Tender For Rate Contract For Repair And Maintenance Of Turbo Chargers In Wrpl.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Sep 2026
13 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rate Contract For Repair And Maintenance Of Turbo Chargers In Wrpl.
BOQ
| Sl. No. | Item Description |
| 1 | RATE OF GST APPLICABLE FOR ALL ITEMS OF THE BOQ.BIDDER TO SELECT ONE GST RATE FROM THE DROP DOWN LIST |
| 2 | SMPL Gujarat |
| 3 | Glass beading & Dynamic balancing: Removal of all rotary components like turbine, impeller, thrust collar, impeller adjustment washe r, locknut, lock washer and impeller drive washer by using special jacking tools. Cleaning of all rotary components by glass beading (blasting). Checking trueness & diameter of turbine shaft at various locations, checking of turbine wheel diameters & compressor w heel diameter, Dynamic Balancing of turbine shaft individually and Dynamic balancing of complete rotor assembly of turbocharger (wi thin 0.1 gm), final assembly of all components of Turbocharger rotor assembly. The job includes dressing/grinding of turbine blades as per requirement or as per direction of EIC. |
| 4 | Glass beading & cleaning of various components of TC: Pre cleaning of following components of TC and glass bead blasting cleaning of the same as per requirement or as directed by EIC. |
| 5 | Stationary Nozzle ( Nozzle Ring) |
| 6 | Diffuser Ring/Cone |
| 7 | Shroud Ring / Cover ring/ Labyrinth Ring |
| 8 | Compressor air inlet Wall Insert |
| 9 | DP Test: Dye Penetration test to be done as per EIC's instruction to detect cracks / defects from surface. DP test kit of EIC approv ed make/model to be used as per manufacturer’s recommendations . Photos to be attached with reports. As per applicable ASME/ATSM Sta ndard |
| 10 | DP Test Nozzle Ring |
| 11 | DP Test Shaft |
| 12 | DP Test Turbine Wheel |
| 13 | DP Test Compressor Wheel |
| 14 | MPI Test : Magnetic Particle indentation test to be done as per EIC's instruction. Photos to be attached with reports.As per SE709 , ASME |
| 15 | MPI of Turbine Wheel & Shaft |
| 16 | UT Test: Ultrasonic test for shaft and turbine wheel for internal crack detection, as per applicable ASME standard |
| 17 | Micro Hardness test for compressor wheel for evaluation of material strength. AS per ASTM E92, ASTM E384, ASTM E1077, ASTM B578, AS ME Sect. IX, MIL Specifications ISO 6507 / ISO 9015 |
| 18 | Fluorescent penetration Test: to be carried out as per SE165 of ASME ,test to be done as per EIC's instruction. Photos to be attac hed with reports. |
| 19 | Turbine Wheel |
| 20 | Compressor Wheel |
| 21 | Transoprtation Charges: To & fro transportation charges from IOCL WRPL station to party's works & back. Charges includes transit ins urance, loading & unloding of T/c assembly at party's works, driver expenditure, total 03 days Night stay of utility vehicle & other s etc. |
| 22 | Viramgamstation to party's works & back |
| 23 | Supply of Spares |
| 24 | NA 355 Spares |
| 25 | Shaft lock nut |
| 26 | Shaft lock washer |
| 27 | Spacer |
| 28 | SMPL Rajasthan |
| 29 | Glass beading & Dynamic balancing: Removal of all rotary components like turbine, impeller, thrust collar, impeller adjustment washe r, locknut, lock washer and impeller drive washer by using special jacking tools. Cleaning of all rotary components by glass beading (blasting). Checking trueness & diameter of turbine shaft at various locations, checking of turbine wheel diameters & compressor w heel diameter, Dynamic Balancing of turbine shaft individually and Dynamic balancing of complete rotor assembly of turbocharger (wi thin 0.1 gm), final assembly of all components of Turbocharger rotor assembly. The job includes dressing/grinding of turbine blades as per requirement or as per direction of EIC. |
| 30 | Replacement / Reparing of turbine blades: Repairing of TC by removing all 134 tab locks, 67 turbine blades & lacing wires (long & s hort) from turbine disc, cleaning of locking areas, fitting back all blades, aligning the blades, fitting of new tab locks & lacing wires (supplied by IOCL) and tightening of all tab locksas per requirement or as per direction of EIC. |
| 31 | Glass beading & cleaning of various components of TC: Pre cleaning of following components of TC and glass bead blasting cleaning of the same as per requirement or as directed by EIC. |
| 32 | Stationary Nozzle ( Nozzle Ring) |
| 33 | Diffuser Ring/Cone |
| 34 | Shroud Ring / Cover ring/ Labyrinth Ring |
| 35 | Compressor air inlet Wall Insert |
| 36 | DP Test: Dye Penetration test to be done as per EIC's instruction to detect cracks / defects from surface. DP test kit of EIC approv ed make/model to be used as per manufacturer’s recommendations . Photos to be attached with reports. As per applicable ASME/ATSM Sta ndard |
| 37 | DP Test Nozzle Ring |
| 38 | DP Test Shaft |
| 39 | DP Test Turbine Wheel |
| 40 | DP Test Compressor Wheel |
| 41 | MPI Test : Magnetic Particle indentation test to be done as per EIC's instruction. Photos to be attached with reports.As per SE709 , ASME |
| 42 | MPI of Turbine Wheel & Shaft |
| 43 | UT Test: Ultrasonic test for shaft and turbine wheel for internal crack detection, as per applicable ASME standard |
| 44 | Micro Hardness test for compressor wheel for evaluation of material strength. AS per ASTM E92, ASTM E384, ASTM E1077, ASTM B578, AS ME Sect. IX, MIL Specifications ISO 6507 / ISO 9015 |
| 45 | Fluorescent penetration Test: to be carried out as per SE165 of ASME ,test to be done as per EIC's instruction. Photos to be attac hed with reports. |
| 46 | Turbine Wheel |
| 47 | Compressor Wheel |
| 48 | Transoprtation Charges: To & fro transportation charges from IOCL WRPL station to party's works & back. Charges includes transit ins urance, loading & unloding of T/c assembly at party's works, driver expenditure, total 03 days Night stay of utility vehicle & other s etc. |
| 49 | Abu Road station to party's works & back |
| 50 | Rajola station to party's works & back |
| 51 | Supply of Spares |
| 52 | NA 295 Spares |
| 53 | Shaft lock nut |
| 54 | Shaft lock washer |
| 55 | Spacer |
| 56 | NA 355 Spares |
| 57 | Shaft lock nut |
| 58 | Shaft lock washer |
| 59 | Spacer |
| 60 | MPPL Rajasthan |
| 61 | Glass beading & Dynamic balancing: Removal of all rotary components like turbine, impeller, thrust collar, impeller adjustment washe r, locknut, lock washer and impeller drive washer by using special jacking tools. Cleaning of all rotary components by glass beading (blasting). Checking trueness & diameter of turbine shaft at various locations, checking of turbine wheel diameters & compressor w heel diameter, Dynamic Balancing of turbine shaft individually and Dynamic balancing of complete rotor assembly of turbocharger (wi thin 0.1 gm), final assembly of all components of Turbocharger rotor assembly. The job includes dressing/grinding of turbine blades as per requirement or as per direction of EIC. |
| 62 | Replacement / Reparing of turbine blades: Repairing of TC by removing all 134 tab locks, 67 turbine blades & lacing wires (long & s hort) from turbine disc, cleaning of locking areas, fitting back all blades, aligning the blades, fitting of new tab locks & lacing wires (supplied by IOCL) and tightening of all tab locksas per requirement or as per direction of EIC. |
| 63 | Glass beading & cleaning of various components of TC: Pre cleaning of following components of TC and glass bead blasting cleaning of the same as per requirement or as directed by EIC. |
| 64 | Stationary Nozzle ( Nozzle Ring) |
| 65 | Diffuser Ring/Cone |
| 66 | Shroud Ring / Cover ring/ Labyrinth Ring |
| 67 | Compressor air inlet Wall Insert |
| 68 | DP Test: Dye Penetration test to be done as per EIC's instruction to detect cracks / defects from surface. DP test kit of EIC approv ed make/model to be used as per manufacturer’s recommendations . Photos to be attached with reports. As per applicable ASME/ATSM Sta ndard |
| 69 | DP Test Nozzle Ring |
| 70 | DP Test Shaft |
| 71 | DP Test Turbine Wheel |
| 72 | DP Test Compressor Wheel |
| 73 | MPI Test : Magnetic Particle indentation test to be done as per EIC's instruction. Photos to be attached with reports.As per SE709 , ASME |
| 74 | MPI of Turbine Wheel & Shaft |
| 75 | UT Test: Ultrasonic test for shaft and turbine wheel for internal crack detection, as per applicable ASME standard |
| 76 | Micro Hardness test for compressor wheel for evaluation of material strength. AS per ASTM E92, ASTM E384, ASTM E1077, ASTM B578, AS ME Sect. IX, MIL Specifications ISO 6507 / ISO 9015 |
| 77 | Fluorescent penetration Test: to be carried out as per SE165 of ASME ,test to be done as per EIC's instruction. Photos to be attac hed with reports. |
| 78 | Turbine Wheel |
| 79 | Compressor Wheel |
| 80 | Transoprtation Charges: To & fro transportation charges from IOCL WRPL station to party's works & back. Charges includes transit ins urance, loading & unloding of T/c assembly at party's works, driver expenditure, total 03 days Night stay of utility vehicle & other s etc. |
| 81 | Beawar station to party's works & back |
| 82 | Sanganer station to party's works & back |
| 83 | Supply of Spares |
| 84 | NA 295 Spares |
| 85 | Shaft lock nut |
| 86 | Shaft lock washer |
| 87 | Spacer |
| 88 | NA 355 Spares |
| 89 | Shaft lock nut |
| 90 | Shaft lock washer |
| 91 | Spacer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender