Tender For Upgradation And Replacement Of Water Supply Pipelines And Pumps At Kamachha C Us, Bhu.
Tender Value
58.41 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation And Replacement Of Water Supply Pipelines And Pumps At Kamachha C Us, Bhu.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soils and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia. |
| 3 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth not exceeding 1.5 m. |
| 4 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 150 mm dia Ductile Iron Class K-9 pipes. |
| 5 | Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 : Up to 600 mm dia |
| 6 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 200 mm dia pipes. |
| 7 | Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Up to 600 mm dia. |
| 8 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia. |
| 9 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 12 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : bituminous road. |
| 13 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 150 mm diameter pipe. |
| 14 | Labour for cutting C.I. pipe with steel saw. 150 mm diameter C.I. pipe |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work25 mm dia nominal bore |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work40 mm dia nominal bore |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work50 mm dia nominal bore |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work80 mm dia nominal bore |
| 19 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumasticpaint of approved quality :25 mm diameter pipe |
| 20 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumasticpaint of approved quality :40 mm diameter pipe |
| 21 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumasticpaint of approved quality :50 mm diameter pipe |
| 22 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumasticpaint of approved quality :80 mm diameter pipe |
| 23 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :25 mm diameter pipe |
| 24 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :40 mm diameter pipe |
| 25 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :50 mm diameter pipe |
| 26 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :80 mm diameter pipe |
| 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 29 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 30 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :40 mm nominal bore |
| 32 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :50 mm nominal bore |
| 33 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :80 mm nominal bore |
| 34 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 35 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore |
| 36 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore. |
| 37 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore |
| 38 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter metre |
| 39 | Electrical Work |
| 40 | Supply and installation of 6” M.S. column pipe with welded flange C -(Heavy) class pipe of 150mm nNB Tata/QST/Jindal make for submersible pump.Wall thickness of pipe -5.4mm, Length-3.0 Mtrs.Flange O.D,P.C.D., Hole dia as per I.S. StandardFlange Thickness-16 mm Note- 1- There will be grooving in each flange for submersible cable.2- 4 Nos. M.S. triangular clit should be welded in each flange.3- Flange should be welded in right angle.4-Each column pipe should be painted by anticorrosive black paint after fabrication & inspection by engineer incharge. |
| 41 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required. 80mm dia. |
| 42 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required. 100mm dia. |
| 43 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required. 150mm dia. |
| 44 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 150mm dia |
| 45 | Supply, installation, testing and commissioning of new submersible pump motor set having cast iron body, three phase, 415V (15%, + 6%), 50 Hz., size -150mm., KW/H.P. - 24.5/33 H.P., insulation class-B, water cooled, Head range 90-80 Mtrs., Discharge 834-1500 LPM, Star-Delta operation, Duty-S-1, RPM-2900, suitable for 200mm. well diameter vertical operation including dismantling of the existing submersible pump motor set including pipelines from 14\\"x8\\" Borewell of Kamachha campus, loading and unloading, labour charges, cartage of pump set & jointing of cables etc. complete as required as per direction & entire satisfaction of engineer-in-charge. The old pump motor to be returned by contractor to the Department(Make- KSB/ Kirloskar/ Crompton/Wilo- Mather & Platt. |
| 46 | Supply, installation, testing & commissioning of 40 HP 3 phase Star Delta Starter Siemens Make, Model No. RAJA+FASD 40 HP or Equivalent make BCH/L&T. |
| 47 | Supply and fixing 10.00 Sqmm three core flat submersible cables with bare bunched copper conductor insulated with PVC for submersible pump motor with voltage grade up to 1100 Volt generally confirm to IS694:1990. Make :-Finolex/L&T/ National/ RR Kabel/Polycab/KEI. |
| 48 | Credit for unserviceable GI pipe assorted size including loading, transportation, collection, separation as per direction of Engineer-Incharge. |
| 49 | Credit for unserviceable CI pipe assorted size including loading, transportation, collection, separation as per direction of Engineer-Incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender