Tender For Maintenance Of Water Supply System To Porvorim And Surrounding Areas - Urgent Repairs To 180Hp Mather And Platt Make Centrifugal Pump Set No. 1 At Pda Pump House At Porvorim In Bardez Taluka
Tender Value
12.10 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
4 days left
EMD
24203
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Water Supply System To Porvorim And Surrounding Areas - Urgent Repairs To 180Hp Mather And Platt Make Centrifugal Pump Set No. 1 At Pda Pump House At Porvorim In Bardez Taluka
BOQ
| Sl. No. | Item Description |
| 1 | Service Charges for repair and overhauling of Mather & Platt make 150/200 CST model 180HP capacity Pump, job includes dismantling the pump, removing the rotating assembly, replacing the worn out spares (cost of spares to be paid separately), machining of top and bottom casing, assembling back the pump, applying two coats of enamel paint for casing and base frame, making perfect alignment of the pump with motor and commissioning. The cost is inclusive of transportation of rotating assembly from pump house to the workshop and vice versa |
| 2 | Supplying of Spares (MOC)i) Sleeve (S.S. 410) |
| 3 | Supplying of Spares (MOC)i) sleeve nut (S.S. 410) |
| 4 | Supplying of Spares (MOC)i) Sleeve O Ring (EPDM) |
| 5 | Supplying of Spares (MOC)i) Neck Ring (CF8) |
| 6 | Bearing (DE & NDE) (SFK/ FAG) |
| 7 | Casing split gasket (Press pahn paper) |
| 8 | Lock nut with washer (MS) |
| 9 | Water thrower (EPDM) |
| 10 | Water sealing tube (Reinforced steel) |
| 11 | Air vent cock (SS 304) |
| 12 | Fasteners (HTS 8.8) |
| 13 | Gland packing (Graphited cotton) |
| 14 | Dynamic balancing of impeller |
| 15 | Providing & fixing stainless steel glycerine filled pressure gauge 10-14 Kg/cm2 along with ball valve, SS siphon tube and necessary fittings. |
| 16 | Supply and installation of Pin bush type coupling with bushes. The cost is inclusive of boring the coupling as per motor and pump shaft size. |
| 17 | Disconnection of power cables, decoupling, removal of Crompton Greaves Make 132 Kw, 415V, 1438 RPM Squirrel cage induction motor from base frame, carrying motor to the workshop, overhauling of the stator and rotor including cleaning with electro sol, washing the same, quick drying, baking varnishing for improvement of insulation resistance, extending cable lead wires, replacement of cable connecting studs and plate, replacement of driving end and non driving end bearings with SKF/FAG make bearings, re- assembly, testing at Workshop on no load, applying two coats of enamel paint, refitting the motor on the base frame and making cable & earthing connections and commissioning. The cost is inclusive of loading & unloading of motor and transportation in a suitable vehicle from Pump house to the workshop and vice versa. |
| 18 | Supplying at store or site of work including freight, transit insurance ,carting, loading, unloading, stacking,etc. Ductile Iron double flanged, manually operated Sluice valve generally confirming to IS 14846-2000,with Body, Bonnet of Ductile Iron of grade GGG40 or SG 400/12, 400/15, 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions, four faces and spindle nut of leaded gun metal of IS 318 GR LTB 2/Al Bronze, inside screw of non-rising stainless steel AISI 410/420 spindle. . The valves should be coated with electrostatic Powder/ Epoxy Coating on both inside and outside minimum 250 microns thickness of blue colour RAL5017/5005 suitable for drinking water. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400 B38mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A); Nominal dia in MM; 400 |
| 19 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Flanged Socket Tail piece ( Flanged Adaptors); Nominal Dia in mm; 400 |
| 20 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. .complete as directed as per IS:2685-1971 CLASS II & III.; Nominal diameter in mm.; 400 |
| 21 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints, forpushon tight joints, and including the cost of rubber ring, nut bolts, for flanged joint, including the cost of work force, tools, hydraulic testing of joints,etc. complete as per the direction of the engineer in-charge.; Flanged Socket ; 400 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender