Tender For Periodical Services To Exterior Surfaces I.E Chajja Repairs, Steeel And Wooden Painting To Certain Md And Otm Accn Under Phase-I (Rupa, Gachham, Birpur, Dp, Bomdila) Of Age B/R Under Ge Tenga
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Exterior Surfaces I.E Chajja Repairs, Steeel And Wooden Painting To Certain Md And Otm Accn Under Phase-I (Rupa, Gachham, Birpur, Dp, Bomdila) Of Age B/R Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 2 | M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 3 | M&L Mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 4 | M&L for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) for chajjas supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelvesall as specified and as directed. |
| 5 | Use and waste of flat Formwork to chullah hoods, chajjas, troughs and similar items including edges |
| 6 | Dismantling wrought iron or mild steel work of any description |
| 7 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 8 | S&Fin mild steel work conforming to Fe 290 Gde-E-165 in post, wall & struts angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc.complete as specified. |
| 9 | S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 10 | M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded aggregate) . |
| 11 | Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 12 | M & L 15 mm thick rendering on wall in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement |
| 13 | M & L for 20mm thick rendering in cement mortar 1:4 on brick , concrete and roof surface with WPC @ 200ml per 50Kg by weight of cement finishing the surfaces even & fair, complete all as directed.(WPC will be measured and paid separately). |
| 14 | Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth W/O using extra cement. |
| 15 | Supply only Liquid water proofing compound. |
| 16 | M&L for 1mm thick one coat of wall care putty on wall all as specified and directed. |
| 17 | M&L for Preparing new plastered surfaces and applying Two coats of cement base paint over one coat of white wash on surfaces of walls complete all as specified and directed. |
| 18 | M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 19 | Preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 20 | M&L for Preparing new plastered surface of wall applying two coats of distemper oil emultion over a coat of Chalk whiting |
| 21 | Material and labour for Complete removal of existing treatment for old wall surface, including washing down and stopping of distempered surfaces and applying two coat of distempered oil emulsion over 1mm thick wall care putty all as specified and directed. |
| 22 | Material and labour for preparing old distempered surfaces of wall and applying one coat of oil bound distemper all as specified and directed |
| 23 | Material and labour for washing rubbing down and scrapping of distempered and painted surfaces applying two coat of oil bound distemper all as specified and directed |
| 24 | M&L for Preparation of old white washed surface of wall and applying one coat of whitewash complete all as specified and directed. |
| 25 | M&L for Preparation of old white wash surfaces of ceiling and applying one coat of whitewash on ceiling complete all as specified and directed. |
| 26 | M & L for preparation of old plasterd surface of wall and ceiling, making the surface smooth by rubbing with emary paper and applying one coats of weather proof paint complete all as specified and directed. |
| 27 | Material and labour for preparation of old treatment on external surfaces of walls and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. |
| 28 | Preparation of old treated wooden surface and applying one varnish finishing coat with synthetic varnish etc complete all as specified and directed. |
| 29 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel all as specified and directed. |
| 30 | M&L for preparation of old steel surfaces of any description including washing and cleaning etc and applying two coats of synthetic enamel paint complete all specified and directed |
| 31 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 32 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 33 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 34 | Supplying and fixing custom-made display name board made of high-quality cast acrylic sheet of n exc 0.2 sqm & approved thickness (e.g., 3 mm to 5 mm base plate with 3 mm raised acrylic letters/logo). The work includes laser/CNC cutting of text and graphics as per approved design, bonding with specialized acrylic adhesive (chloroform/solvent cement), and fixing the board securely onto the wall or door using stainless steel/brass decorative studs and PVC rawl plugs, complete in all respects and as directed by the Engr-in-charge. |
| 35 | Supplying and fixing custom-made display name board made of high-quality cast acrylic sheet of n exc 0.05 sqm & approved thickness (e.g., 3 mm to 5 mm base plate with 3 mm raised acrylic letters/logo). The work includes laser/CNC cutting of text and graphics as per approved design, bonding with specialized acrylic adhesive (chloroform/solvent cement), and fixing the board securely onto the wall or door using stainless steel/brass decorative studs and PVC rawl plugs, complete in all respects and as directed by the Engr-in-charge. |
| 36 | Material and labour for cutting down plants /trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of extemnal walls of buildings, chajja, wall junctions, junctions of rain water / soil /waste vent pipes including taking out roots entered in wall/'slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed. |
| 37 | Dismantling of CI/PVC, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings etc complete all as specified and directed. |
| 38 | Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 39 | Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 40 | S & F mild steel bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-310-0 |
| 41 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 42 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation. |
| 43 | Dismantling of wall and ceiling board or insulation boards/slabs/blankets/any thickness including cover fillets |
| 44 | S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces completed all as specified and directed by Engr-in-Charge. |
| 45 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces completed all as specified and directed by Engr-in-Charge. |
| 46 | S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finials and decorative end supports etc complete all as directed” Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender