along the accessories in surface / recessed incl cutting the wall etc. |
| 65 | Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutters and 10amp switch 240 volt single pole mounted in recessed including m.s box complete as required. |
| 66 | Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp switch 240 volt single pole mounted in recessed including m.s box complete as required. |
| 67 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos. 3 pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular switch, connection etc. as required |
| 68 | S/F SPN sheet steel MCB dist. Box 240 volt on surface recess complete with tinned bus bar etc12 way |
| 69 | Supplying and fixing of the following light fixture including all accessories like LED conceal light of 12 watt . complete as required concealed as per Philips, havells, Panasonic. |
| 70 | Supply of 11000 volt grade aluminium conductor KPLE insulated PVC sheath arramged complete as per specification as required 25 sqmm 3.5 core |
| 71 | 6 modular plate |
| 72 | 3 modular plate |
| 73 | Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required Single pole 6/10/16Amp |
| 74 | Supply and fixing of MCB of following poles in the existing MCB TPN complete with connections testing and commission etc, as required DP 63Amp |
| 75 | Supply and fixing of LED street light of 50 watt incl. clamp bracket etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender