Tender For Dnit For Construction Of Common Work Shed For Artisans Near Step On Society, Dhuri
Tender Value
24.83 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sangrur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For Construction Of Common Work Shed For Artisans Near Step On Society, Dhuri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in toundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches. stacking the excavated soil clear from the edge of excavation and subsequent filling around masnry in l5cm, layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 2 | Cement Concrete l:4:8 with stone ballast of size 40 mm guage using mechanical mixer |
| 3 | Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and .shuttering in Subtructure |
| 4 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 5 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 6 | Structural steel work in angles, tees, flats, riveted,including cutting, fixing all gusset plates, bolts,nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc.of any span for building for bridges upto 15M span |
| 7 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge)(CSR 13.27(iii)0.60 mm Thick |
| 8 | Providing and fixing Gutter 250mm wide with PPGL 0.50 thick (TCT) manufactured from zinc / aluminium alloy coated high tensile steel, having minimum yield strength of 550 MPa of approved colour fixed by means of self-drilling screws limped washers as per the manufactures guidelines complete in all respect and to the entire satisfaction of engineer in charge. |
| 9 | Cold twisted deformed (Ribbed/Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1756-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 10 | Applying priming coat with metal primer on new steel or iron work including preparation of surface |
| 11 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concrete surface to give an even shade. |
| 12 | Cement Concrete 1:8:16 with 40mm guage Stone Ballast Using Concrete Mixture Volumetric type |
| 13 | First class burnt brick work laid in cement sand mortor 1:5 in first storey upto 4 metres above plinth level. |
| 14 | 12.5 mm thick cement plaster 1:4 |
| 15 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 16 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender