Short dated tender - Tender For Construction Of Hand Wash Station And Repair Of Toilet At Mukundwadi Municipal School At Zone No. 06 Under The Hindu Hriday Samrat Balasaheb Thakrey Urban Public Welfare Fund.
Tender Value
14.95 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
1 days left
EMD
14953
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Construction Of Hand Wash Station And Repair Of Toilet At Mukundwadi Municipal School At Zone No. 06 Under The Hindu Hriday Samrat Balasaheb Thakrey Urban Public Welfare Fund.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering, including shoring and strutting, etc., complete. (Lift up to 0.00 to 1.50 m.) By Manual Means. |
| 2 | Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) SSR Item No.21.10 Page No.115 |
| 3 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) SSR Item No.21.14 Page No.116 |
| 4 | Conveying materials ( Murrum, Building Rubish, Earth) for a lead of over 7 Kms. inclusive from the site of excavation to the site of deposition as directed. |
| 5 | Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader/paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 – Plant Mix Method and Grading-II Material. |
| 6 | Providing and fixing factory made Hydraulically Pressed Mechanically Vibrated and Compacted Precast Interlocking Cement Concrete Paving Blocks 80 mm thick in M-40 grade of approved size and shape for city streets, small/medium market roads, low volume roads, utility cuts on arterial roads, etc., as specified and as per IS 15658:2006, including cost of all materials, manufacturing, curing, transportation of blocks to work site, loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/crushed sand of 50 mm thickness, including necessary excavation in all strata, spreading blinding of fine sand over the prepared bed, compacting blocks by plate vibrator, etc., complete. |
| 7 | Providing and laying cast in situ/Ready Mix Cement Concrete in M-10 grade using trap/granite/quartzite/gneiss metal for foundation and bedding, including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening where special finish is to be provided, finishing if required, and curing complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible drum type mixer/concrete batch mix plant (pan mixer), etc., complete. With fine aggregate (crushed sand, VSI Grade). |
| 8 | Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete. |
| 9 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailin out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR Item No 25.11 Page No.133 |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR Item No 25.31 Page No.134 |
| 11 | Providing andlayingCastinsitu/ReadyMixcementconcreteM20oftrap/granite/quartzite/gneissmetal forR.C.C.slabsandlandingsasperdetaileddesignsanddrawingsincludingsteelcentering,formwork,coverblocks,laying/pumping,compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceorrougheningifspecialfinishistobeprovidedandcuringetc.complete,(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade |
| 12 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM20oftrap/granite/quartzite/gneissmetalforR.C.C.slabsandlandingsasperdetaileddesignsanddrawingsincludingsteelcentering,formwork,coverblocks,laying/pumping,compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceorrougheningifspecialfinishistobeprovidedandcuringetc.complete,(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 13 | Filling in plinth and floors with approved excavated material in 15cm. To 20cm. Layers including watering and compacting etc. complete. |
| 14 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete .SSR Item No 26.33 Page No.139 |
| 15 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. |
| 16 | Providing and laying matt finish ceramic tiles having size 30 cm x 30 cm, confirming to IS 15622:2006 (Group D II-A) and 7 mm to 8 mm thick for flooring in required position, laid on a bed of 1:4 cement mortar including cement float, filling joints with white/colour cement slurry, cleaning, curing etc. complete. |
| 17 | Providing and applying priming coat on concrete / masonry / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 18 | Providing and applying two coats of exterior weather shield paint of approved manufacture and approved colour to the plastered surfaces, including cleaning and preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days, etc., complete. NOTE: For Item Nos. 15 to 18, prior approval of the Superintending Engineer shall be necessary. BDO 35.26 – As directed by the Engineer-in-Charge. (SSR No. 35.26) |
| 19 | Providing and fixing 15 mm dia. ball cock, medium type, with PVC float, including sockets and necessary fittings, and testing as per municipal requirements, etc., complete. |
| 20 | Providing and fixing H.D.P. container, one-piece moulded water tank made out of high-density polyethylene and built corrugated, inclusive of delivery up to destination, hoisting and fixing of accessories such as inlet, outlet and overflow pipe, inclusive of all tanks having capacity between 200 litres and 1000 litres, complete. |
| 21 | Providing and constructing brick masonry inspection chamber of size 90 cm x 45 cm x 90 cm, including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels with half round G.S.W. pipes, brick masonry, plastering from inside, and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete, complete. |
| 22 | Providing, laying, fixing and jointing Eco-Drain 160 mm SN-4 Nu-Drain UPVC pipes or equivalent make, manufactured as per EN 13476 or equivalent I.S. 15328, with fittings such as bends, tees, couplers, etc., jointing with rubber lubricant, including necessary excavation, trench refilling with selected excavated material, etc., complete. |
| 23 | Manually clearing blockages from Nahani Traps, Gully Traps, Wash Basins, Sinks and W.C.s using necessary tools, to ensure proper functioning of the same, including removal and disposal of the choked material, etc., complete. |
| 24 | Manually clearing blockages from Nahani Traps, Gully Traps, Wash Basins, Sinks and W.C.s using necessary tools, to ensure proper functioning of the same, including removal and disposal of the choked material, etc., complete. |
| 25 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 26 | Manually clearing blockages from underground drainage lines, including inspection chambers, using necessary tools to ensure proper functioning of the line from chamber to chamber, etc., complete. |
| 27 | Providing and fixing 15 mm dia. CPVC pipe on walls, ceiling or floor with necessary fittings, remaking good the demolished portion, etc., complete. Including removing the existing pipeline, if necessary, and conveying and stacking the same in PWD chowky or as directed, etc., complete. |
| 28 | Providing, laying and fixing 110 mm diameter PVC pipe with all necessary fittings such as bends, tees, reducers, clamps, etc., including excavation, laying in trenches, jointing, testing, backfilling of trenches, and all incidental works complete. The item also includes dismantling and removing the existing pipeline, wherever necessary, and conveying and stacking the dismantled material at the PWD Chowky or at a location as directed by the Engineer-in-Charge, complete. |
| 29 | Providing and fixing 100 mm diameter stabilizer pipe / PVC soil, vent or waste pipe complete with all necessary fittings and fixtures such as bends, tees, single junctions, slotted vents, clamps, etc., including cutting, jointing, fixing, testing, and all incidental works, complete. |
| 30 | Providing and fixing 75 mm diameter stabilizer pipe / PVC soil, vent or waste pipe complete with all necessary fittings and fixtures such as bends, tees, single junctions, slotted vents, clamps, etc., including cutting, jointing, fixing, testing, and all incidental works, complete. |
| 31 | Providing and fixing C.P. angular stop cock with wall flange of approved make, including necessary sockets, union nut, etc., complete as directed by the Engineer-in-Charge. |
| 32 | Providing and fixing C.P. BIB cock with wall flange of approved make, including necessary sockets, union nut, etc., complete as directed by the Engineer-in-Charge. |
| 33 | Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05%. (Item to be used with prior permission of Superintending Engineer) |
| 34 | Dismantling brick masonry in lime or cement mortar and stacking the materials as directed, with all leads, lifts, etc. |
| 35 | Providingsolingusing80mmsizetrapmetalin15cm.layerincludingfillingvoids with Crushed sand/grit, ramming, watering etc. complete. |
| 36 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM20oftrap/granite/quartzite/gneissmetalforR.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks,laying/pumping,compactingandrougheningthesurfaceifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 37 | Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 38 | Providing and applying two coats of wall care putty on plastered surface, including preparing the surface, filling minor cracks and undulations, sanding smooth, scaffolding and all necessary labour and materials, complete. |
| 39 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat) etc. complete. |
| 40 | Providing and fixing mild steel grill work for windows, ventilators etc. weighing 20 kilograms per SQM, as per drawing including fixtures, necessary welding and painting with one coat of anti-corrosive paint and two coats of oil paint etc. complete. |
| 41 | PVC factory made solid panel door shutter with stainless steel fixutres & fastening |
| 42 | Providing and laying ceramic tiles having size 30 cm x 60 cm, conforming to the corresponding I.S., for dado and skirting in the required position with ready-made adhesive mortar of approved quality on plaster of 1:2 cement mortar, including joint filling with white/colour cement slurry, cleaning, curing, etc., complete. |
| 43 | ProvidingandlayingAntiskidCeramictilesofapprovedqualityofsize30cmx30cmandconfirmingtoIS15622-2006(Group-BIIA)forantiskidflooringinrequiredpositionlaidonabedof1:4cementmortarincludingcementfloat,fillingjointwithcementslurrycleaning curing etc. complete. |
| 44 | ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cmincluding1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfroundG.S.W.pipes,BrickMasonry,plasteringfrominsideandairtightC. I. cover of 75Kilogramwith lid and frame fixed in cement concrete. |
| 45 | Providing and fixing first class white glazed earthenware Orissa Type W.C. Pan, 580 mm dia., including P or S trap, cast iron soil and vent pipe up to the outside face of the wall, (1:5:10) cement concrete bedding 15 mm thick, 10 litre P.V.C. flushing cistern with all necessary pipe connections, etc., complete. |
| 46 | Providing and fixing white glazed earthenware lipped flat back/corner type urinal with 5 litre P.V.C. flushing cistern, complete with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C. flush pipe with fittings, including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall, complete. |
| 47 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc.complete |
| 48 | Providing and fixing machine cut, mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbary brown / RBI red / Ocean Brown granite stone partition with full moulding of edges etc. complete (both side polish). |
| 49 | Providing and laying 25 mm thick waterproof bedding for flooring in bath and W.C. areas in cement mortar 1:3, using approved waterproofing compound in specified proportion as per the manufacturer's specifications per bag of cement, including surface preparation, levelling, curing, ponding test, and all necessary workmanship, complete with a 10-year guarantee on ₹500/- court fee stamp paper. |
| 50 | Providingandfixingonwalls/ceiling/floor20mmdia.uPVCpipewithnecessaryfittings,remakinggoodthedemolishedportionetc.complete.IncludingremovingexistingpipelineifnecessaryandconveyingandstackingthesameinPWDchowkyorasdirectedetc. complete. |
| 51 | Providing and fixing in position UPVC ultra-violet stabilized cowl dome of 110 mm outer diameter, conforming to I.S. 4985, including making joints with solvent cement, etc., complete. (Cover for Air vent pipes) |
| 52 | Providing and fixing C.P. two-way BIB cock of approved make, including necessary sockets, union nut, etc., complete as directed by the Engineer-in-Charge. (European Toilet) |
| 53 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 54 | Providing and fixing in position Steel Fibre Reinforced Concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).-560 mm dia |
| 55 | Removing cement tiles, marble or polished Shahabad flooring or dado, excluding bed concrete, and stacking the dismantled materials as directed, including all leads, lifts, etc., complete. |
| 56 | Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works, etc. in wet or dry condition including lifts upto 9.00 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 57 | Transportation Charges including loadding and unloading and stacking Manure or sludge (for lead upto 7 kms) |
| 58 | Sanitary Pads Vending Machine |
| 59 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete PWD SSR It.N : 27.05 |
| 60 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. PWD SSR 2021-22 It.N : 32.07 |
| 61 | Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. IT NO 42.29 |
| 62 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish.PWD SSR 2021-22 It.N : 33.37 |
| 63 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.PWD SSR 2021-22 It.N : 42.78 |
| 64 | Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.PWD SSR 2021-22 It.N : 42.82 |
| 65 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.PWD SSR 2021-22 It.N : 42.63 |
| 66 | Providingandfixingsolidcoreflushdoorshutterinsingleleaf32mmthickdecorativetypeofexteriorgradeasperdetaileddrawingsapprovedfaceveneers3mmthickonbothfacesorasdirected,allnecessarybeads,mouldingsandlipping,wroughtironholdfasts,chromiumplatedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandles on both sides, and finishing with French Polish etc. complete. |
| 67 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM20oftrap/granite/quartzite/gneissmetalforR.C.C.beamsandlintelsasperdetaileddesignsanddrawingsorasdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc.complete.(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 68 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-15oftrap/granite/quartzite/gneissmetalforcopingtoplinthorparapet,mouldedorchamferedasperdrawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting,rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombedsurfaceandcuringetc.complete.TheCementMortar1:3plasterisconsideredforrenderingunevenandhoneycombedsurfaceonly.Newlylaidconcreteshallbecoveredbygunnybag,plastic,tarpaulinetc.(Woodencenteringwillnotbe allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 69 | Painting letters upto 20 cm height comp brushes, coir dusting, cleaning, including cost of paint etc complete. |
| 70 | School Library furniture items (Lumpsum) |
| 71 | Add Royalty Charges- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender