Tender For Dnit For Providing & Fixing Of Furniture Complete In All Aspects For C-Pyte C Us Kheri, Distt. Sangrur

Sharing tender

Tender for Dnit For Providing & Fixing Of Furniture Complete In All Aspects For C-Pyte C Us Kheri, Distt. Sangrur , Hostel Bed Providing And Supplying A Single Bed Of Overall Size 1915L X 900W X 650H. The Bed Is Fabricated Using Ms Hollow Box Square Section Of Size 40X40mm Having Thickness Of 1.2Mm. The Headboard Is At A Height Of 350Mm From The Mattress Panel Level And Legboard Is At A Height Of 200Mm From Mattress Panel Level. Mattress Panel Is Made Of 1Mm Thick Crca Sheet With All Four Sides Bended And Welded On Frame Which Is Supported On Pipes Of Size 25X25x1.2Mm. A Storage Box Of Size 830X450x300mm Having Openable Shutter Made In 0.8Mm Crca Sheet Is Provided Below The Bed. All The Ms Components Are Duily Powder Coated With Thickness Of 60 Microns. , Mattress For Bed 1890 Mm X 875 Mm Number Of Layers: Three Layers Thickness Of Top Layer (Tolerance :- ± 2 Mm): 25 Mm Thickness Of Core Layer (Tolerance :- ± 2 Mm): 50 Mm Thickness Of Bottom Layer (Tolerance :- ± 2 Mm) 25 Mm: Material Of Top Layer: Pu Foam Material Of Core Layer: Pu Foam Material Of Bottom Layer: Pu Foam , Classroom Desk 3 Seater (72X15x32) Material Of Desk Top And Seat 18Mm Thick Prelaminated Mdf With All Edges Must Be Sealed With 2 Mm Pvc Edge Banding Tape Trimmed On All Edges & Corners Top Size - 1800W X 380D X 18Mm Seat Size - 1800W X 300D X 18Mm Height Of Desk Top In Mm 810 Mm Type Of Desking Configuration Integrated Desk Cum Seatings Without Shelf / Storage Under Desk Two-Seater Desk Frame Structure - Made Up 32Mm X 32Mm X 1.2 Mm Thick Ms Square Pipe Horizontal Support Members - Made Up Of 32Mm X 32Mm X 1.2 Mm Thick Ms Square Pipe Additional Specification Full Desk Is Made In Knockdown Condition For Better Quality Product , Office Table With 3 Drawers For Officers Size (71X35x30) Providing And Placing An Executive Table With Both Side Pedestal. Table: The Table Is Made Up Of A Combination Of 18Mm And 25Mm Thick Prelaminated Mdf. The Top Of The Table Is 1800±10Mm Long And 900±10Mm Wide Made Up Of 25Mm Thick Prelaminated Mdf. The Modesty And Gable Ends Of The Table Is Made Up Of 18Mm Thick Prelaminated Mdf. The Whole Table Is Assembled Using Minifix And Dowels Standing Upto A Height Of 750±10Mm .All The Sharp Edges Of The Table Top And Gable Ends Are Lipped With 2Mm Thick Edge Banding Tapes To Provide The Smooth Finish To The Edges. Pedestal: Both Side Hanging Pedestals Are Provided. Both Pedestals Are Made Up Of 18Mm Thick Prelaminated Mdf. The Overall Size Of Pedestals Is 400(±10)X450(±10)X550(±10)Mm. The Pedestal On Left Side Is Provided With Three Openable Drawers With Good Quality Ss Handles. The Pedestal On Right Side Is Provided With One Drawer And One Shutter With Good Quality Ss Handles. The Drawers Move On High Quality Telescopic Channels And Shutter Is Provided With High Quality Hinges. All The Visible Edges Of The Pedestals Are Lipped With 2Mm Thick Pvc Edge Banding And The Remaining Hidden Edges Are Lipped With 0.8Mm Thick Note:- All The Drawers & Shutters Should Be Provided Lock And Key Mechanism. , Office Chairs Revolving With Arms For Officers Standerd Size Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat And Back Are Made Up Of Hot Pressed 12Mm Plywood And Moulded Pu Foam Upholstered With Fabric. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. Arm Rest: The Chair Shall Be Supplied With Polypropylene Handles. Mechanism: For Comfortable Seating, The Chair Is Supplied With Push Back Mechanism Having Single Point Locking Feature And Tilt Tension Adjustment Knob. The Pneumatic Height Adjustment For Healthy Seating That User Can Adjust Upto 100Mm. Base & Castors: Dual Castors Nylon/Abs Finish. The Pedestal Should Be Five Legged Nylon Pedestal Having Pitch Circle Dia 650Mm Fitted With 5 Nos. Of Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon Having Self-Lubricating Property For Friction Free Movement. , Visitor Chair With Arms Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat And Back Are Made Up Of Hot Pressed 12Mm Plywood And 50Mm Thick Polyurethane Foam Having Density 40Kg/M3 Upholstered With Fabric. The Backrest Is Designed With Contoured Lumbar Support Which Provides Support To Spine And Leaves Shoulder Free For Easy Movement. Arm Rest: The Chair Shall Be Supplied With Polypropylene Handles. Stand: The Chair Stand Is Cantilever Shape Made Up Of Ms Round Pipe Of Dia 25.4Mm Having Thickness 2Mm That Provides Great Comfort. The Stand Is Duly Powder Coated With Epoxy Powder Coating Having Thickness 60 Microns. Pvc Shoes Are Provided At The Bottom Of The Stand To Prevent Any Scratches On The Floor. , Office Table With 3 Drawers Providing And Placing A Teacher Table. The Table Top Is Made Of 25Mm Thick Prelaminated Mdf Board Having Size 1200Mm X 600Mm. The Edges Of The Table Are Edge Banded Using 2Mm Thick Pvc Edge Banding Tape. The Table Height Is 750Mm. The Table Frame And Footrest Is Made Using Ms Round Pipe Of Dia 25 Mm And Wall Thickness Minimum 1.2 Mm. A Three Drawer Storage And Shutter Storage Fabricated Using Ms Sheet Of Thickness 0.8Mm Is Attached With The Study Table. The Overall Size Of The Storage Is 400W X 450D X 500H. All The Ms Components Are Duly Powder Coated Having Thickness 60 Microns. Note:- All The Drawers & Shutters Should Be Provided Lock And Key Mechanism. , Computer Table Size (30X19x28) Supplying And Placing In Position Following Office Furniture - Computer Table. The Overall Height Is 750 Mm(±10), Width Is 485 Mm(±10) And Length Is 750 Mm(±10). Table Top Made From 18Mm Thick Pre Laminated Mdf And Placed Over The White Duly Powder Coated Square Pipe Of Size 50 X 25 And 1.2Mm. All Sharp Edges Of Top And Drawer Front Are Lipped With Edge Banding Tape 2Mm And Remaining With 0.8Mm Thick Edge Bands By Hot Process. Key Board Made Up Of 18Mm Thick Pre Laminated Mdf And Sliding On Good Quality 300Mm Telescopic Slider. The Table Is Furnished With Modesty And Under Structure Joined Through Square Pipe Providing Support Between Two Legs. The Metal Structure Is Equipped With 4 Adjusters For Perfect Balance. All Wooden Panels Prime Quality Board With Isi Marked. , Computer Chairs With Arms Standard Size Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat Is Made Up Of Hot Pressed 12Mm Plywood And Moulded Polyurethane Foam Upholstered With Fabric. Pvc Beading Is Applied Around The Seat. The Backrest Is Made Up Of Plastic Inner And Outer Covered With Moulded Polyurethane Foam And Upholstered With Fabric. Arm Rest: The Chair Shall Be Supplied With Polypropylene Fixed Arms Completely Joint With Seat. Mechanism: For Comfortable Seating, The Chair Is Supplied With Permanent Contact Mechanism Having Single Point Locking Feature And Tilt Tension Adjustment Knob. The Pneumatic Height Adjustment For Healthy Seating That User Can Adjust Upto 100Mm. Base & Castors: Dual Castors Nylon/Abs Finish. The Pedestal Should Be Five Legged Nylon Pedestal Having Pitch Circle Dia 650Mm Fitted With 5 Nos. Of Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon Having Self-Lubricating Property For Friction Free Movement.The Chair Dimensions Are As Follows: Outer Width: 610Mm,Seat Height From Ground: 440Mm,Seat Width: 475Mm,Seat Depth: 550Mm,Back Height: 510Mm,Back Width: 425Mm,All Dimensions Have A Tolerance Of ±10Mm. , Office Chairs Steel With Arms Standard Size Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat And Back Are Made Up Of Hot Pressed 12Mm Plywood And 50Mm Thick Polyurethane Foam Having Density 40Kg/M3 Upholstered With Fabric. The Backrest Is Designed With Contoured Lumbar Support Which Provides Support To Spine And Leaves Shoulder Free For Easy Movement. Pvc Beading Is Applied Around The Seat And The Back. Arm Rest: The Chair Shall Be Supplied With Polyurethane Fixed Arms Completely Joint With Seat And Back Stand: The Chair Stand Is Cantilever Shape Made Up Of Ms Round Pipe Of Dia 25.4Mm Having Thickness 2Mm That Provides Great Comfort. The Stand Is Duly Powder Coated With Epoxy Powder Coating Having Thickness 60 Microns. Pvc Shoes Are Provided At The Bottom Of The Stand To Prevent Any Scratches On The Floor. The Chair Dimensions Are As Follows: Overall Height: 820Mm,Outer Width: 580Mm,Overall Depth: 610Mm,Seat Height From Ground: 460Mm,Seat Width: 480Mm,Seat Depth: 460Mm,Back Height From Seat: 400Mm Back Width: 480Mm,Back Size (From Back): 450Mm, All Dimensions Have A Tolerance Of ±10Mm. , Almirah Steel Large (78X36x17) Providing And Supplying An Office Almirah Having Size 915W X 485D X 1980H (Excluding Pedestal). The Almirah Is Provided With Four Nos. Of Fixed Shelves With Stiffeners For Strength And Durability In Shelves. The Almirah Is Made In Ms Crca Sheet In 0.8Mm And Door Is Made In 0.8Mm Ms Crca Sheet. The Almirah Is Fabricated Using Cnc Laser Cutting Machine And Cnc Bending Machine, And Integrated Together Using Mig Welding. A Pedestal Of Height 125Mm Is Provided At The Bottom Of Almirah. The Almirah Is Provided With Six Lever Lock And Handle. The Almirah Is Duly Powder Coated Having Thickness 60 Microns. , Almirah Steel Small (50X30x17) Providing And Supplying An Office Almirah Having Size 900W X 430D X 1270H (Excluding Pedestal). The Almirah Is Provided With Two Nos. Of Fixed Shelves. The Almirah Is Made In Ms Crca Sheet In 0.8Mm. The Almirah Is Fabricated Using Cnc Laser Cutting Machine And Cnc Bending Machine, And Integrated Together Using Mig Welding. A Pedestal Of Height 125Mm Is Provided At The Bottom Of Almirah. The Almirah Is Provided With Six Lever Cam Lock And Handle. The Almirah Is Duly Powder Coated Having Thickness 60 Microns. , Steel Rack Large (78X37x13) Providing And Supplying A Slotted Angle Rack Having Size 900W X 400D X 1875H. The Rack Is Provided With Five Nos. Of Adjustable Shelves (Including Top Shelf). The Shelves Are Made Of 0.8 Mm Thick Ms Sheet Conforming To Commercial Quality Cr-1, Grade 340 Of Is 513. The Rack Is Fabricated Using Fabricated Using Cnc Laser Cutting Machine And Cnc Bending Machine. Nuts, Bolts And Gussets Are Used To Join The Bent Shleves To Ms Rolled Steel Angle Posts Of 40 X 40 X 3 Mm. The Slotted Angle Rack Has Ground Clearence Of 45Mm. The Rack Is Duly Powder Coated Having Thickness 60 Microns. , Lecture Stand Size (48X24x17) Providing And Placing Following In Office Furniture - Wooden Podium With Dual Mic Facility. Podium Is Provided With High Quality Two Numbers Of Gooseneck Mic And Amplifier Having Capacity Of 70 Watt.The Complete Structure Is Made Of 18Mm Thick Prelaminated Mdf. Natural Wood Finish Gives The Podium An Aesthetic Look.The Unit Is Fitted On The Skirting Made Of Plpb For The Strength And Perfect Balancing Of The Unit. The Overall Dimensions Are W-700Mm(±10) X D-400Mm(±10) X H-1200Mm(±10). Note:- Pedestal To Be Provided For A Person With Short Stature. The Branding Of Lecture Stand With:- C-Pyte Kheri, Sangrur , White Green Board Large (8X4) Feet For Class Room Magnetic Green Board Of Ceramic Steel Board Of E3 Engraved Ceramic Steel Surface , Pasted 9Mm Mdf Back By Gi Sheet Of Thikness 0.25 Mm Fited With Anodized Corner , Box Bed Double With Mattress (7X6) Feet Overall Size: 6X6 Material: 18Mm Commercial Plyboard Pasted With 0.8Mm Laminate With Duly Polished Teakwood Beading Provided With Box For Storage Mattress: 4 Thick, 32 Density Pu Foam , Sofa Set With 3+2 Configuration Seater For Office Providing And Supplying A Three Seater Sofa. The Frame Of The Sofa Is Made In Solidwood And Ply. The Seat And Back Of The Sofa Is Made In Foam Of Density 40Kg/M3 And The Upholstered With High Quaity Fabric That Provides An Elegant Look To The Sofa. The Outer Frame Of The Sofa Is Made In Saghwan Wood And Duly Polished. The Dimensions Of The Sofa Are As Follows: Overall Height - 815Mm,Overall Length - 1950Mm,Overall Depth - 760Mm All Dimensions Have A Tolerance Of ±10Mm. Providing And Supplying A Two Seater Sofa. The Frame Of The Sofa Is Made In Solidwood And Ply. The Seat And Back Of The Sofa Is Made In Foam Of Density 40Kg/M3 And The Upholstered With High Quaity Fabric That Provides An Elegant Look To The Sofa. The Outer Frame Of The Sofa Is Made In Saghwan Wood And Duly Polished. The Dimensions Of The Sofa Are As Follows: Overall Height - 815Mm,Overall Length - 1430Mm,Overall Depth - 760Mm All Dimensions Have A Tolerance Of ±10Mm. , Center Table (47X23x17) For Office Providing And Supplying A Wooden Center Table With Overall Size 1200Mm X 600Mm X 450Mm. Table Top Is Made Up Of Veneer Pasted Ply. The Top Is Duly Polished. The Legs Of The Table Are Made In Solidwood Which Is Pu Polished To Provide An Elegant Look. Table Top To Be Provided With 5Mm Thick Transparent Glass. , Dining Table For Mess Providing And Placing As Office Furniture - Office Table Constructed With Metal Frame And Prelaminated Mdf Board. The Table Top Made Of Thick 25Mm Prelaminated Mdf With Length Of 2400 Mm(±10) And Width Of 1200 Mm(±10) And Height 750 Mm(±10). All Sharp Edges Of Top Are Lipped With Pvc Edge Banding Tape Of Thickness 2Mm. The Table Top Is Fitted With Screws On The Four Leg Metal Frame Made Of Ms Square Pipe Of 40 X 40 X 1.2 Mm Thick. All The Legs Are Fiited With High Quality Rubber Shoes. The Overall Dimensions Of The Table Are L - 2400Mm(±10) X W - 1200Mm(±10) X H - 750 Mm(±10). All Wooden Panels Prime Quality Board With Isi Marked. , Dining Chairs Providing And Supplying A Study Chair With Seat And Back Made In Fibre. Cushion Is Provided On The Seat For Comfortable Seating. The Frame Of The Chair Is Made In Ms Capsule Pipe Of Size 13X33 Having Thickness 1.6Mm. The Frame Is Powder Coated With Powder Coat Thickness Of 60 Microns. The Dimensions Of The Chair Are As Follows: Overall Height - 810 Mm Seat Depth - 430 Mm Seat Width - 470 Mm Seat Height - 450 Mm Back Width - 450 Mm Back Height - 330 Mm All Dimensions Have A Tolerance Of ±10Mm , Chairs For Dinning Table Without Arms Providing And Supplying A Study Chair Without Arms With Seat And Back Made In Fibre. Cushion Is Provided On The Seat For Comfortable Seating. The Frame Of The Chair Is Made In Ms Capsule Pipe Of Size 13X33 Having Thickness 1.6Mm. The Frame Is Powder Coated With Powder Coat Thickness Of 60 Microns. The Dimensions Of The Chair Are As Follows: Overall Height - 810 Mm Seat Depth - 430 Mm Seat Width - 470 Mm Seat Height - 450 Mm Back Width - 450 Mm Back Height - 330 Mm All Dimensions Have A Tolerance Of ±10Mm , Wooden Chair With Ergonomic Design, Providing And Supplying A Wooden Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat Is Made Up Of Hot Pressed 12Mm Plywood And 50Mm Thick Polyurethane Foam Having Density 40Kg/M3 Upholstered With Leatherette. Arm Rest And Frame: The Chair Is Provided With Continuous Armrest Along With The Polished Saghwan Wooden Frame. The Back Is Cushioned Upholstered With Leatherette. The Chair Dimensions Are As Follows: Overall Height: 760Mm Outer Width: 620Mm Overall Depth: 460Mm Seat Height From Ground: 410Mm Seat Width: 510Mm Seat Depth: 440Mm Back Height From Seat: 340Mm Back Width: 330Mm All Dimensions Have A Tolerance Of ±10Mm. , Vvip Chair Providing And Supplying A Wooden Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. Seat And Back: The Seat And Back Shall Be Made Up Of Polished Wooden Frame Padded With High Resilience Polyurethane Foam Of Density 40 Kg/M3 And Upholstered With Leatherette Tapestry Designed To Provide Utmost Comfort. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. Arm Rest: The Chair Shall Be Supplied With Polished Wooden Armrest Completely Joined With Seat And Back. Frame: The Complete Frame Is Made In Saghwan Wood In Four Leg Design With Inticate Carving And Is Duly Melamine Polished. The Chair Dimensions Are As Follows: Overall Height: 1110 Mm Outer Width: 650 Mm Overall Depth: 700 Mm Seat Height From Ground: 540 Mm Seat Width: 640 Mm Seat Depth: 550 Mm Back Height From Seat: 685 Mm Back Width: 605 Mm All Dimensions Have A Tolerance Of ±10Mm. , 2 Seater Computer Table For Computer Lab Providing And Supplying A Two Seater Computer Table Having Overall Size 1500X750x750mm. The Frame Of The Table Is Made In Ms Sq Pipe Of Size 40X40 Having Thickness 1.2Mm. A Cpu And Ups Storage Is Provided In The Front Made From Ms Crca Sheet Of Thickness 0.8Mm. The Storage Is Lockable From The Front. All The Ms Components Are Powder Coated With Powder Coating Thickness Of 60 Microns. The Top Of The Table Is Made In 18Mm Plpb With All Edges Edge Banded With 2Mm Thick Pvc Edge Banding. Wire Managers Are Provided At The Top For Proper Wire Management. Pvc Keyboard Tray Is Provided With The Table. Adjusters Are Provided At The Bottom Of The Frame To Prevent Any Scratches On The Floor And Adjust Any Unevenness If Required. , Lecture Hall Chair Providing And Supplying An Ms Classroom Chair With Writing Pad. The Complete Chair Is Frame Is Made In Ms Pipe Of Dia 19.5±0.2 X 1.6±0.1Mm. The Seat And Back Are Made Of Ms Sheet Of Thickness 0.8±0.2Mm. The Chair Is Duly Powder Coated With Epoxy Powder Coating Having Thickness 60 Microns. Pvc Shoes Are Provided At The Bottom Of The Stand To Prevent Any Scratches On The Floor. The Writing Pad Is 18Mm Thick Plpb Of Size 250L X 450D. The Chair Dimensions Are As Follows: Overall Height: 820Mm Outer Width: 530Mm Seat Height From Ground: 450Mm Seat Width: 440Mm Seat Depth: 430Mm Back Height From Seat: 380Mm Back Width: 440Mm All Dimensions Have A Tolerance Of ±10Mm.