Tender For Restoration Work Of Office.
Tender Value
75.30 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
1.51 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Restoration Work Of Office.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse with in 60M. |
| 2 | Dismantling door window, including chowkhat, with hold fast and including stacking of dismanteld material, as directed by the engineer in charge with in a distance of 60 mtr. |
| 3 | Dismantling old cement concrete layer over the roof arches including base concrete and including stacking of dismentled material with in 60 M distance. |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position:Second class sal wood (SOR-9.1.2) |
| 5 | Supply and fixing of flush Doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.35mm thick.(SOR-470) |
| 6 | Providing and fixing 25 mm thick shutters for cup board etc.:Panelled or panelled & glazed shutters:Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws |
| 7 | 35 MM thick teack wood fram with fixing fly proof galvanised M.S. wire gauge to DOOR using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.With 2nd class teak wood beading 62X19 mm.(DSR 9.51.1) |
| 8 | P/F 25 mm thick teak wood window shutters partly wooden &Mosquito proof jali. |
| 9 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not included in an over all rates) wrought to required form, including of supply of steel, bolts, nuts and wastage etc. and its fixing required for proper completion of work.(SOR-502) |
| 10 | Earth work in foundation of partition boundry wall in dry ordinary soil including lift up to 1.5 meter and lead up to 30 meter including back filling, watering and ramming of excavated earth into the space between the structure and the sides of foundation trenches as directed by engineer-in-charge. |
| 11 | Laying 1:4:8 cement concrete in foundation with cement,coarse sand ,20 mm stone ballast including cost of materials , labour and T&P of all complete as directed by engineer-in-charge . |
| 12 | First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material,labour and T&P etc.required for proper completion of the work.(S.No.305) |
| 13 | Cement concrete with 2cm(11/2\\") gauge approved stone ballast,approved coarse sand and cement in the propotion of 4:2:1 including all material labour and T&P etc. required for proper completion of the work |
| 14 | R.C.C Work with cement approved coarse sand and 2cm(3/4\\") gauge approved stone ballast in the propotion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials , labour and T&P etc. quired for proper completion of the work.Binding wire cost being including in the item.(but for slab.) S.No.. . |
| 15 | 12mm thick plaster with cement and coarse sand of 1.25 F.M mortar in 1:4brickwork minimum thickness not to be less than 3/8\\" (10mm) thick including supply of all material labour and T&P etc. required for proper completion of the work. |
| 16 | Reinforcement including cutting , bending and binding including cost of all materials, labour and tools & Plants. |
| 17 | Providing and applying plaster of paris putty of 2.00 mm thickness over plastered surface to prepare the surface even & smooth complete. |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) ( for second coat after first coat of subsequent coat.) |
| 20 | Applying priming coat over new steel and other metal surface, new wood work, and plastered surface after and including preparing the surface thoroughly, cleaning oil, grease, dirt, and other foreign matter, scouring with wire brushes, fine steel/wood scrappers, sand papering, and knotting, followed by painting a first coat over the priming coat (excluding cost of priming coat) or on a previously painted old surface with superior synthetic enamel paint of superior quality, applied by brushing to give an even shade and finish, including cleaning the surface of all dirt, dust, and other foreign matter, sand papering, and stripping, as well as the cost of all materials, labour, T&P, etc. required for the proper completion of the work. (2coat painting over on one coat priming on new wood and steel surface with putty.) |
| 21 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration As per DSR. 2.35.3.1 |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm Granite stone slab colour black, Cherry/Ruby red.(Floor and Dado). |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) including grouting the joints with white cement and matching pigment etc. complete . Tile size 60 cm x 60 cm. |
| 24 | Earth work in embankment by power tranported earth with a lead beyond 200m. and upto 1.00 Km. including excavation, loading, unloading, manual compaction, dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. orders. |
| 25 | Providing and laying of factory made 80 mm thick interlocking cement concrete tile (30 mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joint with fine sand including the cost of materials, labour, T&P etc. required for proper completion of work as directed by engineer-in-charge. |
| 26 | Providing and fixing 600X450 mm bevelled edge mirror of super glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screw and washer complete. |
| 27 | Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast iron P or strap, 10 Ltr. Low level white P.V.C flushing cistern with manualy controlled device (Handle lever) confirming to IS:7231 with all fiting and fixtures complete including cutting and making good the walls and floor wherever required. White vitreous china orissa pattern W.C pan of size 580X440 mmwith integral type foot rest. |
| 28 | Providing and fixing white vetreous china flat back or wall corner lipped front urinal of 430X260X350 mm and 340X410X265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets,cutting and making good the walls and floor wherever required. One urinal basin with 5 ltr. white P.V.C automatic flushing cistern. |
| 29 | Providing and placing on terrace (at all floor levels) polyethyiene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support for tank. |
| 30 | Providing and fixing white vetreous china wash basin including making all connections but excluding the cost of fittings.flat back wash basin size 550X400 mm. |
| 31 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. 32 mm dia. (Semi rigid pipe) |
| 32 | Providing and fixing G.I pipe complete with G.I fittings and clamps including cutting and making good the walls etc. Linternal work exposed on wall. -15 mm dia nominal bore. |
| 33 | Providing and fixing G.I pipe complete with G.I fittings and clamps including cutting and making good the walls etc. Linternal work exposed on wall. - 20 mm dia nominal bore. |
| 34 | Providing and fixing C.P brass bib cock of approved quality confirming IS:8931. (i) 15 mm nominal bore. |
| 35 | Providing and fixing C.P brass stop cock(Conclealed) of standard design and of approved quality confirming IS:8931. (i) 15 mm nominal bore. |
| 36 | Providing and fixing C.P brass long body bib cock of approved quality confirming IS standard and weighing not less than 690 gms. (i) 15 mm nominal bore. |
| 37 | Providing and applying water proofing treatment to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer, solid content 30%+-3, pH >7) in the ratio of 1:2 (1 part of water proofing compound : 2 parts of cement by weight), followed by two coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1N/mm2 Topping layer of 25mm thick cement concrete 1:2:4 (to be paid separately) to be laid. |
| 38 | Providing and laying \\"Brick coba\\" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coase sand mixed with water proofing compoundfilled gaps of coba & tap of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall paraper shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour T&P etc. complete for proper comletion of work including all cost of material, labour & T&P etc. complete. |
| 39 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 40 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10mm |
| 41 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 |
| 42 | Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595 mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum)., comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing@120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600 mm centre to centre in a floor and ceiling channel section of size 50 x 32 mm fixed to the floor and soffit at 600 mm centre using 12 mm dia,50 mm long wedge type expanded zinc alloy dash fastner with 10 mm bolt. This same channel is then to be fixed inhoriziontal direction at 600 mm centre to centre so as to form a grid of 600 mm x 600 mm.Glasswool of 50 mm thickness is then to be inserted in the slots and finally calcium silicatenon combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50 mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. |
| 43 | Supplying,installation,Testing and commissioning of 2 Ton 5 star Daikin or equivalent air condition including piping ,electrical cableling ,controller etc, required for the system as per satisfaction of engineer-in-charge. |
| 44 | 15KW off-grid solar power system including 26 pannels(610 watt adani/Waaree/Non-DCR) structure ,15KW inverter(Off-grid), 20 Batteries(150AH),AC/DC wire (Polycab/Havells), earthing chemical bag,ACDB,DCDB,Transport and installation etc. as per required for completion of work as direction of engineer-in-charge. As per market rate. |
| 45 | Supplying and fixing of 2-seater modular workstation table with panel-based partitions, having overall size W 2580 mm x D 680 mm x H 1200 mm, featuring particle board tabletop with PVC edge-banded finish, equivalent to Geeken make, including all necessary accessories, fittings, drawing, and design, all complete as per the direction and satisfaction of the Engineer-in-Charge. |
| 46 | Supplying and fixing of 7-seater modular workstation table with panel-based partitions, having overall size W 1560 mm x D 1560 mm x H 1200 mm, featuring particle board tabletop with PVC edge-banded finish, equivalent to Geeken make, including all necessary accessories, fittings, drawing, and design, all complete as per the direction and satisfaction of the Engineer-in-Charge. |
| 47 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C(Light Point-46),(Fan Point-18),(Exhust Fan-5) |
| 48 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 49 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 50 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2X4 sq. mm + 1X4 sq. mm earth wire |
| 51 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 52 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2X10 sq. mm + 1 X 6 sq. mm earth wire |
| 53 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 54 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. |
| 55 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 56 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 57 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.-1 or 2 Module (75mmX75mm) |
| 58 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.-6 module (78mm X 205 mm X 50 mm) |
| 59 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.-25 mm |
| 60 | Supply, Installation, Testing and Commissioning of 9W Surface/Recessed Mounted LED Bulb |
| 61 | Supply & fixing of LED Tube Light witH Metal heavy duty Box type batten light fitting 1 x 22 watt suitable for upto 1X22W LED Polycarbonate tube light complete including tube etc on surface complete in all respects. |
| 62 | Supply & fixing of LED Tube Light witH Metal heavy duty Box type batten light fitting 2 x 22 watt suitable for upto 1X22W LED Polycarbonate tube light complete including tube etc on surface complete in all respects. |
| 63 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required -300mm sweep. |
| 64 | Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system-BEE 5 star rated-1200 mm sweep |
| 65 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. |
| 66 | Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 67 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. |
| 68 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 69 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-6 way, Double door |
| 70 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-8 way, Double door |
| 71 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-12 way, Double door |
| 72 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Single Pole |
| 73 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Single Pole Neutral |
| 74 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.-40 A |
| 75 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.-63 A |
| 76 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 77 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 78 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 79 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.-50 sqmm 3.5 core |
| 80 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.-16 sqmm 4 core |
| 81 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in-charge.-50 sqmm 3.5 core |
| 82 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in-charge-16 sqmm 4 core |
| 83 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.-50 sqmm |
| 84 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.-16 sqmm |
| 85 | S & F of surface/flush mounting 4 ways V TPN distribution board with additional door cithout MCB complete in all respect, as directed at site by Engineer in charge.CAT-A |
| 86 | S & F of 100 Amp 4P MCCB (25KA) Thermal Magnetic release.CAT-A |
| 87 | S & F of 63 Amp TP MCB (10KA) C Curve.CAT-A |
| 88 | Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.-1 or 2 Module (75mm X 75 mm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender