Tender For maintenance and repair To Water Treatment Plant And Raw Water Pump Houses At Balijhara Water Works
Tender Value
1.06 Crore
Estimated cost
Bid Submission
05 Oct 2026
21 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Water Treatment Plant And Raw Water Pump Houses At Balijhara Water Works
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debris with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. ( Excluding GST) |
| 2 | Dismantling and removing R.C.C. chajja, shelves, fins and parapet including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debris with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. ( Excluding GST) |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all labour, T&P, staging, scaffolding, etc. complete with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. ( Excluding GST) |
| 4 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts, removing the debris within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debris with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.( Excluding GST) |
| 5 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening, removing the debris within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debris with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. ( Excluding GST) |
| 6 | Dismantling steel work in all types of sections upto a height of 5.00m above plinth level excluding cutting of rivet with cost of labour, materials, scaffolding etc. complete as per direction of Engineer-in-charge. ( Excluding GST) |
| 7 | Earth work excavation in all kinds of soil with initial lead and lift including rough dressing in layers not exceeding 0.30m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge. ( Excluding GST) |
| 8 | Filling in foundation and plinth with sweet sand including watering and ramming but excluding cost of GST as directed by the Engineer-in-charge . ( 10% to be deducted from measured qty for voids) |
| 9 | Back Filling in foundation and plinth with excavated materials moorum including watering and ramming, water charges but excluding cost of GST as directed by the Engineer-in-charge |
| 10 | P.C.C(1:3:6) of using 40mm. & down H.B.G chips of approved quality in foundation & plinth including mixing hoisting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, water charges etc. complete but excluding cost of GST as directed by Engineer-in-charge |
| 11 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. (Repair work) |
| 12 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, water charges etc. all complete but excluding GST as directed by Engineer-in-charge. |
| 13 | Supply TMT rebar of minimum grade of Fe-500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). |
| 14 | 40mm. (av) thick graded cement concrete in C.C.(1:2:4) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. (Repair work) |
| 15 | Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge. |
| 16 | R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc. |
| 17 | Beam, column, girder |
| 18 | Lintel |
| 19 | Roof slab, landing, projection Chajja upto 4.30 mtr. |
| 20 | Brick work in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in-charge |
| 21 | 12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, water charges etc. complete but excluding cost of GST as per direction of Engineer-in-charge |
| 22 | 12 MM thick Cement plaster with cement mortar (1:4) proportion, over brick/rcc work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge |
| 23 | Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge.( Excluding GST) |
| 24 | Supply of 32mm thick single leaf seasoned piasal wood with anti-termite treated paneled Door shutters having both side styled moulded having bottom rail of 200 mm thick, top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST) N.B.- Size & design decided by the department as per requirement at site. |
| 25 | Providing, supplying, fitting, fixing of M.S. grills for windows, of approved quality & design including fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge. ( Excluding GST) |
| 26 | Providing, supplying, fitting, fixing of GI pipe gate with mid plate of approved quality & design as per site requirment including all locking arrangements, hold fast & fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge. ( Excluding GST) |
| 27 | Providing fitting and fixing the fabricted MS structures after cutting, bending, making holes, jointing ,welding as per requirement and Hoisting fabricated structurals, placing in position as per the drawings or as directed with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments etc all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 28 | Supplying, fitting and fixing of hand railing using 40mm dia GI pipe of medium duty with balustrade of size 25mm dia GI pipe pipe of medium duty @ 0.90mtr. C/C and 20mm dia GI pipe of medium duty of bracing in 2 rows & 100mm dia GI heavy duty pipe with all fittings at water supply point as per approved design and specification including, febrication cost, cutting holes in existing rcc members to fix balustrade with grout as required. with supply of all materials, labour, transportation, loading and unloading at both ends, T&P, etc. all complete as per the direction of Engineer-in-charge (Excluding cost of GST). |
| 29 | 20mm dia GI Pipe ( Medium Quality) |
| 30 | 25mm dia GI Pipe ( Medium Quality) |
| 31 | 40mm dia GI Pipe ( Medium Quality) |
| 32 | 100mm dia GI Pipe ( Medium Quality) |
| 33 | Supplying, fitting & fixing of precoated Galvolume metal sheet or its equivalent of 1000 mm width with total coated thickness of 0.5mm. for roof approved quality, drilling hole fixing of wind tie and ridges or valley including supply of all EPDM screw, ridge pieces, eve board, wind ties, cutting the sheet to proper profile with supply of all materials, labour, transportation, loading and unloading at both ends, T&P, etc. all complete as per the direction of Engineer-in-charge (Excluding cost of GST). |
| 34 | Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.( Excluding GST) |
| 35 | Filling the gap between aluminium frame & adjecent RCC/Brick work by providing weather silicon sealant by gun of approved quality as per direction of EIC including supply of all material labour T&P taxes stagging etc all complete but excluding GST as directed by EIC . |
| 36 | Preparing the structural member surface by scrapping cleaning the rusts and spray painting the same with two coats of coaltar epoxy paint over a coat of inorganic zinc silicate primer of approved quality,etc.complete including all staging ,scaffolding upto 4.60mtr,labour,all axes,tollage materials,fuel,brushes tools ,gate entry fees etc complete but excluding GST as directed by the Engineer-in-charge. |
| 37 | Painting two coats with approved quality & shade enamel wood paint on new wood work / old wood work over one coat of primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 38 | One coat priming with water bond cement primer to the newly plaster surface of the exterior / interior wall surface of the interior wall of approved make & shade to make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, transportation charges, water charges etc. complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 39 | Distempering two coats of approved quality and shade including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including cost & supply of all material labours, T&P scaffoldings, taxes etc. complete but excluding cost of GST as directed by the Engineer in charge |
| 40 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, water charges etc. complete but excluding cost of GST as directed by the Engineer-in-charge. |
| 41 | Supplying, fitting & fixing of following C-PVC, PVC, CP, brass & other ancillary materilas of ISI make conforming for water supply & sanitary work including cement & plumbing solvent etc. as required all complete at any height & any level including cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, taxes if any excluding GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 42 | 15mm dia UPVC Pipe |
| 43 | 20mm dia UPVC Pipe |
| 44 | 25mm dia UPVC Pipe |
| 45 | 40mm dia UPVC Pipe |
| 46 | flush bend |
| 47 | 15mm dia CP angular stop cock |
| 48 | 15mm dia CP concealed stopcock |
| 49 | 20mm dia CP concealed stopcock |
| 50 | 10lit. Capacity PVC low level cistern |
| 51 | 15mm dia CP pillar cock |
| 52 | 100mm dia CP Grating |
| 53 | 15mm dia CP long body bibcock |
| 54 | 15mm dia CP 600mm long flexible connection pipe |
| 55 | 32mm CP Waste full thread 80mm long |
| 56 | 32mm PVC waste pipe for basin |
| 57 | 15mm dia CP swan neck Pillarcock |
| 58 | 5mm bevelled edge plate glass mirror(24\\"x18\\") with masonite board and screw |
| 59 | CP towel ring |
| 60 | CP soap holder |
| 61 | Porcelain Sink (24\\"x18\\"x10\\") |
| 62 | U-PVC Clamp with nail (15mm to 50mm) |
| 63 | 110mm Pipe |
| 64 | 110mm door bend |
| 65 | 110mm Plain bend |
| 66 | 110mm PVC clamp with nail |
| 67 | 2000ltr capacity PVC sintex tank pure white colour -3core |
| 68 | Jam nut 65mm dia |
| 69 | Jam nut 25mm dia |
| 70 | 15mm dia brass bibcock |
| 71 | 15mm dia brass stopcock |
| 72 | Epoxy paint |
| 73 | Enamel paint |
| 74 | Red oxide primer |
| 75 | 3mm rubber insertion |
| 76 | Nut, bolt with washer |
| 77 | Supplying of labour for cleaning inside the pump house, painting of motors in all respect & leak repar work to CI/DI pipes etc. all complete at any height & any level including cost of labours as per direction of the Engineer- In-charge.( Excluding GST) |
| 78 | Un- Skilled labour |
| 79 | Skilled labour |
| 80 | Dewatering of accumulated water by engaging required numbers of 5HP diesel pump with all accessories, T&P, suction & disposal pipe with fule, operation charges, engagement hire & running charges etc. all complete as per the direction of Engineer-in-charge.(Excluding cost of GST) N.B: No idle rates shall be paid. |
| 81 | Engagement of front end loader 1 cum bucket capacity for shifting of pumps for mantainance & painting work & for lifting debris scums etc. as required with hire running charge of machineries loading & un-loading of machine, POL, Port entry fee etc all complete as per the direction of Engineer-in-charge.(Excluding GST) N.B: No idle rates shall be paid. |
| 82 | Engagement of Tractor for shifting of extra excavated materials & other debris from work site to dumping yard or to low laying area within a lead of 6.00 km. for clearance of work site etc. as required with hire running charge of machineries loading & un-loading of machine, POL etc all complete as per the direction of Engineer-in-charge.(Excluding GST) N.B: No idle rates shall be paid. |
| 83 | Providing & laying quarry dust of aprroved quality watering and compacting to the required density with supply of all material labour transporation hire and running charge of equipments, taxes, tollage, royalties etc all complete but excluding GST as directed by Engineet-In-Charge. |
| 84 | Supplying fitting fixing of Vitrified floor tiles (premimum Quality 600 x600 mm size) in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.(New work) |
| 85 | Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles (premimum Quality 200 x300 mm or 200 x200 mm size) as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage, water charges etc all complete but excluding GST as per direction of Engineer in charge. |
| 86 | Painting and writing of figures and letters in different size upto 120 mm height with Supply of all labour, materials, T&P, taxes, etc. complete as directed by Engineer in charge.( Excluding GST) |
| 87 | Providing & laying per-cast RCC collar of M30 grade of following dia with 1½\\" thick & 1'-00\\" height all complete with supply of all materials, labour, T&P, taxes, royalties, tollage, ,transportation loading & unloading etc. all complete as directed by Engineer-in-charge. (Excluding the cost of GST). |
| 88 | Providing mechanical joints collar of D.I pipes & fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification all complete at any height & any level with cost & supply of all materials, labours, T&P, all transportationexcluding the cost of GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 89 | Supplying of C.I pipes screwed double flanged pipe conforming to (IS-1536) as per requirment all complete at any height & any level with cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, taxes if any excluding GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 90 | 200 mm dia CI Screwed double flanged pipe |
| 91 | 250 mm dia CI Screwed double flanged pipe |
| 92 | 300 mm dia CI Screwed double flanged pipe |
| 93 | CI specials & fittings |
| 94 | Supplying, fitting & fixing of manufactured from reputed company cast iron Non Rising Spindle type Sluice Valve confirming to IS 1484 of ISI make for water supply etc. all complete at any height & any level including cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, taxes if any excluding GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 95 | 200mm dia Sluice Valve |
| 96 | 250mm dia Sluice Valve |
| 97 | 300m dia Sluice Valve |
| 98 | Supplying, fitting & fixing of centrifugally cast (spun) iron S/S pressure pipes Class-LA, conforming to IA:1536-2001 as per specification complete as per specification all complete at any height & any level with cost & supply of all materials, labours, T&P, all transportationexcluding the cost of GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 99 | 200 mm dia CI S/S pressure pipe |
| 100 | 250 mm dia CI S/S pressure pipe |
| 101 | 300 mm dia CI S/S pressure pipe |
| 102 | Supplying, fitting & fixing of Self Priming Centrifugal Mono Block 2HP Pump as per IS 5120 (Q3 Catagory) of reputed company ISI mark with all related accessories for water supply etc. all complete at any height & any level including cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, taxes if any excluding GST, etc. all Complete as per direction of the Engineer- In-charge. |
| 103 | 3core 2.5 sq. mm PVC copper circular sheathed cord with flexible conductor (V2) as per IS 694 (Q2 Category) including supply of all labour, material, taxes, tollage, T&P etc all complete but excluding GST as per direction of Engineer in charge. |
| 104 | Wiring to 16/20 Amp. power point by using BIS certified 2.5 Sq.mm copper flixible wire, 16/20 Amp. moular switch & socket along with modular board & plate as per requrment of work including supply of all labour, material, taxes, tollage, T&P etc all complete but excluding GST as per direction of Engineer in charge. |
| 105 | Providing and laying factory made chamfered edged cement concrete paver blocks in footpath, park lawn, drive way or light traffic parking etc. M30 strength and 80 mm thick ,made by table vibratory method using PU mould , laid in required colour & parten over 50 mm thick compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer throught vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour , t&P taxes tollage etc all complete but excluding GST as directed by EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender