Tender For Complete Repairing, Servicing Including Replacement Of Damaged Components Of 3 Nos. Dwf Motor Starter Panels And Other Allied Electrical Works At Usha Gate Dps Under Kudghat Unit / S&D Department.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
5800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Complete Repairing, Servicing Including Replacement Of Damaged Components Of 3 Nos. Dwf Motor Starter Panels And Other Allied Electrical Works At Usha Gate Dps Under Kudghat Unit / S&D Department.
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting the main supply, open out the cables, dismantling the wirings and damaged components from the panels by engaging expert personnel and by using necesaary tools and tackles including complete cleaning of busbars inside the panels. |
| 2 | Supply and fixing of 3 pole , 34-50A current rating, 415V,AC, 50Hz (50 kA) Thermal Megnatic release DZ1-160N type MCCB of any reputed make. |
| 3 | Supply and fixing of 32 A (AC3 rated ), MNX type Power contactor of any reputed make. |
| 4 | Supply and fixing of 3 pole , 84-125A current rating, 415V,AC, 50Hz (50 kA) Thermal Megnatic release DZ1-160N type MCCB of any reputed make. |
| 5 | Supply and fixing of 1 pole Electronic timer type ST100 , 3-30 sec. |
| 6 | Supply & fixing of the Current Transformer, Ratio : 50/5A, 5VA, Class 0.5(Make: KAPPA/AE) |
| 7 | Supply and fixing of Modular Push button actuators(with pla stic front ring), Rised, colour: Red, green, blue, white, yellow, blackMake: (Make: L & T/ABB/ Schneider/Simence/ GE) |
| 8 | Supply & delivery of the following Single Function Meterwith I/P-50-550VAC(P-P), Aux Sup-80-300 VAC, CTSecondary-1A/5A with inbuilt Selector Switch for 3-Ph,CT/PT programmable (L&T/ABB/SCHNEIDER): 3 Ph LED Ammeter, (Class-1) |
| 9 | Supply & delivery of the following Single Function Meterwith I/P-50-550VAC(P-P), Aux Sup-80-300 VAC, CTSecondary-1A/5A with inbuilt Selector Switch for 3-Ph,CT/PT programmable (L&T/ABB/SCHNEIDER): 3 Ph LED Voltmeter, (Class-1) |
| 10 | Supply and delivery of Thermal overload relays(Make: L & T/ABB/Schneider/Simence/ GE/Minilec) of thefollowing range: 14-23, MN2 |
| 11 | S/F 230V, LED indicating lamp, (other colours) |
| 12 | Supply & fixing of 1.1kV Grade,10 sq mm,' FR' stranded copper wire any reputed make. |
| 13 | Supply and fixing of 1.1kV Grade,1.5 sq mm single core ' FR' PVC insulated copper conductor cable. Make : Havells/Unicab / Polycab / KEI Cables or Any reputed make. |
| 14 | Fitting, fixing, and mounting of all components inside the electrical panel, including necessary panel door cutting/modification works as required including supply and fixing of required terminal blocks, cable glands, and standard installation consumables. |
| 15 | Rewiring of the starter panel, including necessary terminations using copper cable lugs, PVC insulation tapes, and hardware (nuts & bolts) including proper termination inside the panel and end-to-end connection of the motor cable (both panel and motor ends) as per requirement. |
| 16 | Complete checking and testing of the power and control circuit connection for indicating, closing, starting and tripping arrangement with protection components by using necessary tools and tackles including trial run of the motor as per direction of EIC. |
| 17 | After completion of surface cleaning, the LT panel shall be thoroughly prepared for painting by removing all rust, loose paint, and surface contaminants. Following surface preparation, two coats of corrosion-resistant enamel paint shall be applied uniformly over the panel. This painting work shall be carried out to ensure adequate protection against corrosion, moisture, and mechanical damage and to the satisfaction of the Engineer-in-Charge (EIC). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender