Tender For Comprehensive Maintenance Such As Periodical Services, Joinery, Plumbing, Masonary Including Misc Repair Works Of Md Accn, Otm And Mes Installation At Icg Gopalpur Under Ge (I) (Cg) Bhubaneswar(I) (Cg) Bhubaneswar
Tender Value
14.50 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
7 days left
EMD
29000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Such As Periodical Services, Joinery, Plumbing, Masonary Including Misc Repair Works Of Md Accn, Otm And Mes Installation At Icg Gopalpur Under Ge (I) (Cg) Bhubaneswar(I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for as directed. |
| 2 | Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc. comlete all as specified and directed. |
| 3 | M&L PCC Type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified & directed. |
| 4 | M&L PCC Type B0, 1:2:4 (12.5mm graded aggregate) in copings/Bed plate complete all as specified & directed. |
| 5 | M&L for providing precast cement concrete, type B1 1:2:4 (20mm graded aggregated) in landings, cover slabs (for manholes etc.), shelves and similar articles with plane faces and joints to be matched with setting in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 8 | M&L for brickwork with old size fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM in 1:6 complete all as specified and directed. |
| 9 | M&L rendering along with finishing even and smooth 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified & directed. |
| 10 | M&L for extra for forming fair finished drain or channel 60 cm inner girth of cement concrete surfaces using extra cement, including forms, moulds mitred/stopped ends etc complete all as specified and directed. |
| 11 | Dismantling portion of stone/boulder masonry, laid dry etc. complete all as specified and directed. |
| 12 | Labour only for fixing old stone/boulders for boulder pitching, laid dry, hand packed tightly and pitching is grouted with cement and sand mortar 1:6 complete all as specified and directed.(Note : Stone/boulders retrieved from ser item no. 11 here-in-before, are reused for boulder pitching) |
| 13 | Taking down chowkats or frames with shutters not exceeding 1.50 Sqm each (w/o taking off shutters from the frames) and removing from site etc. complete all as specified and directed. |
| 14 | Taking down chowkats or frames with double shutters exceeding 1.50 Sqm but not exceeding 4.00 Sqm each (w/o taking off shutters from the frames) and removing from site etc. complete all as specified and directed. |
| 15 | M&L Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc. all as specified and directed. |
| 16 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 17 | S&F for 35mm thick Glazed and skeleton shutters,of 2nd class hard wood, open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc. complete all as specified and directed. |
| 18 | S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 19 | S&F 100mm butt hinges, heavy weight, cold rolled mild steel and fixed propely in correct alignment with necessary screws complete all as specified & directed. |
| 20 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed including necessary screws and fixing arrangements complete all as specified and directed. |
| 21 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised including necessary screws complete all as specified and directed. |
| 22 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 23 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 24 | S&F in repairs door closer aluminium (extruded section Body) hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed propely in correct alignment with necessary screws complete all as specified & directed. |
| 25 | S&F in repairs curtain rails of anodised aluminium alloy with fixing brackets, stops, rollers etc. with necessary screws complete all as specified & directed. |
| 26 | S&F in repairs mortice lock of brass body with two levers (vertical type), size 100 mm and fixed with necessary screws complete all as specified & directed. |
| 27 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed with necessary screws complete all as specified & directed. |
| 28 | S&F in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 29 | S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete as specified and directed. |
| 30 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 31 | S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note:- Glass pane to be measured and paid separatly) |
| 32 | S&F figured glass, pinhead type glass 4.0mm thick in square not exceeding 0.5 Sqm each pane etc. complete all as specified. |
| 33 | M&L for petty repairs to make the existing aluminium sliding window functional, area excceding 1.00 Sqm but not exceeding 2.00 Sqm, with including taking down the shutters carefully form frame and refixing at the same place/opening after replacing rubber neoprene packing, joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, rollers, etc. with new as per the requirement to make the sliding window functional, complete all as specified and directed. Rate includes both material & labour for making functional of one number existing aluminium sliding window complete, of any number of track, with including replacement of rubber neoprene packing, joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, rollers, etc. as directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 35 | M&L for rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W (Gde E- 250) quality- A with including scaffolding up to any height complete all as specifed and directed. |
| 36 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings upto 20 mtr height complete all as specified and directed. |
| 37 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. at site with including scaffolding up to any height as directed. |
| 38 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws upto 20 mtr height including necessary scaffolding/ hydra machine as required at site complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 40 | M&L for double charged virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incluiding Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 41 | M&L for non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incluiding Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 42 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incluiding Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 for fixing of Tiles complete all as specified and directed. |
| 43 | M&L Granite 18-20mm thick (of any Colour any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incluiding rendering 15mm thick in CM 1:4 complete all as specified and directed. |
| 44 | Taking down cement plaster on brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 45 | M & L for rendering 10 mm thick in CM 1:6 on on fair faces of brick/concrete wall surfaces of any description and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 46 | M & L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick/ concrete wall surfaces of any description and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 47 | M&L for praparation of new plastered surface of wall of any description applying 2mm thick wall care putty over alkali resistant priming paint over two coat of Oil bound distemper complete all as specified and directed. |
| 48 | M&L for preapartion of new plastered or unplastered surfaces of wall surfaces and applying two coats of cement base paint, white or tinted, over and including one coat of alkali resistant priming paint including all necessary scaffoldings etc. upto 4th storeys buildings complete all as specified and directed. |
| 49 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white washing on ceilings complete all as specified and directed. |
| 50 | M&L for preparation of old painted surfaces of wall and applying one coats of Oil bound distemper on walls complete all as specified and directed |
| 51 | M&L for complete removal of existing treatment on walls and applying wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and one coat of alkali resistant primer paint and two coat of oil bound distemper on walls etc complete all as specified and directed. |
| 52 | M&L for preapartion of old plastered or unplastered of wall with washing, rubbing down and stopping of painted surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces including all necessary scaffoldings etc. complete all as specified and directed. |
| 53 | M&L for preapartion of old plastered or unplastered surfaces of wall and applying one coats of cement base paint, white or tinted including all necessary scaffoldings etc. complete all as specified and directed. |
| 54 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and as directed. |
| 55 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 56 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm width or girth and applying red oxide primer over two coat of synthetic enamel paint (First quality) complete all as specified and directed |
| 57 | M&L for preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint (First quality) over and including one coat of red oxide complete all as specified and directed |
| 58 | M&L for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exceeding 10cm wide with one coat road marking paint, white or golden yellow etc. complete all as specified and as directed. |
| 59 | Taking up or down steel tubing /PP-R pipe and connections, including removal to store complete all as specified and directed. |
| 60 | S&F 20mm bore dia pipe of 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 61 | S&F in repairs chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 62 | S&F in repairs chromium plated pillar taps, fancy type of size 15mm dia, cast copper alloy, with capstan heads, fancy type screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed. |
| 63 | S&F in repairs Stop Valves (Angular stop cock) 15 mm bore dia pipe, Chromium Plated, Fancy Type, screwed down,high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | S&F in reapirs brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 65 | S&F in repairs PP-R Gate valves (brass insert) as per requirement of the site of size 25 mm outer dia of pipe complete all as specified and directed. |
| 66 | S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incluiding making connections and fixed in position incl, fixing in pipe etc complete all as specified and as directed. |
| 67 | S&F in reapirs 10 Ltr Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm dia PVC flushing pipe complete all as specified and directed. |
| 68 | S&F in repairs 20mm Dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 69 | S&F in repairs vitreous china wash basin, white, flat back, size 630x450mm excluding taps but including brackets with cutting for and pinning in ends of brackets or erecting stand, waste coupling and waste pipe etc. complete all as specified and directed. |
| 70 | S&F in repairs vitreous china pedestal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor complete all as specified and directed. |
| 71 | S&F in repairs plastic water closet seat cover, in any colours, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 72 | S&F in repairs vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 73 | S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 74 | S&F in repairs brass chromium plated mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 75 | S&F in reapairs PVC connections 15mm size of length 600mm with PTMT nuts complete all as specified and directed. |
| 76 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc. complete all as specified and directed. |
| 77 | S&F in repairs two way Bib Taps, cast copper alloy, 15 mm bore dia of pipe, Chromium Plated, with crutch or butterefly handle, screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 78 | S&F in repairs brass chromium plated 15mm bore sink cock with regular swinging spout (wall mounted model) with wall flange, and including fixing with all necessary GI fittings etc. complete all as specified and directed. (Make - Jaquar, Cat Part No. ARI-CHR-39347S or equvalent) |
| 79 | S&F in repairs 32mm PVC waste pipe for wash hand basin, 900mm long complete all as specified and directed |
| 80 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes 110MM Dia single socketed in any length with rubber ring joints fixed to walls at any height incluiding scaffolding as required at site complete all as specified and directed. |
| 82 | S&F PVC (SWR) Bends of any radius for bore dia 110mm at any height incluiding scaffolding as required at site complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipes 75MM Dia single socketed in any length with rubber ring joints fixed to walls at any height incluiding scaffolding as required at site complete all as specified and directed. |
| 84 | S&F PVC (SWR) Bends of any radius for bore dia 75mm at any height incluiding scaffolding as required at site complete all as specified and directed. |
| 85 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 86 | Dismantling water tanks exceeding 500 litres but not exceeding 1000 litres capacity and removing to store complete all as specified & directed. |
| 87 | Dismantling water tanks exceeding 1000 litres but not exceeding 2000 litres capacity and removing to store complete all as specified & directed. |
| 88 | S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position with all necessary fittings complete all as specified and directed. |
| 89 | S&F rotational moulded polyethylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position with all necessary fittings complete all as specified and directed. |
| 90 | Cleaning/removal of blockage from Nahani trap, floor trap, gully trap, IWC, EWC including CI or/ UPVC pipe or any other type of pipe including its junction to outside of wall to complete all as specified and directed. |
| 91 | Taking out carefully the cover slab of each manhole of depth from 1.0 metre to 2.00 metre and removing the sludge by mechanical process or manual process transporting and removing out of MOD land, disposal as per NAC (Notified Area Council) designated area or STP plant and cleaning with fresh water, placing the cover slab in position complete all as specified and directed. |
| 92 | Cleaning of blockage sewage line manually and then with fresh water of pipe 100 mm dia / 150 mm dia or above in between man holes and passing rubber ball of suitable size through line to ensure all blockage perfectly clear to the entire satisfaction of Engineer-in-Charge complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender