Tender For Building : Construction Of Proposed Higher Secondary (+2 Arts Stream) Under Stars At Madhabanandajew Govt. Higher Secondary School, Madhab In The District Of Cuttack For The Year 2026-27
Tender Value
1.24 Crore
Estimated cost
Bid Submission
22 Sep 2026
9 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Building : Construction Of Proposed Higher Secondary (+2 Arts Stream) Under Stars At Madhabanandajew Govt. Higher Secondary School, Madhab In The District Of Cuttack For The Year 2026-27
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | date corrigendum | Date | 22-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in all kinds of soil including earth mixed with boulder (except sheet rocks and boulder requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour ,T&P and dewatering if required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 2 | Supplying filling in foundation and plinth with sand in layers not exceeding 22.5cm (9\\") thick including watering and ramming with cost conveyance, royalities, taxes of the materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (1 ½\\") size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6\\") thick to the required level ramming watering and curring etc. complete including cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete including dewatering if required as per specification and direction of the Engineer-in-Charge. |
| 4 | Fly ash brick masonary in cement mortar (1:6) in foundation and plinth and basements and ornamental floor bed plinth moulding and similar such types of works with all necessary projections using fly ash bricks of 9\\"/10\\" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalities, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Fly. brick masonary in cement mortar (1:6) in superstructure using Fly. bricks of 9\\"/10\\" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalities, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 6 | R.C.C. M-25 with minimum compressive strength in work test of 150kg/cm2 in 15cm cubes at 28 days using 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete and compacting by using vibrator watering and curing for 4 weeks centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. complete excluding cost and conveyance of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and labour charges for straightening cutting bending etc. of the M.S. Rods or tor steel and tying the grills and placing in proper position as per specification and direction of the Engineer-in-Charge.a). Column Base Footing |
| 7 | b). Plinth Beam / Grade Beam |
| 8 | c). Lintel,Wall Beam |
| 9 | e). Chajja |
| 10 | d). Roof Slab |
| 11 | e). Column |
| 12 | e). Stair Case |
| 13 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only). |
| 14 | 12mm (1/2\\") thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 15 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 16 | 12mm (1/2\\") thick cement plaster (1:4) finished smooth with neat cement punning to dados and skirting including watering and curring with cost , conveyance, royalty and taxes of all materials labour with T&P required for the work etc. complete in all respect, as per specification and direction of the Engineer-in-Charge. |
| 17 | 2.5 cm thick artificial stone flooring with cement concrete ( 1:2:4 ) including punning using 12mm size h.g. chips laid to proper slope hoisting lowering compacting watering curing with cost carriage royalty etc. complete. |
| 18 | 12mm (1/2\\") thick cement plaster (1:4) finished smooth with neat cement punning to dados and skirting including watering and curring with cost , conveyance, royalty and taxes of all materials labour with T&P required for the work etc. complete in all respect, as per specification and direction of the Engineer-in-Charge. |
| 19 | Fixing Chequired tiles of in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with cost carriage royalty of all materials etc. complete. |
| 20 | Providing and fixing ISI marked 35 mm thick flush door shutters confonning to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete. Ref-SR-2022, Page 236, Sl No-8 |
| 21 | Supplying, fitting and fixing of dressed seasoned sal wood work framed and fixed (wrought & putup) in trusses, purlins, frames, rafters, doors, windows, ventilators and beams including cost, conveyance, taxes with all labour, T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 22 | Cement washing one coat with cement to new work including scaffolding staging charges with cost, conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 23 | Finishing walls with weather coat two coats over a coat of primer of approved shade on new work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge. |
| 24 | Wall painting two coats with plastic emulsion paint of approved shade to give an even shade over a coat of priming including cost conveyance of all materials labour T & P etc. complete. |
| 25 | Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure and wood work in proper position etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 26 | Painting two coats with any approved enamel paint to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 27 | Supplying fitting and fixing up window ( sliding type ) made of aluminium section 151-154 ,151-155as window frame section no.151-155 as shutter frame wuth 5 mm thick black glass as pannel fitted with rubber beading etc complete. |
| 28 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 29 | 20mm(3/4\\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brush laid to proper slope finished smooth to receive tarfelt treatment watering and curring including cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 30 | StaircaseK.B. brick masonary in cement mortar (1:6) in superstructure using K.B. bricks of 9\\"/10\\" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalities, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 31 | R.C.C. M-25 with minimum compressive strength in work test of 150kg/cm2 in 15cm cubes at 28 days using 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete and compacting by using vibrator watering and curing for 4 weeks centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. complete excluding cost and conveyance of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and labour charges for straightening cutting bending etc. of the M.S. Rods or tor steel and tying the grills and placing in proper position as per specification and direction of the Engineer-in-Charge. A) Lintel |
| 32 | B ) Chajja. |
| 33 | C) Roof slab. |
| 34 | D ) Column |
| 35 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only). |
| 36 | 12mm (1/2\\") thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 37 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 38 | Cement washing one coat with cement to new work including scaffolding staging charges with cost, conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 39 | Finishing walls with weather coat over a coat of primer of approved shade on new work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge. |
| 40 | Wall painting two coats with plastic emulsion paint of approved shade to give an even shade over a coat of priming including cost conveyance of all materials labour T & P etc. complete. |
| 41 | Finishing walls surface with Synthetic putty of approve make and finished smooth and even surface to receive painting incuding scafolding cost conveyance of all materials labour T & P etc. complete. |
| 42 | Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure and wood work in proper position etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 43 | Painting two coats with any enamel paint over a coat of primer to new wood or iron works including cost conveyance of all materials labour T & p etc. complete. |
| 44 | Supplying fitting and fixing up window ( sliding type ) made of aluminium section 151-154 ,151-155as window frame section no.151-155 as shutter frame wuth 5 mm thick black glass as pannel fitted with rubber beading etc complete. |
| 45 | 20mm(3/4\\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brush laid to proper slope finished smooth to receive tarfelt treatment watering and curring including cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 46 | P.H. WorkSupplying all materials, labour,T & P and providing fixing glazed ceramic tiles in floor, threads, landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc all complete as per specification and direction of EIC. |
| 47 | Supplying all materials,labour, T&P and providing fixing glazed tiles in dados skirting and rises of steps on 25mm thick cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc all complete as per specification and direction of EIC. |
| 48 | Supplying all materials, labour, T&P and fitting and fixing U-PVC(4Kgf/Cm2) SWR soil waste ventilating pipes and fitting of the following O.D.conforming to ISI No.13592 / 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non -heat application method / as per manufactures specification testing including in excavation in all kinds of soils and fefilling of trenches as per direction of EIC.a)110 mm dia SWR U-PVC pipe |
| 49 | b)110mm dia U-PVC door tee |
| 50 | c)110mm dia U-PVC P' Trap |
| 51 | d)110mm dia U-PVC offest |
| 52 | e)110mm dia U-PVC cowl |
| 53 | f) 110mm dia U-PVC plain shoe bend |
| 54 | g)110mm dia U-PVC Plain Bend |
| 55 | h)110mm U-PVC D/Jn with door |
| 56 | i)110mm dia U-PVC Door Bend |
| 57 | j) 75 mm dia U-PVC pipe (4Kgf/Cm2) |
| 58 | k) 75mm U-PVC plain bend |
| 59 | l) 75mm U-PVC SWR door bend |
| 60 | m) 75mm U-PVC SWR door Tee |
| 61 | n)75mm U-PVC SWR Plain Tee |
| 62 | o)75mm U-PVC SWR Vent Cwol |
| 63 | p) 160 mm dia SWR U-PVC pipe |
| 64 | Supplying all materials,labour, T& P and fixing water closet, squatting pan (Indian type W.C.pan / Orissa pan) duly embedded in C.C.(1:5:10) using 4cm h.g. metal all complete as per direction of EIC. ( Parryware)a)580mm Orissa pan |
| 65 | b)EWC with P' & S' Trap with |
| 66 | Supplying all materials, labour, T&P and fitting and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements, 15mm nominal size brass / pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia c.p.flush bend, 15mmdia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. ( Parryware)a)10 liter pvc cistern |
| 67 | Supplying all materials, labour, T&P and cutting holes for taking H.C.I./ PVC pipe and fitting including making good the damages etc. all complete as per direction of EIC.a)125mm to 375mm thick brick masonary wall |
| 68 | Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar taps with C.I. / M. S. brackets painted white including holes in walls and making good the damages etc. all complete as per specification and direction of EIC.(Parryware )a)( 550 x 400 )mm W.H.B. with brackets with fittings |
| 69 | Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.(Parryware make)a) (660 x 400) mm W.H.B. with brackets with fittings |
| 70 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet of plywood sheet and fixing towooden plugs with c.p.screws and washers complete as per specification and direction of EIC.a)( 600 x400 )mm B.E. Mirror |
| 71 | Supplying all materials , labour , T&P and fixing standard size c.p. glass shelf and fix to wooden plugs with c.p. screws complete as per specification and direction of EIC.a) ( 600 x 120 )mm Acraylic shelf with guard rails |
| 72 | Supplying all materials , labour , T&P and fixing standard size c.p. towel rail and c.p. towel ring complete with c.p. brass bracketes fixed to wooden plugs with c.p. screws complete as per specification and direction of EIC.a) ( 20 x 600 )mm long c.p. towel rail |
| 73 | b) c.p. towel ring |
| 74 | Supplying all materials, labour, T&P and fixing standard size c.p. soap holder complete with c.p. brass brackets, fixed to wooden plugs with c.p. screws complete as per specification and direction of EIC.a) C.P. soap Holder |
| 75 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.(Parryware make)a) Flat back lipped wall urinal (380x580x350) |
| 76 | b) 15mm dia urinal spreader |
| 77 | Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.Ca) Fixing of Marble Partition in Urinal |
| 78 | Grab bar 692 mm long (WAC - SAP - BR 0600CS ) |
| 79 | Grab bar vertical Swing (WAC - SAP - BG 0800CS ) |
| 80 | S.D. PORTIONSupplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c(1:1.5:3) using 12mm size h.g. chips, foundation concrete (1:3:6) using 40mm size thick h.g.metal on bed and arround trap, K.B. brick in c.m.(1:6) in foundation and plinth and inside 12mm thick c.p. (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I. gully trap and grating etc. all complete as per approved drawing specification and direction of EIC. a) Inside size ( 250 x 250 )mm |
| 81 | Supplying all materials , labour , T&P and costructing inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size h.g. metal on bed. 1st class K.B. brick work in cm(1:6), moulding and shaping the channel inside and benching with c.c.(1:1.5:3) using 12mm size h.g. chips, 12mm thick c.p.(1:3) with punning to inside, ciment flush pointing (1:3) to outside, R.C.C. cover slab in c.c.(1:1.5:3) using 12mm size h.g. chios with R.C.C. manhole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site,payment of royality, taxes etc all complete as per approved specification and direction of EIC.a) Inside size ( 760 x 760 x 460 )mm |
| 82 | Supplying all materials,labour, T&P and laying PVC pipe sewer line in trenches ( to level or slope) and jointing with gasket and stiff mixture of c.m.(1:1), c.c.(1:3:6) with 40mm size h.g.metal on bed of the trench and hunching or allround concrete encasing with c.c.(1:4:8) using 40mm size h.g.metal including watering, curing, conveyance of all materials to site , payment of royality, taxes etc. and testing all complete as per approved drawing specification and direction of EIC.a) 110mm dia with allround encasing |
| 83 | b) 160mm dia with allround encasing |
| 84 | Supplying all matirials,labour, T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B. brick work in c.m.(1:6) for the remaining height at top, 12mm thick c.p.(1:4) inside and outside over masonary brick work, gravel packing in the rear of well steining R.C.C. cover slab in c.c. (1:1.5:3) using 12mm size h.g. chips , fitted irion lifting handles including earth work in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works , watering, curing, conveyance of all materials to site , payment of toyality, taxes etc. and testing all complete as per approved drawing specification and direction of EIC.a) 1.20m dia x 2.00m deep |
| 85 | b) Construction of RCC Ring Soak way Pit (0.91 m dia x 2.10m |
| 86 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber |
| 87 | SEPTIC TANK ( 50 Users ) (Inside size 4.0m x1.40mx 3.0m)Earth work in all kinds of soill in excavation of foundation trenches within 50mm initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of EIC.i) Initial lift upto 1.50m |
| 88 | ii) From 1.50m to 3.00m depth |
| 89 | Supplying all materials, labour, T&P and filling foundation and plinth with river sand, well watered and rammed including conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of EIC. |
| 90 | Supplying all materials, labour, T&P and provinding c.c.(1:3:6) using 4cm h.g. metal including watering, curing, conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per specification and direction of EIC. |
| 91 | Supplying all materials, labour, T&P and providing c.c.(1:1.5:3) using 12mm size h.g. chips includig watering,curing, conveyance of all materials to work site, payment of royality, taxes etc. all compdete as per specification and direction of EIC. |
| 92 | Supplying all materials, labour, T&P and providing 1st class brick work with K.B. brick having c.s. not less than 75kg/cm2 with dimensional tolerance +/- 8% in C.M. including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of EIC. i) In foundatiion and plinth in C.M. (1:4) |
| 93 | ii) In Superstructure in C:M(1:6) |
| 94 | Supplying all materials, labour, T&P and providing cement plaster on brick / stone work including watering, curing, conveyance all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of EIC.a) 20 mm thick in C.M. ( 1:3 ) |
| 95 | Supplying all materials, labour, T&P and providing cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of EIC.a) Same as item 20mm thick C.P. ( 1: 3 ) |
| 96 | Supplying all materials, labour, T&P and providing rigid and smooth, centering and shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of EIC. |
| 97 | Supplying all materials, labour, T&P and providing M.S. reinforcment for R.C.C. works including cutting, bending, binding and tying the grills and placing in position inluding cot of binding wire 18 to12 gauge, conveyance of all the materials work site, payment of royality, taxes etc. all complete as per specification and direction of EIC. |
| 98 | Supplying all materials, labour, T&P and providing c.c.(1:1.5:3) using 12mm size h.g.chips for R.C.C. works including hoisting, laying, watering, curing, conveyanceo of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of EIC. |
| 99 | Supplying all materials, labour, T&P and fixing M.S. step iron in 20mm dia M.S. steel bar and fixing into walls of septic tank duly embedded in c.c.(1:2:4) all complete as per specification and direction of EIC. |
| 100 | Supplying all materials, labour, T&P and fixing of R.C.C. baffle wall precast with c.c.(1:1.5:3) using 12mm size b.h.g. chips and fitted to septic tank as per specification and direction of EIC. |
| 101 | Supplying all materials, labour, T&P and fixing of R.C.C. baffle wall precast with c.c.(1:1.5:3) using 12mm size b.h.g. chips and fitted to septic tank as per specification and direction of EIC. |
| 102 | Supplying all materials, labour, T&P and providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of EIC. |
| 103 | Filling in foundation and plinth with excavated materials, including watering and ramming as per direction of EIC. |
| 104 | Supplying all materials, labour, T&P and fitting and fixing of Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter etc all complete as per specification and direction of the E.I.C i) Shutter |
| 105 | Supplying all materials, labour, T&P and fitting and fixing of Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C ii) Frame |
| 106 | WATER SUPPLYSupplying all materials, labour, T&P and Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. a) 20mm dia CPVC pipe ( Internal ) |
| 107 | b) 25mm dia CPVC pipe( Internal ) |
| 108 | c) 25mm dia CPVC pipe( External ) |
| 109 | Supplying all materials, labour, T&P and cutting hole through brick/stone masonary wall for taking water supply pipes and fittings including making good the damages etc all complete as per P.H. specification and direction of Engineer in charge.a) 250 mm thick wall ( G. Floor ) |
| 110 | Supplying all materials, labour, T&P and cutting hole through RCC walls, floors, roofs for taking water supply pipes and fittings including making good the damages etc all complete as per P.H. specification and direction of Engineer in charge.a) Ground Floor |
| 111 | Supplying all materials, labour, T&P and fitting and fixing brass / c.p. fitting of the following nominal bore with supply of all jointing materials etc. complete as per specification and direction of EIC. (Jaguar, ) 15mm dia c.p. Pillar cock |
| 112 | 15mm dia c.p. Bib cock( Short body ) |
| 113 | 15mm dia c.p. Two way angle/ Bib cock |
| 114 | 15mm dia c.p. Bib cock ( Long body ) |
| 115 | 15mm dia c.p. Angle stop cock |
| 116 | 15mm dia C.P. Flange |
| 117 | 15mm dia C.P. Extension piece |
| 118 | 125mm dia C.P. Grating |
| 119 | 125mm dia C.P. Health Fuccet |
| 120 | 25mm dia U-PVC Ball Valve |
| 121 | 32 mm dia U-PVC Ball Valve |
| 122 | Supplying all materials, labour, T&P and providing ,fixing rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and jams nuts, fixing ball valve etc. including hoisting upto a height of 5 meter above ground level and placing the tank to the required position including laying, conveyance of all materials to worksite,payment of royality, taxes etc. all complete as per specification and direction of EIC.a) 2000 ltr capacity water storage tank (Ground Floor roof) |
| 123 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a)2000 ltr capacity water tank Staging (Ground Floor roof) |
| 124 | SUBMERSIBLE PUMP ( 1 H.P. )Supplying of I.S.I. mark 1.00 H.P. single phase vertical Submersible pump set with discharge of 1800 - 2200 ltr / hour and a head of 45 - 60 mtr of reputed make like KSB/Texmo and equivalent including all cost, conveyance and taxes etc all complete as per direction of EIC. |
| 125 | Supplying all labour , T&P and fitting & fixing of 1.00 H.P. single phase vertical Submersible Pump set with commissioning and testing etc all complete as per direction of Engineer -in-charge . |
| 126 | Supplying and fitting & fixing of I.S.I. mark D.O.L. starter of reputed make like BCH or equivalent for 1.00 H.P. single phase submersible pump including all cost, conveyance and taxes etc all complete as per direction of EIC. |
| 127 | Supplying and fitting & fixing of three core flat cable (1.5mm2) of I.S.I. make of reputed company like BCH / Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per direction of EIC. |
| 128 | Supplying and fitting & fixing of plastic rope , M.S. well cover, M.S. clamps , Stainless steel short piece, bend and socket including all cost, conveyance and taxes etc all complete as per direction of EIC. |
| 129 | Supplying all materials, labour, T&P and fitting and fixing of HDPE pipe and pipe fittings with making connection to pump set including cost coveyance and taxes etc. all complete as per direction of Engineer incharge.a) 32mm Outer dia H.D.P.E. Pipe |
| 130 | TUBE WELL ( 125 X 100 )mm sizeSupplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.Setting for depths from 0 mtr to 100 mtr |
| 131 | Supplying all materials labour T&P and transportation of boring pipe, top casing grouting pipe, PVC pipe and fitting pvc well screens, cement bentonite and gdravels etc from sectional store to the site and return of departmental material after use including loading and unloading etc. all complete as per dir of EIC. (Current schedule of rate) |
| 132 | Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC |
| 133 | Supplying all labour Tools and plant and plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing thebore by means of pipe cylinder etc. all complete as per direction of EIC.Reaming from 100mm to 150mm dia, 0mtr to 360mtr |
| 134 | Reaming from 150mm to 200mm dia, 0mtr to 360mtr |
| 135 | Reaming from 200mm to 250mm dia, 0mtr to 360mtr |
| 136 | Supplying all labour, tools and plant and jointing materials and lowering the 300 mm dia top casing pipes into the position and removing the same after use all complete as per direction ofEIC. |
| 137 | Supplying all labour tools and plant and jointing materils and lowering the pvc casing pipes, fittings and well screens in jposition, including fitting and fixing of centraliser cutter plug and washing the bore etc. complete as per the direction of EIC. Lowering 125mm dia pvc casing & Strainer pipe |
| 138 | Cost of 125mm dia 80Sch PVC Pipe |
| 139 | Cost of 125mm dia PVC Strainer pipe |
| 140 | Plugcutter |
| 141 | Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 125mm dia pvc casing pipe etc. all complete as per the direction of EIC excluding the cost of cement. |
| 142 | Supplying all labour, tools and plant and packing the bore with washed dgravel (size P-6) around the pipes in good quality excluding cost of gravel etc. all complete as per the direction of EIC. |
| 143 | Labour charges |
| 144 | Supplying all labour tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3mtr of 125/100mm dia pvc casing pipe properly as per the direction of EIC (excluding the cost of cement) |
| 145 | Labour charges |
| 146 | Supplying all labour, tools and plant and materials for cealing and developing the tube well with compressor continously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of EIC |
| 147 | Labour Charges |
| 148 | Supplying all materials , labour , T&P and providing , fitting and fixing of I. M - II hand pump complete with accessories and along with 8nos of riser pipes of 32mm dia nominal bore hot dip galvanised screwed and socked, fitted with socked made of seamless or machine from solid bar socked fitted at one end and thread protector at the other end with 8nos of 12mm dia connecting rod made of bright bar electrogalvanised fitted with coupler and fitted with stand assembly suitable for use in bore well etc all complete as per direction of EIC. |
| 149 | Supplying all materials, labour, T&P and construction of drain as per UNICEF etc all complete as per specification and direction of EIC. |
| 150 | E.I. WorksRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 151 | -do- Group B |
| 152 | -do- Group C |
| 153 | -do- Group B |
| 154 | -do- Group C |
| 155 | Recessed wiring to Exhaust Fan Point in -do- Group B |
| 156 | -do- Group C |
| 157 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 158 | S/F of Angle holder replacing Ceilling Rose |
| 159 | Swich BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 160 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 161 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch of complete with wiring on 12 modular M.S. box with modular cover. |
| 162 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 163 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. a). 2 Modular box with base & cover |
| 164 | b) 12 Modular box with base & cover |
| 165 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) a). 2x1.5+1x1.5 (1.8.1) |
| 166 | b). 2x2.5+1x1.5 (1.8.2) |
| 167 | c). 4x4+2x2.5(1:8:9) |
| 168 | d). Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 169 | Circuit BreakersS/F of 'C' series SP MCB of 6/10A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 170 | S/F of 'C' series 4P MCB of 32Amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 171 | S/F of 12 Way SPN Double Door Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 172 | EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 173 | Supply & laying 6 SWG Cu wire in recess for loop earthing as required (3.18) |
| 174 | FittingsSupply and fixing of 230mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 9\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 175 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic) |
| 176 | Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo ) |
| 177 | S/F step type modular fan regulator |
| 178 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 179 | S/F of 2000VA/24V Invertor machine with 2 nos 180Ah tall tubular Battery including Trolly (Make-Luminous /microtek/v-guard) |
| 180 | CablesProvision of Armoured cable size 4x10sqmm (38) |
| 181 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 182 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 183 | PanelsSupply & fixing of 63 A TPN Panel board 1. 63A MCCB (Make : Legrand / Hager / Scheider / Seimens) 1No.2. 16 A DP MCB (Make : Legrand / Hager / Scheider / Seimens)- 2no 3. TPN Busbar-2set with DC Gland for 25mmsq aluminium armoured cable and 4Pole Spreaders link (63A-200A)4. 63Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 184 | Area lightingsSupply of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable. Make : - Utkarsh/RR Ispat/Vakrangee) |
| 185 | Supply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (Make:Panasonic/Havells/Crompton/Philips/Wipro) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender