Tender For Construction Of Level-Iii Trauma Centre Building At Kotkhai, District Shimla (Hp). (Sh:- Civil Work, W.S & S.I, Rain Water Harvesting Tank, Septic Tank Including Soak Pit, Site Development And Electrical Installation Etc.)
Tender Value
10.51 Crore
Estimated cost
Bid Submission
22 Sep 2026
11 days left
EMD
20.51 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Level-Iii Trauma Centre Building At Kotkhai, District Shimla (Hp). (Sh:- Civil Work, W.S & S.I, Rain Water Harvesting Tank, Septic Tank Including Soak Pit, Site Development And Electrical Installation Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drain etc. in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the CP.PWD. specification and sorting out useful and unuseful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor at his own level) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load , animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries , tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 2 | Excavation in soil in Hilly Area by mechanical/manual means including cutting and trimming of side slopes etc as per Technical Specification Clause 1603.in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the CP.PWD. specification and sorting out useful and unuseful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor at his own level) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load , animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries , tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the CP.PWD. specification and sorting out useful and unuseful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor at his own level) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load , animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries , tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per CPWD specifications including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 5 | Providing centering and shuttering including strutting, propping etc. and removal of form for Foundation footing and basis of columns, etc. and mass concrete as per CPWD specifications including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 6 | Providing centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc as per CPWD specifications including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per CPWD specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers as per CPWD specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 9 | Providing centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts as per CPWD specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 10 | Providing centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral staircases as per CPWD specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 11 | Providing centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls under twenty centimetre wide as per CPWD specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 12 | Providing and laying in position 1:6:12 (one Cement : six coarse sand : twelve gradedstone aggregate forty milimetre nominal size)mechanically mixed and curing complete excluding cost of form work in foundation and plinth, as per CPWD spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location trough all modes of transportation in all leads lifts and all incidental charges .The rate is including octroi, royality, Malkana, toll tax or any other texes imposed by Goverment but excluding GST. |
| 13 | Providing and laying in position 1:4:8 (one Cement : four coarse sand : eight gradedstone aggregate forty milimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth, as per CPWD spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location trough all modes of transportation in all leads lifts and all incidental charges . |
| 14 | Providing and laying Plain Cement concrete Grade M-10 (Nominal mix 1:3:6 ) mechanical mixed and vibrated for plain/reinforced concrete in open foundationsand similar works including form work and curing complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203ncluding carriage of materials in all leads and lifts. |
| 15 | Providing and laying in position reinforced cement concrete :1:2:4 (one cement : two coarse sand: four graded stone aggregate 20 mm nominal size) mechanically mixed and curing complete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 16 | Providing and laying Reinforced cement concrete work with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate twenty mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete.in walls (any thickness but not less than 0.10 metre thickness) including attached pillasters, buttresses, plinth and string courses, etc. from top of foundation upto all heights excluding the cost of centering, shuttering, finishing and reinforcement, including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 17 | Providing and laying Reinforced cement concrete work with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate twenty mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete.in beams, suspended floors, roofs, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, excluding the cost of centering, shuttering, finishing and reinforcement, including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 18 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix and curing complete, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. In alll works upto plinth level including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 19 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix and curing complete, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. In all works above plinth level upto floor all level including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 20 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix and curing complete, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. In alll works upto plinth level including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 21 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix and curing complete , including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. In all works above plinth level upto floor all level including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. |
| 22 | Providing and laying upto all floor levels cement concrete work 1:1½:3 (one cement : 1½ one point five sand : three graded stone aggregate 20mm nominal size)mechanical mixed and vibrated for compecting reinforced concrete and curing complete to give smooth and even surface including centring and shuttering but excluding cost of reinforcement upto floor all level including carriage of materials in all leads and lifts:-Moulding as in cornices, window sills etc. exceeding 15cm in girth in String courses, copings, bed plates, anchor blocks, plain windows sills and the like :. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 23 | Providing and laying upto all floor levels cement concrete work 1:1½:3 (one cement : 1½ one point five sand : three graded stone aggregate 20mm nominal size) mechanical mixed and vibrated for compecting reinforced concrete and curing complete to give smooth and even surface including centring and shuttering but excluding cost of reinforcement upto floor all level including carriage of materials in all leads and lifts:-Moulding as in cornices, window sills etc. in Moulding as in cornices window sills etc. not exceeding 15cm in girth.. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 24 | Providing steel reinforcement Thermo-Mechanically Treated bars of gradeFe-500D or more. for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire upto all floor level Mild steel and Medium Tensile steel bars including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 25 | Applying cement slurry on R.C.C slab or cement concrete work using 2.75 Kg of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 26 | Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (one Cement : three fine sand).including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 27 | Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposite direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of materials in all leads and lifts. |
| 28 | Providing and fixing 65mm thick Glass fiber Reinforced cement concrete Jali of NTC or equivalent, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits including carriage of materials in all leads and lifts. |
| 29 | Supplying and filing 25 mm nominal size crushed stone aggregate in soak pit including carriage of materials within all leads and lifts |
| 30 | Supplying and filing 12 mm nominal size crushed stone aggregate in soak pit including carriage of materials within all leads and lifts |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.: |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in Cement mortar 1:6 (one cement : six coarse sand) in all shapes and sizes including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 33 | Rat trap brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 laidon edge in superstructure above plinth level up to floor all level with cement mortar 1:4 (one cement : four coarse sand) in all shapes and sizes including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges |
| 34 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth with cement mortar 1:4 (one cement: four course sand). including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 35 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level. with cement mortar 1:4 (one cement: four course sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 36 | Supplying and filing brick bats in soakpit of required sizes including carriage of materials within all leads and lifts :- |
| 37 | Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in walls in cement mortar 1 : 4 ( one cement : four sand)and including rakingout joints .Including carriage of material within all leads and lifts. |
| 38 | Providing and fixing 100mm Dia PVC weep pipes in brick / stone masonry / plain concrete / RCC / abutment / wing wall / return wall extending through to the full length of the structure with slope of 1 : 20 towards drawing face comoplete as per drawing and technical specification clause 614/708, 1204.3.7 including carriage of materials within all leads and lifts. |
| 39 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of materials in all leads and lifts. |
| 40 | Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts |
| 41 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural for frames of door and windowdrawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):- for frames of door and window including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. : |
| 42 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural for frames of door and windowdrawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):-for Shutter of door and windowi/c hinges and making provision for fixing fitting.icluding carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. : |
| 43 | Providing and fixing 12 mm thick PHENOL BONDED prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. |
| 44 | Providing and fixing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm )glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic items including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 45 | Providing & fixing fly proof Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides wire gauze to windows,clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 46 | Providing and fixing powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment)including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.. |
| 47 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts |
| 48 | Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts |
| 49 | Providing and fixing 6 mm thick ply wood lining with butt jointing and nails. Framework and cover fillet to be measured and paid for separately.including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 50 | Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. |
| 51 | Providing and fixing square edges 1st class deodar wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete including carriage of material in all leads and lifts |
| 52 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc.complete as per directions of Engineer- in-charge.including carriage of material in all leads and lifts |
| 53 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)including carriage of material in all leads and lifts |
| 54 | Providing and fixing 20 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary including carriage of material in all leads and lifts |
| 55 | Providing and fixing 300 X 16 mm Powder coated aluminium sliding door bolts with bolts and nuts etc. complete including carriage of materials in all leads and lifts:- |
| 56 | Providing and fixing 250X 16 mm Powder coated aluminium sliding door bolts with bolts and nuts etc. complete including carriage of materials in all leads and lifts:- |
| 57 | Providing and fixing 250 X 10 mm Powder coated aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:- |
| 58 | Providing and fixing 200 X 10 mm Powder coated aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:- |
| 59 | Providing and fixing 150 X 10 mm Powder coated aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:- |
| 60 | Providing and fixing 125 mm Anodised aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :- |
| 61 | Providing and fixing 100 mm Anodised aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :- |
| 62 | Providing & fixing Twin Rubber stopper Powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of materials in all leads and lifts :- |
| 63 | Providing and fixing brass die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.including carriage of materials in all leads and lifts :- |
| 64 | Providing and fixing 65x35mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete.including carriage of materials in all leads and lifts :- |
| 65 | Providing and fixing 50 mm CP brass cup board or ward robe knob with nuts complete.including carriage of materials in all leads and lifts :- |
| 66 | Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete. including carriage of materials in all leads and lifts :- |
| 67 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 68 | Providing & fixing 115 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts :- |
| 69 | Providing & fixing Powder coated aluminium Hooks and Eyes with necessary screws including carriage of materials in all leads and lifts :- |
| 70 | Providing & fixing 150 mm Stainless steel single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts :-. |
| 71 | Providing & fixing 150 mm stainless steel double acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts :- |
| 72 | Providing and fixing 75 X 65mm deodar wood handrail in straight length including moulding or sunk to receive iron core complete.including carriage of materials in all leads and lifts :- |
| 73 | Providing and fixing 4.00 mm thick all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts. |
| 74 | Providing and fixing 0.63 mm thick PGI sheet lining (back side of toilet/SDB shutter) with approved adhesive and necessary screws etc. complete including carriage of materials in all leads and lifts :-. |
| 75 | Providing and laying 25 mm thick mirror polished Kota stone slab of size 55x55 CM of uniform colour in flooring and treads of steps over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : complete as per architectural drawing and direction of Engineer-in-charge i/c carriage of materials within all leads and lifts. |
| 76 | Providing and lfixing 20 mm thick Mirror polished Kota stone slabs of size 55x55 cm in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of material within all leads and lifts. |
| 77 | Providing and layiing 20 mm thick Baroda green Marble stone in flooring as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete. including carriage of material within all leads and lifts. |
| 78 | Providing and fixing white makrana marble stone 7.5 cm wide band in flooring over 20 mm thick base of Cm 1:4 I/C jointing with Cement slurry mixed with pigment to match the shade of stone i/c rubbing and polishing complete.ncluding carriage of material within all leads and lifts. |
| 79 | Providing and fixing Baroda green Marble slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of material within all leads and lifts. |
| 80 | Providing and fixing white Marble stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of material within all leads and lifts. |
| 81 | Providing and layiing full body vitrified floor tiles of size 60x120 cm in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material within all leads and lifts. |
| 82 | Providing and fixing full body vitrified floor tiles of size 60x120 cm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeincluding carriage of material within all leads and lifts. |
| 83 | 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts :- |
| 84 | Providing 18 mm thick Cement plaster skirting upto 30 cm height with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.including carriage of material within all leads and lifts. |
| 85 | Providing and fixing 2.0mm thick seamless static pulse antibectarial vinyl tile flooring size 600x600 mm of approved coloured of LG or its equivalent fixed with polyurethane conductive adhesive plain or coloured , carbed or mosaic/ metalled finish on sub-floor (damp proofing treatement to be paid for seperately) complete. .The joint of Tile floor shall be give U- shaped groove with the grooving machine toinsert welding bars the tile joint further welded by heat fusion process to get seamless floor with the coving of same shade as that of flooring 10x10 cm x12mm complete in all respect as per architect Drg.including carriage of material within all leads and lifts. |
| 86 | Providing and Laying 40 mm thick rubbed Red Mandana stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.including carriage of material within all leads and lifts. |
| 87 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457,complete In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) as per the direction of Engineer-in- Charge including carriage of material within all leads and lifts. |
| 88 | Providing and laying antiskid digital ceramic tiles of size 60x60 cm tile in flooring conforming to IS : 15622 of approved make in requred colours , laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all leads and lifts :- |
| 89 | Providing and laying antiskid Ceramic tiles Grade-IV of size 60x60 cm in flooring conforming to IS : 15622 of approved make in requred colours , laid on 20 mm thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all leads and lifts :- |
| 90 | Providing and fixing First quality White/coloured glazed tile 30X45 cm conforming to IS: 15622 of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (one cement: three sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including carriage of materials within all leads and lifts :- |
| 91 | Providing and fixing ceramic wall tile 30x60 cm conforming to IS: 15622 of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including carriage of materials within all leads and lifts :- |
| 92 | Providing and fixing 20 mm thick granite Stone of required colour/shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of materials within all leads and lifts :- |
| 93 | Providing edge moulding to 20 mm thick granite stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 94 | Extra for fixing marble /granite stone, over and above corresponding asic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 95 | Extra for making pre finished nosing in treads of steps of Kota stone / Marble Stone 20 mm thick i/c polishing complete. |
| 96 | Providing and laying 60 mm thick interlocking paver blockheavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over subbase of concrete with 25 mm thick average thickness of cement mortar 1:4( one cement : four sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complet Subbase concrete floor to be paid for separately. including carriage of materials within all leads and lifts. |
| 97 | Providing and laying Trimix flooring of reinforced cement concrete pavement of grade 1:1.5:3 (one cement : one point five coarse sand): three graded stone aggregate 20 mm nominal size) including the cost of centering and shuttering and Reinforcement with 8mm dia bar @ 300mm C/C both way single mesh bottom placing. The concrete shall be laid and finished with niddle vibrator then after screed board vibrator, vacuum dewatering process and finally finished by sprinkeling of hardening compound Nitoflor of FOS guard on surface evenly @ 5kg per sqm and finishing the surface by floating, brooming with wire brush etc. The width of pavement shall be maximum 4000 mm and groove of appropriate size 10 mmX20 mm shall be cut with machine on appropriate spacing as directed by Engineer-in-charge and filling this groove with approved grout/ sealent with beckar rod including making good the same.including carriage of materials within all leads and lifts |
| 98 | Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts. |
| 99 | Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts. |
| 100 | Providing and fixing valley 90 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts. |
| 101 | Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of a TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts. |
| 102 | Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. |
| 103 | Providing and fixing on wall face PVC 150 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- |
| 104 | Providing and fixing on wall face 150 mm dia PVC door bend for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- |
| 105 | Providing and fixing on wall face 150 mm dia PVC plain bend for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- |
| 106 | Providing and fixing on wall face 150 mm dia PVC plain shoe for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :- |
| 107 | Providing and fixing M.S. holder bat clamps 150mm dia of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc including carriage of materials within all leads and lifts :- |
| 108 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) ncluding carriage of materials in all leads and lifts :- |
| 109 | Structural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. ncluding carriage of materials in all leads and lifts :- |
| 110 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works. i including carriage of materials in all leads and lifts :- |
| 111 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. including carriage of materials in all leads and lifts :- |
| 112 | Providing and fixing MS hollow rectangular hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. including carriage of materials in all leads and lifts : |
| 113 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.ncluding carriage of materials in all leads and lifts :- |
| 114 | Providing and fixing M.S. hollow pipe in vertical posts in various dia/ sections welded in straight lengh over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. including carriage of materials in all leads and lifts : |
| 115 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover ncluding carriage of materials in all leads and lifts :- |
| 116 | Providing and fixing ball bearing for rolling shutters including carriage of materials in all leads and lifts : |
| 117 | Extra for providing mechanical device chain and crankoperation for operating rolling shutters Exceeding 10.00 sqm and upto 16.80 sqm in the area including carriage of materials in all leads and lifts : |
| 118 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within allleads and lifts.. |
| 119 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting iWith ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) ncluding carriage of materials within all leads and lifts : |
| 120 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts : |
| 121 | Applying priming coat on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer.including carriage of materials within all leads and lifts : |
| 122 | Painting with Satin enamel paint of approved brand and manufacture to give an even shade Two or more coats on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required. i :ncluding carriage of materials within all leads and lifts : |
| 123 | 6mm cement plaster to ceiling in cement mortar 1:3 (one cement : three sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within allleads and lifts :- |
| 124 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth with CM 1:6 (one cement: six coarse sand) on Rough Side including carriage of materials within allleads and lifts.. |
| 125 | 15 mm cement plaster in pattern as shown in elevation in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth with CM 1:6 (one cement: six coarse sand) on fair Side including carriage of materials within allleads and lifts.. |
| 126 | 15 mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth with CM 1:6 (one cement: six coarse sand) on fair Side including carriage of materials within allleads and lifts.. |
| 127 | 15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth with Cement mortar 1:4(one cement : four sand) including carriage of materials within all leads and lifts :- |
| 128 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: In one coat including carriage of materials within all leads and lifts :- |
| 129 | 12 mm thick plain cement mortar bands in cement mortar 1:4 (one cement : four fine sand): including carriage of materials within all leads and lifts.. |
| 130 | Finishing walls with Acrylic Smooth exterior paint of required shade ,brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including applying of putty a required for metling the surface including carriage of materials within all leads and lifts.. |
| 131 | Finishing On concrete/Plaster work with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.including carriage of materials within all leads and lifts.. |
| 132 | Distempering two or more coats on undecorated ceiling/sloping surfaces with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of materials within all leads and lifts.. |
| 133 | Distempering two or more coats on undecorated wall surfaces with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of materials within allleads and lifts.. |
| 134 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials within allleads and lifts.. |
| 135 | Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts. |
| 136 | Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts. |
| 137 | Providing and fixing 15 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials within all leads and lifts. |
| 138 | Providing and fixing 20 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials within all leads and lifts. |
| 139 | Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including carriage of materials within all leads and lifts. |
| 140 | Fixing water meter and stop cock in 20mm nominal bore :- G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).including carriage of materials within all leads and lifts. |
| 141 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of required capacity , IS : 12701 marked, with cover and suitable locking arrangement of various capicityand making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials within all leads and lifts. |
| 142 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : fine sand : ten graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 :including carriage of materials within all leads and lifts. |
| 143 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge INTERNAL WORK - EXPOSED ON WALL 1216 mm (16 mm O.D. pipe) including carriage of materials within all leads and lifts. |
| 144 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge INTERNAL WORK - EXPOSED ON WALL 1620 mm ( 20 mm OD pipe). including carriage of materials within all leads and lifts. |
| 145 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. 1216 mm (16 mm O.D. pipe) including carriage of materials within all leads and lifts. |
| 146 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. 1620 mm (20 mm O.D. pipe) including carriage of materials within all leads and lifts. |
| 147 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1216 mm (16 mm O.D. pipe) including carriage of materials within all leads and lifts. |
| 148 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1620 mm (20 mm O.D. pipe) including carriage of materials within all leads and lifts. |
| 149 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes 150 mm dia ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts. |
| 150 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes 150 mm dia ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts. |
| 151 | Providing and fixing 150 mm dia PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 152 | Providing and fixing 110 mm dia PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 153 | Providing and fixing 150 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- |
| 154 | Providing and fixing 110 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- |
| 155 | Providing and fixing 150 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 156 | Providing and fixing 110 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 157 | Providing and fixing 150 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 158 | Providing and fixing 110 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 159 | Providing and fixing 150 mm dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 160 | Providing and fixing 110 mm dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 161 | Providing and fixing 150 mm dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.including carriage of materials within all leads and lifts :- |
| 162 | Providing and fixing 110 mm dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.including carriage of materials within all leads and lifts :- |
| 163 | Providing and fixing 110 mm x 90 mm PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of materials within all leads and lifts :- |
| 164 | Providing and fixing 150 mm dia PVC cow including fixing with approved adhesive etcl including carriage of materials within all leads and lifts :- |
| 165 | Providing and fixing 110 mm dia PVC cowl including fixing with approved adhesive etc including carriage of materials within all leads and lifts :- |
| 166 | Providing and fixing 150 mm dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- |
| 167 | Providing and fixing 110 mm dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- |
| 168 | Providing and fixing 150 mm dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 169 | Providing and fixing 110 mm dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. |
| 170 | Providing and fixing 150 mm x 110 mm dia PVC reducer ISI marked including jointing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 171 | Providing and fixing 110 mm x 90 mm dia dia PVC reducer ISI marked including jointing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 172 | Providing and fixing 110mm dia PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 173 | Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729 including carriage of materials within all leads and lifts |
| 174 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm Sand cast iron S&S as per IS - 1729 ncluding carriage of materials within all leads and lifts |
| 175 | Cutting Chase 100 mm dia.in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) :including carriage of material within all leads and lifts:- |
| 176 | Providing and fixing white vitreous china water closet squatting pan (Indian type) (Earthwork, bed concrete and traps to be measured and paid for seperately Big size Orrissa pan No:-20004 of Hindware including carriage of material within all leads and lifts:- |
| 177 | Providing and fixing white vitreous china (European type/ wash down type) water closet pan with integral \\"P\\" or \\"S\\" trap. European type WC pan No 20011 of CERA / HINDWARE including carriage of materials within all leads and lifts :- |
| 178 | Providing and fixing white vitreous china (European type/ wash down type) water closet pan with integral \\"P\\" or \\"S\\" trap. Anglo Indian seat No 20012 in white shade of CERA including carriage of materials within all leads and lifts :- |
| 179 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials within all leads and lifts : |
| 180 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :Solid Type White solid plastic seat with lid including carriage of materials within all leads and lifts : |
| 181 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including carriage of materials within all leads and lifts :- |
| 182 | Providing and fixing viterous China wash basin Cat No-10001 of Cera with single hole Basin mixer with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :- |
| 183 | Providing and fixing viterous China under counter wash basin Zen Cat No10049 of Cera with single hole Basin mixer with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :- |
| 184 | Providing and fixing white vitreous China half stall urinal with white PVC automatic flushing cistern, with fitting, standard size C.P Brass flush pipe, spreaders Flat back small urinal of Cat No 60001 with 5 litres P.V.C automatic flushing cistern including carriage of materials within all leads and lifts : |
| 185 | Providing and fixing white vitreous china divisional plate for urinal of size 90x320x720 mm including carriage of materials within all leads and lifts : |
| 186 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Flamingo Sink of size 45.8x40.7x20.3 cm including carriage of materials within all leads and lifts : |
| 187 | Providing and fixing Stainless steel sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Platino Sink of size 81.3x 50.8x20.3 cm with singledrain board including carriage of materials within all leads and lifts : |
| 188 | Providing and fixing stainless steel Kitchen sink of approved standard with C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. Sink of size 45 X 60 CM of Hindware/cera without drain board including carriage of materials within all leads and lifts : |
| 189 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials within all leads and lifts : |
| 190 | Providing and fixing white vitreous china pedestal Cat No 11003 in White shade of Cera /Hindware/Perriware for wash basin completely accessed at the back for the reception of pipes and fittings. including carriage of materials within all leads and lifts : |
| 191 | Providing and fixing C.P Bottle trap (heavy duty ISI marked I.S No 8931 & 8934) for wash basin and sink including carriage of materials within all leads and lifts. |
| 192 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts :- |
| 193 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia Flexible pipe . including carriage of materials within all leads and lifts : |
| 194 | Providing and fixing 100 mm CP grating for Nahani / gully / Floor trap including carriage of matterials within all leads and lifts . |
| 195 | Providing and fixing 600mmx450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. including carriage of materials within all leads and lifts :- |
| 196 | Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts :-(600x20mm) including carriage of materials within all leads and lifts :- |
| 197 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 198 | Providing and fixing soap dish recessed type stainless steel No. 1531 of Hotelier series fixed to wooden cleats with s.s screws including carriage of materials within all leads and lifts :- |
| 199 | Providing and fixing toilet paper holder with flap recessed type No.1553 :of hotelier series of jaquar fixed with stainless steel screws etc complete including carriage of materials within all leads and lifts :- |
| 200 | Providing and fixing 100 mm dia C.P Brass shower rose with 15-20 mm inlet including carriage of materials within all leads and lifts :- |
| 201 | Providing and fixing 15mm dia C.P. brass bib cock of approved quality conforming to IS:8931 with flenge: including carriage of materials within all leads and lifts :- |
| 202 | Providing and fixing mixture for kitchen sink of Jaquar including carriage of materials within all leads and lifts :- |
| 203 | Providing and fixing 15mm dia C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts :- |
| 204 | Providing and fixing 45cms length and15mm nominal bore uplasticised PVC connection pipe (heavy duty ISI marked IS:8931& 8934) with brass unions including carriage of materials with all leads and lifts : |
| 205 | Providing and fixing C.P. brass stop cock (concealed) of standard esign and of approved make conforming to IS:8931.:including carriage of materials within all leads and lifts |
| 206 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms :including carriage of materials within all leads and lifts. |
| 207 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 gms :including carriage of materials within all leads and lifts :-. |
| 208 | Providing and fixing 15mm nominal bore brass full way valve with wheel including carriage of materials within all leads and lifts :- |
| 209 | Providing and fixing 20mm nominal bore brass full way valve with wheel including carriage of materials within all leads and lifts :- |
| 210 | Providing and fixing 15mm nominal bore Brass ball way valve( horizontal plunger type) high pressure with polythene plastic floats:including carriage of materials within all leads and lifts :- |
| 211 | Providing and laying 150 mm dia in trenches (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches.:including carriage of materials within all leads and lifts :-. |
| 212 | Providing and laying cement concrete 1:4:8 (one cement :four coarse sand : eight graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design :including carriage of materials within all leads and lifts :-. |
| 213 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : onepointfive coarse sand (zone- III) :three graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size) with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): :including carriage of materials within all leads and lifts :- |
| 214 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : onepointfive coarse sand (zone- III) :three graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions , With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): :including carriage of materials within all leads and lifts :- |
| 215 | Providing and fixing in position LD- 2.5 Rectangular shape 610x455 mm internal dimensions. pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials within all leads and lifts :- |
| 216 | Supplying and Fixing 300x300 mm Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): |
| 217 | Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete.including carriage of materials within all leads and lifts :- |
| 218 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks including carriage of materials within all leads and lifts :- |
| 219 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.including carriage of materials within all leads and lifts :- |
| 220 | Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels including carriage of materials within all leads and lifts :- |
| 221 | Providing and fixing grab bars in handicaped toilet of CP 40 mm dia steel pipes 78 cm heigh welded with MS plate as per detail and position of WC seat.and embedded in cement concrete complete.including carriage of materials within all leads and lifts :- |
| 222 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed Steel Conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per entire satisfaction of engineer in charge. i) Group C |
| 223 | Light Points Group C |
| 224 | Exhaust Fain Group C |
| 225 | Ceilling Fain Points Group c |
| 226 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 227 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ callbell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulatedcopper conductor single core cable in surface/ recessed steel conduit, andearthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor singlecore cable etc as required Group C |
| 228 | Group C |
| 229 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x 1.5 Sq. mm. |
| 230 | 2x1.5 Sqmm Circuit wire |
| 231 | 4x1.5 Sqmm Circuit wire |
| 232 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel Conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 233 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 234 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x6.0 Sq. mm. |
| 235 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x10.0 Sq. mm. |
| 236 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.. 4x10 Sq. mm. |
| 237 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.. 4x 16 Sq. mm. |
| 238 | Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 239 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 240 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 nos. 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For Light plugs to be used in non residential buildings).. [Computer point] |
| 241 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required: |
| 242 | MCB DB Double door-8 way |
| 243 | MCB DB Double door-12 way |
| 244 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB completewith connections etc. as required:-Single pole. Cat-A. |
| 245 | MCB Sp 6Amps to 32 AMPS |
| 246 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Double pole. Cat-A. |
| 247 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB),having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 Amps. Cat-A. |
| 248 | S/E of MCCB Amp. 4 Pole 415 Volt. with Thermal Magnetic Release for overload and short circuit protection 36 kA breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle. |
| 249 | MCCB 100 Amp. 16 ka 4 Pole Release with rotary handle |
| 250 | S/E of MCCB 200Amp./ 250 Amp. 4 Pole 415 Volt. with Microprocessor Release for overload and short circuit protection 36 kA breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle. |
| 251 | MCCB 200 Amp. 36 ka 4 Pole Release with rotary handle |
| 252 | Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as requiredSS Enclosure) 100 amp bus bar 24 \\"Details of cost for one each |
| 253 | 100 A Copper Busbar Chambers 24 '' (SS Enclosure) |
| 254 | 200 A Copper Busbar Chambers 24\\" (SS Enclosure) |
| 255 | Supplying installation testing & commissioning of Main L.T. Panel MCCB 400 amps 440 volts with tinned copper busbar ( TTA 61439 TYPE )600 A, 4P, 50kA, with Microprocessor Based Release having Inbuilt O/L, S/C & E/F Protections (Ics=100% Icu), Trip Contact floor mounted main LT Panel Enclosure cubicles designed verified assemblies completely as per IEC 61439 protection having from 3 B construction duly tested with 1K 10 shall be aestheic design dust damp & vermin proof shall be moudular extendable and shall have maintaince friendly construction shall have fully compartmentalized bolted construction shall be metal clad sheet steel enclosed cubicle floor mounting type suitable for indoor installation shall have structural steel frame work as per IEC 61439 part 1 & 2 shall have integral base frame with bottom cable entry having removable glands plates . the panel shall be made out of GI sheet steel & CRCA sheet steel .The CRCA steel parts shall be powder coated with RAL 7035 powder colour after proper tank chemical treatment Gasketing shall be done properly to prevent any ingress of dust & vermin etc protection for 1/2/3 phase submain as outgoing and including LED indicating lamp as reqd complete as per Techanical specification is given below in all respect. MAKE 27-05-2026-L.K ABB/Schneider.C& S LK TTA 61349 |
| 256 | Incomer |
| 257 | MCCB 400 A 4P 50KA TMR With O/L & S/C Protection-1Nos |
| 258 | Spreader Link MCCB 800A 4P- 1 nos |
| 259 | RHOM Ext.- 1 Nos |
| 260 | Digital metering set ( detail below)Amp. Meter 96x96MM 1No.Volt Meter 96x96MM 1No.Ammeter selector switch 1No.Voltmeterselector switch 1No.Current Transformer 3Nos.phase indicating lamp LED 3Nos.control SP MCB 3Nosterminal Strip 1No |
| 261 | MCCB 250A 4P 36KA TMR With O/L&S/C Protection;- 1Nos |
| 262 | Spreader Link MCCB250 A 4P:- 6Nos |
| 263 | RHOM Ext. |
| 264 | MCCB 200A 4P 36KA TMR With O/L&S/C Protection:- 3Nos |
| 265 | Spreader Link MCCB 200A 4P:- 6Nos |
| 266 | RHOM Ext.:- 3nos |
| 267 | MCCB 160A 4P 36KA TMR With O/L&S/C Protection:- 2Nos |
| 268 | Spreader Link MCCB 125A 4P :- 4Nos |
| 269 | RHOM Ext.;- |
| 270 | MCCB 63A 4P 36KA TMR With O/L&S/C Protection:- 2Nos |
| 271 | Spreader Link MCCB 63A 4P :- 4Nos |
| 272 | RHOM Ext.;- |
| 273 | Fabrication charges of cubical type, indoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized Main L.T. Panel made out of M.S. CRC Sheet 16G/18G,Base Frame 50X50X5mm duly painted with Siemens Grey Powder Coated Paint as per specification approximate Size (H)1900MM X (W)1850mm x (D) 750MM X (L) 450mm :- 1 set |
| 274 | Assembly Charges of 800A 4Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black :- 1set |
| 275 | Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB. &MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkablesleeves of coloured coded Red, Yellow, Blue & Black. AllInterconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables ;- 1set |
| 276 | Control Wiring with Copper Flexible Wire (size of control wireshall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mmor Control Wiring) with thimbles printed sleeves, tie & belt etc.set No-1 |
| 277 | Assembly Charges of Accessories like Neoprene Gasket,Doorlocks, Copper Flexible door earth, legend plates etc.1set |
| 278 | Supplying installation testing & commissioning of SUB PANEL l 200 Amps 440 vlts 36 KA with tinned copper busbar ( TTA 61439 TYPE ) 200A, 4P, 36 kA, with Microprocessor Based with Microprocessor Based Release having Inbuilt O/L, S/C & E/F Protections (Ics=100% Icu), Trip Contact floor mounted main LT Panel Enclosure cubicles designed verified assemblies completely as per IEC 61439 protection having from 3 B construction duly tested with 1K 10 shall be aestheic design dust damp & vermin proof shall be moudular extendable and shall have maintaince friendly construction shall have fully compartmentalized bolted construction shall be metal clad sheet steel enclosed cubicle floor mounting type suitable for indoor installation shall have structural steel frame work as per IEC 61439 part 1 & 2 shall have integral base frame with bottom cable entry having removable glands plates . the panel shall be made out of GI sheet steel & CRCA sheet steel .The CRCA steel parts shall be powder coated with RAL 7035 powder colour after proper tank chemical treatment Gasketing shall be done properly to prevent any ingress of dust & vermin etc protection for 1/2/3 phase submain as outgoing and including LED indicating lamp as reqd complete Techanical speciffication given below in all respect. make :- L.K ABB/Schneider,Schnieder /AE/ESSMA/KAPPA/C&S Selzeer/ L&T |
| 279 | Technical Specification and Material detail of Sub Main Panel |
| 280 | Incomer |
| 281 | MCCB 200A 4P 36KA TMR With O/L&S/C Protection:- 1 Set |
| 282 | Spreader Link MCCB 200A 4P :- 2 set |
| 283 | RHOM Ext.:- 1 set |
| 284 | Digital metering set ( detail below)Amp. Meter 96x96MM 1No.Volt Meter 96x96MM 1No.Ammeter selector switch 1No.Voltmeterselector switch 1No.Current Transformer 3Nos.phase indicating lamp LED 3Nos.control SP MCB 3Nosterminal Strip 1No :- 1set |
| 285 | Outgoing |
| 286 | MCCB 100 A 4P 25 KA TMR With O/L&S/C Protection:- 2Nos |
| 287 | Spreader Link MCCB 160 A 4P:- 4Nos |
| 288 | RHOM Ext.:- 2Nos |
| 289 | MCCB 63 A 4P 25 KA TMR With O/L&S/C Protection:- 2Nos |
| 290 | Spreader Link MCCB 160 A 4P:- 4Nos |
| 291 | RHOM Ext.:- 2Nos |
| 292 | Fabrication/ Painting & Assembly |
| 293 | Fabrication charges of cubical type, indoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized Sub Main Panel made out of M.S. CRC Sheet 16G/18G,Base Frame 40X40X5mm duly painted with Siemens Grey Powder Coated Paint as per specification approximate Size (H)1850MM X (W)1150mm x (D) 450MM X(L)450mm:- 1set |
| 294 | Assembly Charges of 400A 4Strip Copper Busbar (Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black:- 1set |
| 295 | Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB. &MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All nterconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables:- 1set |
| 296 | Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.1 Nos set |
| 297 | Assembly Charges of Accessories like Neoprene Gasket,Doorlocks, Copper Flexible door earth, legend plates etc 1 set MAKE KSB |
| 298 | Supplying installation testing & commissioning of SUB PANEL 100 Amps 440 vlts 36 KA with tinned copper busbar ( TTA 61439 TYPE ) 100A, 4P, 36 kA, with Microprocessor Based with Microprocessor Based Release having Inbuilt O/L, S/C & E/F Protections (Ics=100% Icu), Trip Contact floor mounted main LT Panel Enclosure cubicles designed verified assemblies completely as per IEC 61439 protection having from 3 B construction duly tested with 1K 10 shall be aestheic design dust damp & vermin proof shall be moudular extendable and shall have maintaince friendly construction shall have fully compartmentalized bolted construction shall be metal clad sheet steel enclosed cubicle floor mounting type suitable for indoor installation shall have structural steel frame work as per IEC 61439 part 1 & 2 shall have integral base frame with bottom cable entry having removable glands plates . the panel shall be made out of GI sheet steel & CRCA sheet steel .The CRCA steel parts shall be powder coated with RAL 7035 powder colour after proper tank chemical treatment Gasketing shall be done properly to prevent any ingress of dust & vermin etc protection for 1/2/3 phase submain as outgoing and including LED indicating lamp as reqd complete Techanical speciffication given below in all respect. make :- L.K ABB/Schneider,Schnieder |
| 299 | Technical Specification and Material detail of Sub Main Panel |
| 300 | Incomer |
| 301 | MCCB 100A 4P 25KA TMR With O/L&S/C Protection:- 1 Set |
| 302 | Spreader Link MCCB 100A 4P :- 2 set |
| 303 | RHOM Ext.:- 1 set |
| 304 | Digital metering set ( detail below)Amp. Meter 96x96MM 1No.Volt Meter 96x96MM 1No.Ammeter selector switch 1No.Voltmeterselector switch 1No.Current Transformer 3Nos.phase indicating lamp LED 3Nos.control SP MCB 3Nosterminal Strip 1No :- 1set |
| 305 | Fabrication/ Painting & Assembly |
| 306 | Fabrication charges of cubical type, indoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized Sub Main Panel made out of M.S. CRC Sheet 16G/18G,Base Frame 40X40X5mm duly painted with Siemens Grey Powder Coated Paint as per specification approximate Size (H)1850MM X (W)1150mm x (D) 450MM X(L)450mm:- 1set |
| 307 | Assembly Charges of 400A 4Strip Copper Busbar (Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black:- 1set |
| 308 | Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB. &MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All nterconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables:- 1set |
| 309 | Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.1 Nos set |
| 310 | Assembly Charges of Accessories like Neoprene Gasket,Doorlocks, Copper Flexible door earth, legend plates etc 1 set MAKE KSB |
| 311 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required |
| 312 | Ceiling Fan 1200 mm sweep |
| 313 | Providing and Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, exhaust fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required. Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. |
| 314 | Exhaust fan ,(Plastic body) 250mm sweep |
| 315 | S/E of LED Downlighter surface square with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 316 | Specification of LED fittings: |
| 317 | Wattage of LED fittings As per following parameter. |
| 318 | Lumen output of the fitting as below |
| 319 | Diffuser Polycarbonate diffuser/pmma |
| 320 | Operating voltage 140 V to 270 V, AC supply or better. |
| 321 | Input frequency 50 Hz + 1 Hz |
| 322 | Power factor Minimum 0.90 |
| 323 | Luminaire efficacy >85 lm/w |
| 324 | Color rendering index CRI shall be greater than 80 |
| 325 | Working/ operating temperature 00 to + 450c or better |
| 326 | Color temperature 60000K + 10% |
| 327 | Electronic Driver |
| 328 | Drive current (LED) As per OEM. |
| 329 | Operating voltage 140 V to 270 V AC supply or better |
| 330 | Type of driver Constant current output driver |
| 331 | THD Less than 10% |
| 332 | Surge Protection 2.5 KV minimum |
| 333 | Efficiency Driver>85% |
| 334 | Protection Shall have under voltage and over voltage protection. |
| 335 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 336 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 337 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 338 | Life of LED 50000 burning hours at 70% lumen maintenance |
| 339 | Lumen output of the fitting Rate |
| 340 | LED Down light 18 watt |
| 341 | S/E of LED Downlighter(recess)round type with CRCA/PDC body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 342 | Specification of LED fittings: |
| 343 | Wattage of LED fittings As per following parameter. |
| 344 | Lumen output of the fitting as below |
| 345 | Diffuser Polycarbonate diffuser/pmma |
| 346 | Operating voltage 140 V to 270 V, AC supply or better. |
| 347 | Input frequency 50 Hz + 1 Hz |
| 348 | Power factor Minimum 0.90 |
| 349 | Luminaire efficacy >85 lm/w |
| 350 | Color rendering index CRI shall be greater than 80 |
| 351 | Working/ operating temperature 00 to + 450c or better |
| 352 | Color temperature 60000K + 10% |
| 353 | Electronic Driver |
| 354 | Drive current (LED) As per OEM. |
| 355 | Operating voltage 140 V to 270 V AC supply or better |
| 356 | Type of driver Constant current output driver |
| 357 | THD Less than 10% |
| 358 | Surge Protection 2.5 KV minimum |
| 359 | Efficiency Driver>85% |
| 360 | Protection Shall have under voltage and over voltage protection. |
| 361 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 362 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 363 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 364 | Life of LED 50000 burning hours at 70% lumen maintenance |
| 365 | Lumen output of the fitting Rate |
| 366 | LED 6 watt |
| 367 | S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 368 | Specification of LED fittings: |
| 369 | Wattage of LED fittings As per following parameter. |
| 370 | Total lumens of the fittings. as below |
| 371 | Diffuser Polycarbonate diffuser/PMMA |
| 372 | Operating voltage 140 V to 270 V, AC supply or better. |
| 373 | Input frequency 50 Hz + 1 Hz |
| 374 | Power factor Minimum 0.90 |
| 375 | Luminaire efficacy >100 lm/w |
| 376 | Color rendering index CRI shall be greater than 80 |
| 377 | Working/ operating temperature 00 to + 450c or better |
| 378 | Color temperature 60000K + 10% |
| 379 | Electronic Driver |
| 380 | Drive current (LED) As per OEM. |
| 381 | Operating voltage 140 V to 270 V AC supply or better |
| 382 | Type of driver Constant current output driver |
| 383 | THD Less than 10% |
| 384 | Surge Protection 2.5 KV minimum |
| 385 | Efficiency Driver >85% |
| 386 | Protection Shall have under voltage and over voltage protection. |
| 387 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 388 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 389 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 390 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 391 | (Description) |
| 392 | Lumen output of the fitting Rate |
| 393 | 1000 (One Thousand) |
| 394 | 2000 (Two Thousand) |
| 395 | S/E of LED Panel with PDC body and polycarbonate /Acrylic diffuser to be mounted in recess /surface The job includes carriage, erection, making connections testing and commissioning of the fittings.2 * 2 feet |
| 396 | Specification of LED fittings: |
| 397 | Wattage of LED fittings As per following parameter. |
| 398 | Total lumens of the fittings. as per wattage |
| 399 | Diffuser polycarbonate/acyrlic diffuser UGR <30 |
| 400 | Operating voltage 140 V to 270 V, AC supply or better. |
| 401 | Input frequency 50 Hz + 1 Hz |
| 402 | Power factor Minimum 0.90 |
| 403 | Luminaire efficacy >110 lm/w |
| 404 | Color rendering indexCRI shall be greater than 80 |
| 405 | Working/ operating temperature 00 to + 450c or better |
| 406 | Color temperature 60000K + 10% |
| 407 | Electronic Driver |
| 408 | Drive current (LED)As per OEM. |
| 409 | Operating voltage 140 V to 270 V AC supply or better |
| 410 | Type of driver Constant current output driver |
| 411 | THD Less than 10% |
| 412 | Surge Protection 2.5 KV minimum |
| 413 | Efficiency Driver >85% |
| 414 | ProtectionShall have under voltage and over voltage protection. |
| 415 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 416 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 417 | LED Type/ Make/ ModelPower CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer |
| 418 | Life of LED 50000 burning hours at 70% lumen maintenance |
| 419 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 420 | Armound Cable 6 Sq Twin Core |
| 421 | Armound Cable 35 Sq mm3.5 Core |
| 422 | Armound Cable 50 Sq mm3.5 Core |
| 423 | Armound Cable 70Sq mm3.5 Core |
| 424 | Armound Cable 120q mm3.5 Core |
| 425 | Armound Cable 185q mm3.5 Core |
| 426 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating ,5 star BEE rating and safety valve. installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required . |
| 427 | Gyser 25 Litters |
| 428 | Earthing with G.I.earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. without charcoal/ coke and salt as required. |
| 429 | Earthing with Copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. without charcoal/ coke and salt as required. |
| 430 | Supplying and laying 25 mm X 5 mm Copper strip on surface or in recess for connection etc as required. |
| 431 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as require |
| 432 | Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 433 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 434 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 435 | Supplying and fixing of LED Panel light with motion sensor (PC) IP -65 Lux 100lm/w with contemporary design housing made of die cast aluminium with street optic lenns and glass diffusser for uniform light distribution , complete with all accessories including making connections, testing etc. as required. Philips , Wipro. etc . |
| 436 | Specification of LED fittings: |
| 437 | Wattage of LED fittings As per following parameter. |
| 438 | Total lumens of the fittings. as per wattage |
| 439 | Diffuser polycarbonate/acyrlic diffuser UGR <30 |
| 440 | Operating voltage 140 V to 270 V, AC supply or better. |
| 441 | Input frequency 50 Hz + 1 Hz |
| 442 | Power factor Minimum 0.90 |
| 443 | Luminaire efficacy >110 lm/w |
| 444 | Color rendering indexCRI shall be greater than 80 |
| 445 | Working/ operating temperature 00 to + 450c or better |
| 446 | Color temperature 60000K + 10% |
| 447 | Electronic Driver |
| 448 | Drive current (LED)As per OEM. |
| 449 | Operating voltage 140 V to 270 V AC supply or better |
| 450 | Type of driver Constant current output driver |
| 451 | THD Less than 10% |
| 452 | Surge Protection 2.5 KV minimum |
| 453 | Efficiency Driver >85% |
| 454 | ProtectionShall have under voltage and over voltage protection. |
| 455 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 456 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 457 | LED Type/ Make/ ModelPower CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer |
| 458 | Life of LED 50000 burning hours at 70% lumen maintenance |
| 459 | LED Light 18 watt motion Sensor |
| 460 | Supplying and erection of Hot dip Galvanized Octa Pole 'A' quality of suitable length and dia. top dia 70mm bottom dia 130mm sheet thickness 3 mm baseplate 200x200x12 mm with detachable type single / double arm bracket 42mm OD pipe 1000mm long with suitable sleeve foundation nut bolts 16x450x4 Nos and 16x600x4 Nos The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- Wipro,.Bajaj K-lite , valmount, Utkrash india . Twinkle etc |
| 461 | 5 Meter long Octa Pole A Quality |
| 462 | Supplying and fixing of Hot Galvanised detachable type single Arm Bracket as per cat No VSPB 062 ) Made out of 42mm OD pipe 1000 mm long with suitable sleeve ,nuts bolts & washers etc for Octa Pole 5 mtr long top bracket as complete with connections, testing and commissioning etc. as required. |
| 463 | Supplying and fixing of integral LED Street light fixture IP66 LED Street light with contemporary design housing made of die cast aluminium with street optic lenns and glass diffusser fr uniform light distribution , complete with all accessories including making connections, testing etc. as required Havell , Wipero. Twinkle etc |
| 464 | Specification of LED fittings: |
| 465 | Wattage of LED fittings As per following parameter. |
| 466 | Total lumens of the fittings. as per wattage |
| 467 | Diffuser polycarbonate/acyrlic diffuser UGR <30 |
| 468 | Operating voltage 140 V to 270 V, AC supply or better. |
| 469 | Input frequency 50 Hz + 1 Hz |
| 470 | Power factor Minimum 0.90 |
| 471 | Luminaire efficacy >110 lm/w |
| 472 | Color rendering indexCRI shall be greater than 80 |
| 473 | Working/ operating temperature 00 to + 450c or better |
| 474 | Color temperature 60000K + 10% |
| 475 | Electronic Driver |
| 476 | Drive current (LED)As per OEM. |
| 477 | Operating voltage 140 V to 270 V AC supply or better |
| 478 | Type of driver Constant current output driver |
| 479 | THD Less than 10% |
| 480 | Surge Protection 2.5 KV minimum |
| 481 | Efficiency Driver >85% |
| 482 | ProtectionShall have under voltage and over voltage protection. |
| 483 | Guarantee of LED fittings including LED driver 5 years against manufacturing defect. |
| 484 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 485 | LED Type/ Make/ ModelPower Wipro PhilipsK0lite with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer |
| 486 | Life of LED 50000 burning hours at 70% lumen maintenance |
| 487 | LED 45 watt street light fixture Wipro .philips, K-lite |
| 488 | SITC of 26– Passenger Elevator with Machine Room Gearless MiniSpace™ the following technical specifications: |
| 489 | PRODUCT :GeN3-Stream_MR-1MPS |
| 490 | DETAIL S:GeN3-Stream_MR -1MPS |
| 491 | CAPACITY ( kgs) :1768 Kg, 26 persons. |
| 492 | SPEED (mps):1 |
| 493 | RISE (m) :13 mtr approx |
| 494 | STOPS:4 Stops With (all opening on the same side) |
| 495 | CONTROLLER TYPE :LVA/ACD |
| 496 | DRIVE:VF Regenerative (Closed Loop) |
| 497 | POWER SUPPLY:400/415 Volts (3 Phase AC) |
| 498 | OPERATION :Full collective operation |
| 499 | CAR GROUP:One car (simplex) |
| 500 | MACHINE:PM Gearless |
| 501 | TRACTION MEDIA :Flat Coated Steel Belt |
| 502 | CAR FINISH:Rear Mid Panel = Stainless Steel HoneycombRear Corner Panels = Stainless Steel HoneycombSide Mid Panels = Stainless Steel HoneycombSide Corner Panels = Stainless Steel HoneycombFront Panels = Stainless Steel Honeycomb |
| 503 | FALSE CEILING TYPE:CD41 type false ceiling |
| 504 | FALSE CEILING FINISH:Stainless Steel #4(Hairline) |
| 505 | VENTILILLATION :Cross flow fan |
| 506 | HAND RAILS :Stainless Steel Mirror Finish Handrails on rear car panels |
| 507 | FLOORING :20 mm recess, flooring by owner |
| 508 | CAR DOOR FINISH:Stainless Steel Honeycomb |
| 509 | LANDING DOORS FINISH:Stainless Steel Honeycomb |
| 510 | FIRE RATED DOORS:Fire rating-120mins |
| 511 | PIT DEPTH:1600 |
| 512 | OVERHEAD:4500 |
| 513 | HOISTWAY DIMENSION (WXD-MM):2350 mm W x 3000 mm D |
| 514 | CAR DIMENSION(WXDXH-mm):1600 mm W x 2400 mm D x 2400 mm H |
| 515 | CAR & HOISTWAY DOOR TYPE :Telescopic Opening (TLD) doors |
| 516 | DOOR OPENING (wxh-mm):1200 mm W x 2100 mm H |
| 517 | DOOR OPERATOR:DC Door Operator |
| 518 | COP:FLAT17 COP FOR GEN2 STREAM LITE in Stainless Steel #4(Hairline) |
| 519 | CAR POISTION INDICATOR :Monochrome LCD-Blue Background & White font |
| 520 | HALL FIXTURE :2000 |
| 521 | HALL FIXTURE FACE PLATE:Stainless Steel #4(Hairline) |
| 522 | HALL BUTTON ARRANGEMENT :Hall button with HPI |
| 523 | STANDRAD FEATURES:Anti-nuisance Car Call ProtectionIndependent Service (for Duplex only)Overload DeviceNudgingEmergency Firemen’s ServiceEmergency Car Light UnitInfrared Curtain Door ProtectionDoor Time ProtectionEmergency Alarm ButtonExtra Door Time of Lobby & ParkingDoor Open/Close ButtonManual Rescue OperationBelt Inspection DriveAuto Fan Cut OffAutomatic Rescue Device (in case of power failure) OTIS One IOT |
| 524 | OPTION INCLUDED:Intercom, |
| 525 | The price of complete job as per specifications above shall be inclusive of steel items,minor building work,Scaffolding etc.All sundry fittings,assemblies,accessories,hardware items,foundation bolts,terminal lugs for electrical connections as required and items which are useful and necessary for proper assembly and effcient working of various components shall be deemed to have been included in this job whether such items are specifically mentioned in the tender documents or not.Make:-OTIS,KONE,MITUSBISHI,SCHNEIDER,JOHNSON and Thyssenkrupp and ORBIS or the make as approved by Engineer-in-Charge. |
| 526 | Providing AMC for Lift Under The AMC the Supplier Shall Provide Comprehensive maintenance service of the Lift including the spares and there shall be no hidden cost. AMC must be carries out once in fortnight. During the period of AMC service/reapir calls are to be attended by the Supplier with in Two hours from the time of such calls. The defective equipment should be repaired on the same day at purchasers location. in case of major defect requiring the defective card /item/equipment to be taken to the supplier workshop. it should be returned within a weeks time duly repaired and immediate susbtitute card/item/equipment will be provided by the supplier m for the smooth operation of the lifts.The to and fro transfortation of the cards/item/equipment will be responsiblity of the supplier. Delays in attending the calls and or reparing the defective equipment beyond time limit of one day will attract penalty of ` 500/-day. The bidder will undertake the supplies of necessary Mtc. qeuipment and spare parts will be made available for all the Equipment and the complete system for a period of 10Years on continuing basis with 1st year defect liablity period on free of cost and thereafter for 9 years on paid basis. The bidder shall quote the rates on per year basis. |
| 527 | comperahansive annual maintanance after one year Free service . |
| 528 | 2nd year cost 0f AMC |
| 529 | 3rd year cost 0f AMC |
| 530 | 4Th year cost of AMC |
| 531 | 5th year cost of AMC |
| 532 | 6 th Year cost of AMC |
| 533 | 7 th Year cost of AMC |
| 534 | 8 th Year cost of AMC |
| 535 | 9 th Year cost of AMC |
| 536 | 10 th Year cost of AMC |
| 537 | Supply, Installation, Testing and Commissioning of VRV/ VRF Modular Type outdoor units, equipped with Highly Efficient Scroll, all inverter compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting, refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 49°C ambient temperature, refrigerant R 410A complete in all respect. The manufacturer of ODU and compressor shall be same i.e the make of compressor shall be identicle of the ODU Make:- Daikin, Carrier, LG , Mitsubishi or as approved by Engineer-in-charge. |
| 538 | VRV Outdoor Unit 42 HP. |
| 539 | VRV Outdoor Unit 46 HP. |
| 540 | Supply, Installation, testing and commissioning of cassette type indoor units equipped withl, pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, drain pump, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings, All indoor Units should have force shut option to connect with fire alarm or key card adaptor, so that the unit automatically stops in case of fire or key card removal complete in all respects as required Make:- Daikin, Carrier, LG Mitsubishi or as approved by Engineer-in-charge. |
| 541 | Cassette type 4HP |
| 542 | Cassette type 3.2HP |
| 543 | Cassette type 2.52HP |
| 544 | Cassette type 2HP |
| 545 | Cassette type 1.6HP |
| 546 | Cassette type 1.28HP |
| 547 | Cassette type 1HP |
| 548 | Supply, installation, testing and commissioning of wired control remote suitable for Variable refrigerant flow with Large liquid crystal screen display, Operation start/stop can be programmed using timer for periods up to 72 hours. Thermostat sensor provides room temperature control for optimum comfort. Microcomputer monitors room temperature and preset temperature, automatically selecting cool/ heat operation use any indoor remote controller to select cool, heat, or fan mode without using the main cool/heat selection switch. Continuous monitoring of 40 possible malfunctions with self-diagnosing capability, complete in all repects as required Make:Daikin, Carrier, LG, Mitsubishi or as approved by Engineer-in-charge. |
| 549 | Supply, installation, testing and commissioning of R410A Refrigerant for variable refrigerant flow system complete in all respects with vaccum and pressure testing of copper piping and filling of refrigerant in the copper pipes complete with all necessary connections Make:- Daikin, Carrier, LGor as approved by Engineer-in-charge. |
| 550 | Providing refrigeration joints for indoor units of variable refrigerant flow system, including complete vaccum and pressure testing of copper piping and filling of refrigerant and complete joint of copper piping and the unit, complete in all respects as required Make:- O General, Mitsubishi Electric, Daikin, Carrier or as approved by Engineer-in-charge. |
| 551 | Supplying and fixing of copper piping for flow of refrigerant (R410) or its equivalent between indoor and outdoor unit of VRV system with closed cell elastometric nitrile rubber tubular insulation complete in all respects with laying and connection of piping as required Make:- Mexflow, Airflow, Mandev or as approved by Engineer-in-charge. |
| 552 | 41.30mm dia with 19mm insulation. |
| 553 | 34.90mm dia with 19 mm insulation. |
| 554 | 28.60mm dia with 19mm insulation. |
| 555 | 22.20mm dia with 19mm insulation. |
| 556 | 19.10mm dia with 13mm insulation |
| 557 | 15.80mm dia with 13mm insulation. |
| 558 | 12.70mm dia with 13mm insulation. |
| 559 | 9.50mm dia with 13mm insulation. |
| 560 | 6.40mm dia with 13mm insulation. |
| 561 | Providing and fixing PVC conduit of following sizes with 9mm thick XLPE closed cell nitrile insulations complete in all respects as required with best satisfaction of Engineer-in-charge. |
| 562 | 25mm dia with 9mm insulation. |
| 563 | 32mm dia with 9mm insulation. |
| 564 | Supplying and fixing of control cum transmission copper wiring of 2 core with 1.5 sq.mm dia in PVC conduits for connection between indoor and outdoor units and corded remote units complete in all respects as required with best satisfaction of Engineer-in-charge. |
| 565 | SH:- FIRE ALARM SYSTEM |
| 566 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.Make: Honeywell Notifier, Bosch, Siemens |
| 567 | Two Loop Panel. |
| 568 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 569 | Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.Make: Honeywell Notifier, Bosch, Siemens |
| 570 | Supplying, installation, testing & commissioning of addressable manual call point complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 571 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 572 | Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 573 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 574 | Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 575 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.Make: Honeywell Notifier, Bosch, Siemens |
| 576 | Supplying, laying of Speaker cable 2 Core 1.5 Sqmm complete as required. |
| 577 | Supply, installation, testing and commissioning of 5 MP Dome/Bullet camera, ONVIF profile S & G, UL, CE, FCC Certified, 1/2.9-inch Progressive Scan CMOS, 3.6 to 10 mm motorized varifocal lens, 30 FPS, Quad stream with each stream support H.265, H.264 and MJPEG compression simultaneously, min illumination :Color 0.24 lx, Mono 0.03 lx, With IR 0.0 [email protected], Shutter speed : 1/25[30] to 1/15000 sec, WDR-120DB, Compression : H.265, H.265 MJPEG.SD card support upto 2tb, Alarm trigger - 1 input / 1 output, frame rate : Main stream should support 30 fps@5MP, Edge analytics:Rule based alarms and tracking, Line crossing, Enter / leave field, Follow route, Loitering,Idle / removed object, People counting, Crowd, density estimation, Object Classification, 3D Tracking, In built IR LED, IR Distance upto 30 meters, IP66 and NEMA4X, IK10, POE.Audio - 1 input/1 output, SNR >55 Db, -40 ºC to +50 ºC, 5% to 100% Relative humidity (condensing), Up to 123m (403ft) Object detection range, MTBF > 100,000 Hrs complete etc as required.Make: Honeywell, Bosch, Pelco |
| 578 | Supply of network recorder to a maximum of 64 IP cameras, The recorders can be installed with a maximum of 4 internal HDDs for video storage. Shall Support capacity per HDD minimum 10 TB with Raid 5, E-SATA supported. 16 alarm i/p & 6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265/H. 264/MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certified.Make: Honeywell, Bosch, Pelco |
| 579 | Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk complete etc as required.Make: WD, Seagate |
| 580 | Supplying, installation, testing and commissioning of 55 inch 4K ultra HD LED TV with Display resolution of 3840 x 2160 (UHD) or more, High Dynamic Range, Smart TV (Android/Google) having 3 HDMI ports, 2 USB ports, inbuilt WiFi, LAN port, 20 watt output speakers suitable for 230V, 50Hz, Single phase AC supply along with necessary wall mounted stand with Voice control remote etc.Make: Samsung, LG, Panasonic |
| 581 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.Make: Legrand, Molex, Commrax |
| 582 | RJ 45 CAT 6 socket outlet including modular plateMake: Legrand, Molex, Commrax |
| 583 | Supplying and fixing 1 meter length, UTP Patch cord of Cat 6 cableMake: Legrand, Molex, Commrax |
| 584 | Supplying and fixing 2 meter length, UTP Patch cord of Cat 6 cableMake: Legrand, Molex, Commrax |
| 585 | Supplying and fixing 24 port Patch Panel with tool-less keystone jacks CAT 6A in provided U Rack complete as required.Make: Legrand, Molex, Commrax |
| 586 | Supply, Installation, Testing and Commissioning of 24U floor mounted Rack with inbuilt exhaust fan and all the accessories as required.Make: Legrand, Molex, Commrax |
| 587 | Supply, Installation, Testing and Commissioning of 15 U wall mounted Rack with inbuilt exhaust fan and all the accessories as required.Make: Legrand, Molex, Commrax |
| 588 | Supply installation, testing and Commissioning of (Layer 2) managed POE switch with minimum 24 nos. 10/100/1000 Base-T ports and minimum 195W of POE power and additional 4 nos SFP uplink ports. Switch shall have minimum 56 Gbps switching capacity. Switch should have slot/ports (excluding) uplink for minimum 1 Gbps of stacking bandwidth with dedicated staking ports and cables cables with minimum 4 switch in stack.OEM should give minimum 5 years warranty for the product.Make: Cisco, Arista, Quantum, Juniper, HP |
| 589 | Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.Make. TATA, JINDAL HISSAR. |
| 590 | 25 mm |
| 591 | 32 mm |
| 592 | 40 mm |
| 593 | 50 mm |
| 594 | 65 mm |
| 595 | 80 mm |
| 596 | 100 mm |
| 597 | 150 mm |
| 598 | 200 mm |
| 599 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.Make. Minimax, Atasee, Ceasefire. |
| 600 | Supply, installation, testing & commissioning of single headed Stainless Steel ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with SS cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A')Make. Minimax,Atasee,Ceasfire. |
| 601 | Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with SS male & female instantaneous type coupling (IS 903).Make. Minimax,Atasee,Ceasfire. |
| 602 | Providing & fixing 63 mm dia Gun metal Braneh pipe with SS with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.Make. Minimax,Atasee,Ceasfire. |
| 603 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete as requried. Make. Minimax,Atasee,Ceasfire. |
| 604 | Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect. Make. Minimax,Atasee,Ceasefire. |
| 605 | Four way |
| 606 | Providing Cast iron double flange Butterfly Valve as per ISI PN1.6 rating complete to with Bronze body & wedge stainless steel spindle G land packing,rubber gasketConfirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.Make Sant, Zoloto LP. |
| 607 | 80 mm Dia |
| 608 | 100 mm Dia |
| 609 | 150 mm Dia |
| 610 | Providing and fixing Non return Valve Cast Cast Iron/steel double flanged as per IS/5312 PN 1.6 rating complete with bronze body & wedge stainless steel spindle ,Gland packing, Rubber gasket per table \\"E\\" and specifications complete in all respect.Make Sant, Zoloto LP. |
| 611 | 80 mm dia |
| 612 | 100 mm Dia |
| 613 | 150 mm Dia |
| 614 | supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried. Make. H.Guru.,SystemSensor,Fbig. |
| 615 | SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect. |
| 616 | supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.Make. Zoloto,Sant,LP. |
| 617 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required. |
| 618 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 450 mm in diameter and 2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required. |
| 619 | Supplying installation,testing and commissioning of electric driven main fire pump suitable for aotumatic operation and consisting of following complete in all respect as required. |
| 620 | Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 1620 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.) |
| 621 | Suitable 40 HP SQ cage induction motor TEFC,synchronous speed 1500 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \\"F\\"insulation ,conforming to IS-325.Make Kirloskar ,ABB,Cromption. |
| 622 | M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required. |
| 623 | (D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. |
| 624 | Supply Insllation,testing,and commissioning Jockey pump with 15 HP SQ cage induction motor,TEFC,synchronous speed 1500 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \\"F\\"insulation,conforming to IS-325 for 180 LPM and 56 Metres head conforming to IS 1520 bronze impeller/SSansMechanical seal.MS fabricated common base plate,coupling,coupling guard,CCfoundation etcas requried.Make. Kirloskar,ABB,Cromption. |
| 625 | Supplying installation,testing and commissioning of Diesel Engine driven main fire pump suitable for aotumatic operation and consisting of following complete in all respect as required. |
| 626 | Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 1620 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% of the rated head.) |
| 627 | Suitable 62HP 1500 RPM deesel engine conforming to IS:649/IS:160/IS10002 all amended upto date, countnuous duty, multi cylinders vertical 4 dtroke cycle water cooled, developing suitable operating speed specified to drive the fire pump capable of driving continous non-stop opreation for 8 hours having 10% overload capacity for one hour in a period of 12 hours continuous run ,capacity to accept full load within 15 seconds from the receipt of signal to start and complete with following accessories.Make Kirloskar,ABB,Cromption. |
| 628 | Dynamically balanced fly-wheel. |
| 629 | Direct coupling for pump and coupling guards. |
| 630 | Radiator with hoses .fan water pump,drivearrangement and guards |
| 631 | Air-cleaner dry type |
| 632 | Fuel tank with necessary pipe. |
| 633 | pump for fabricating oil and lubricating oil filter. |
| 634 | Electric starding system alongwith battery 12 V/24 V |
| 635 | Exhaust siliencer (residentail type) with necessary pipe work. |
| 636 | Governor |
| 637 | Instrument panel housing all the gauges including tachometer,hourmeter and starting switch with key (for manual starting) |
| 638 | Necessary safty control and stop solenoid in the event of fault. |
| 639 | Painted in post office red colour. |
| 640 | Common base plate fabricated out of MS channel of suitable size for assembling the pump and the engine fkexble coupling and with couplingguard for protection/safty. |
| 641 | Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required. |
| 642 | Incomer |
| 643 | I ) 250 A, 4 Pole, 50 KA, MCCB withmicriprossor release with Ics=Icu digital Volt meter(0-500 Volts) with selector switch digital Ammeter (0-400 Amps) with in built selector switch and CT's etc. Set of 3 phase LED indicating lamps, set of Al. bus bar for 500 Amps |
| 644 | OUTING |
| 645 | Mains Fire pump. |
| 646 | I ) 125 Amps, 4Pole MCCB, 35/36 KA Ics=100% Icu with suitable 75 HP two no.fully automatic star/delta starter with over load protection, current sebsing type single phase preventor complete with all accessories and internalwiring requried for automatic operation, selector switgh for/ remoute, auto /mannul oFF operation-1sets |
| 647 | ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 648 | iii)Pump on LED Induication Lamp -1 No |
| 649 | b) Jockey pump. |
| 650 | i) 63 Amps. 4P MCCB 25 KA Ics=100% wit hSuitable15 HP two no. fully automatic star/delta starter with over load protection .(without no volt and under voltage trip), current sebsing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote,auto/manual OFF operation-2 set |
| 651 | ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 652 | iii)Pump on LED Induication Lamp -1 No |
| 653 | Diesel Engine Control |
| 654 | Control for Diesel Engine Comprising |
| 655 | Auto/ Manaul selector switch and 3 attempt starting device, timers and relays as requried . Push buttions.start/ stop in manual mode. Indication Lamp for High/Low Lub. Oil pressure, High Water Temp, and Engine ON indication. Battery Charger suitable for 12/24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20 A DC Ammeter . All standard relay and accessories for automatic operation. |
| 656 | d) System Controller |
| 657 | Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification |
| 658 | Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK) Make .Minimax,Atasee, Ceasefire. |
| 659 | 4.5kg |
| 660 | Providing and Fixing 4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make Minimax,atasee,CeaseFire |
| 661 | Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK) .Make. Minimax, Atasee,Ceasefire |
| 662 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size. |
| 663 | Armoured cable 25 sq. mm ( 3.5 core) |
| 664 | Armoured cable 50 sq. mm ( 3.5 core) |
| 665 | Providing fixing,testing and commissioning of 15mmdia chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) Make.Minimax,Atasee, Ceasefire. |
| 666 | Supply, Installation, Testing & commissioning of “Y” type stainer in pump suction line.Make:Sant,Zoloto,Leader. |
| 667 | 80 mm dia |
| 668 | 150 mm dia |
| 669 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. without charcoal/ coke and salt as required. |
| 670 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 671 | Supply and laying 8 SWG copper wire at 0 .50 mtr below ground level for earthing electrode ,including soldering etc. as required. |
| 672 | Supply, installation, Testing and commissioning of wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS: 10221 with 15 mm overlap as per specifications.Make:IWL/Shivam |
| 673 | Supplying installation,testing and commissioning of electric driven Terrace fire pump suitable for aotumatic operation and consisting of following complete in all respect as required. |
| 674 | Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 900 LPM and 35 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.) |
| 675 | Suitable 12.5 HP SQ cage induction motor TEFC,synchronous speed 2900 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \\"F\\"insulation ,conforming to IS-325.Make Kirloskar ,ABB,Cromption. |
| 676 | M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required. |
| 677 | (D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. |
| 678 | Fabrication,Supplying,Insallation,Testing & Commissioning of electrical control panel of cubical construction, floor mounted type fabricated out of 2mm.thick CRCA sheet, compartmentalized with hinged lockable doors,dust and vermin proof,powder coated of approved shade after 7 tank treatment process,cable alley,inter-connection,having switchgears and acccessories mounting and internal wiring,earth terminal,numbering etc.complete in all respect suitable for opreation on 415V ,3 phase,50 Hz .AC supply with encloser protection class IP 55 complete . |
| 679 | A. Pump Panel |
| 680 | (1) INCOMER |
| 681 | (a) 63 Amps TP&N MCCB 16KA with thermal magnetic OiL & S/C protection release. |
| 682 | (b) Voltmeter 0-500V) with selector switch. |
| 683 | ( c) Ammeter 0-100) with selector switch |
| 684 | (d) Set of 3 phase indicating lamp. |
| 685 | (e) Set of AL. Busbar 63 Amp. |
| 686 | OUTGOING |
| 687 | (a) 63 Amps TPN MCB with suitable appox 9.3KW ( for above 900 lpm at 35 mtr head Pump) fully automatic star/delta starter with over load protection,Timer,Contractor current sensing type single phase preventer complete with all accessoriesand inernal wiring. |
| 688 | Providing fixing,testing and commissioning flexible sprinkler hose 25 mm dia chrome, 1 sett rode, 3 clamp, 1 nipple 25mm dia 1500 mm lenght complete as per specification. Sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (1500 mm as per required at site) and including all lead and lift (ISI MARK) Make.Minimax,Atsaee, Ceasefire. |
| 689 | Providing and Fixing UL/FM Listed Powder frinesh Esuitecheon Plate Complete inculding fixing in position on pipe and celling complete in all respect. |
| 690 | Prividing ,Installation, Testing & Commissioning of water flow switch for Sprinkler line,Make Minimax ,ceasefire. |
| 691 | 100 mm dia pipe |
| 692 | Supply Installation Testing & Commissioning of 10KVA/10 KW Online UPS : Three Phase Input & Three Phase Output- Autosensing, True Online UPS with Full Digital Signal Processing (DSP )Technologies with Touch Screen (LCD /LED ) display Panel & Pure Sine Wave O/P . UPS unit shall operate in double conversion mode, it shall be a VFI-type UPS (as per stanard IEC 62040-3).UPS along with same rating Inbuilt K rated Galvanic ISOLATION Transformer of same OEM make only. UPS should be with Latest IGBT Based Rectifier & Inverter Technology. UPS should have minimum 30 minutes backup on SMF Batteries Bank with Minimum VAH = 9000 VAH . along with following features/specifications The job includes the cost of Supply, installation, commissioning and testing charges including rack, connecting and other petty material required to complete the job. Approved Make: APC-Schneider/ Vertiv - Emerson/ Legrand-Numeric Only. |
| 693 | The UPS should have following specification. |
| 694 | INPUT FEATURE : |
| 695 | Input Voltage window 320 VAC - 480 VAC 3 Phase |
| 696 | Input Frequency window 45-55 Hz . |
| 697 | Nominal Frequency 50 Hz |
| 698 | Total Harmonic Current Distortion (THDI ) should be less than 4 % at full rated load |
| 699 | Input power factor (PF) greater than or equal to 0.99 |
| 700 | OUTPUT FEATURE : |
| 701 | Output Power Factor should be unity. |
| 702 | Output Power Capacity in watts (KW) 10KVA / 10KW |
| 703 | Output Voltage - 380 / 400 /415 Volts rms, adjustable via the user interface. |
| 704 | Total Harmonic Distortion : < 4% for linear load & < 5% for 100% non-linear load |
| 705 | Output Frequency range 50/60 HZ. |
| 706 | Other Features |
| 707 | UPS overall Efficiency : upto 93% ( AC to AC i.e Online Mode) and 98% ( Eco Mode ) without Isolation transformer losses |
| 708 | Overload Capacity: A) 10 minutes at a load representing 125% ,B) 60 second at a load representing 150% |
| 709 | Parallel option : Parallel option upto 4 Units should be available |
| 710 | Bypass : UPS Should Be built in Manual and Maintenance Bypass feature |
| 711 | Operating Temperature : 40 degree C |
| 712 | Noise Level :Less than 65 dBA |
| 713 | Emergency Power Off (EPO) Should be available as standard |
| 714 | Protection requried :TVSS inbuilt ,over volatage,short circuit ,overload at UPS O/p and Under Voltage at battery terminal,input phase sequence protection feature,with dust filters and inbuilt TVSS device for surge protection. |
| 715 | UPS should has feature of common battery bank up to at least 2 units. |
| 716 | Isolation :UPS Should be with same OEM make inbuilt Isolation Transformer at Input side. |
| 717 | Communications & Management :- |
| 718 | Interface ports : USB/ RS 232 & optional SNMP . |
| 719 | Touch Screen LCD Display and LED indicators |
| 720 | Alarms : Audible Alarm required for Mains failure, Low Battery, Inverter Trip, Over Temperature, Over Load |
| 721 | Safty Standard & Certifications and Test reports |
| 722 | ISO 9001 & 14001,45001 certified OEM ,Safety Standard: IEC62040-1, EMC: IEC62040-2, Performance IEC62040-3 , along with CE/UE certification. Product should be ROHS / PEP & REACH certified And IP20 Protection ,Quoted model should be tested by SAMEER/ERTL/NTH or any Govt. approved NABL Accredited Lab. Bidder to submit the type test report from any Govt. LAB /NABL accredited LAB in supporting to above technical parameters. |
| 723 | Warranty Terms : Three Years on UPS & Three Years on Batteries onsite service Support |
| 724 | Approved Make : APC- Schneider / Vertiv -Emerson/Legrand-Numeric Only for UPS & Exide, Quanta & Panasonic for SMF Batteries. . |
| 725 | SERVICE & Support : OEM should have 3-4 own /ASP based registerted service centers in the state for better & timely service support, need to share at least 2 engineers contact details with service center address details in the region of installation and OEM Turnover should not be less than 500 Crores/year in last 3 financial years with profitability. 10 years presence of OEM in Govt. project segment And Quoted product should be available on OEM Website with as per asked technical specifications |
| 726 | Battery Bank : UPS unit shall be equipped with its independent battery bank of the following: |
| 727 | VRLA type, mounted on a rack with a design life of 3 yrs as per OEM , Sealed Maintenance Free - Lead Acid Battery with suspended Electrolyte (Leak Proof)The battery shall be sized to ensure continuity in the supply to the inverter for 30 minutes for a power rating of 10KVA at full rated load & 1.7 ECV. |
| 728 | Battery Type : DC Voltage Bus with Flexibility of at least 4-6 no. of Batteries , Min. 30 Mins Backup , 12V Batteries will be provided by firm Minimum required VAH per UPS =9000 VAH. |
| 729 | DC Battery Breaker : For safe maintenance on the battery of UPS unit, the system shall include a circuit breaker to isolate the battery from the corresponding rectifier /charger and inverter. When the battery is isolated from the system, the UPS shall continue to supply the load without interrup-tion or disturbance, except in the event of a normal AC source outage. |
| 730 | Battery Rack & Links - Racks Suitable for Mounting the All Batteries each Sheet Metal Type along with interconnection cables and 5/7 meter wire from UPS to battery bank. |
| 731 | Battery Make : Quanta / Exide/Panasonic make only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender