Tender For Construction Work Of Pre-Casted New Boundary Wall, Repair And Maintenance Work Of Existing Boundary Wall, Construction Work Of New Guard Room At Chaudhary Charan Singh, Inspection House, Gauribazar Deoria As Per Boq.
Tender Value
25.83 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
11 days left
EMD
52000
Bank guarantee accepted
Document Fee
354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Deoria → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Work Of Pre-Casted New Boundary Wall, Repair And Maintenance Work Of Existing Boundary Wall, Construction Work Of New Guard Room At Chaudhary Charan Singh, Inspection House, Gauribazar Deoria As Per Boq.
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Earth Work in digging foundation for boundary wall |
| 3 | Supply and Erection of precast RCC PANEL including Column of specification such as thickness of pannel 50mm , size of panel 2.5 mX 0.3 m , column size 175mmX 175 mm with grooves on both sides upto 2.4 m above GL and 0.6 m below GL without grooves inserted in cement concrete 1:2:4 footings of size 450 mm X 450mm and RCC PLINTH BEAMof size 300mm |
| 4 | Colour washing with lime on undercoated wall surface two coats over and including a primary coats of white washing to give an even shade after thoroughly brooming the surface to remove all dirt,dust,mortar drops and other foreign material |
| 5 | Earth Work with Proper dressing & Normal compaction of both side of boundary wall and campus |
| 6 | P/F top light bracket with G.I. pipe bend ,light button ,accessories etc. including cost of material and labour charges |
| 7 | P/F 1 mm thick MS SHEET DOOR with frame of 40x40x6 mm angle iron,3.15 mm thick M.S. gusset Plates and at the junction and corners ,including supply and fixing of necessary fittings, lock rail of 37.5cm length of oxidised iron and including pintels,hooks at the top and applying a priming coat of red lead paint on all sides complete. |
| 8 | Uprooting of Narkool/Moonja including proper disposal. |
| 9 | Earth Work in digging foundation for pillar |
| 10 | C.C1:4;8CM with brick ballast |
| 11 | 1st Class Brick Work 1:4CM in 23CM 50% new brick. |
| 12 | Dismentling of old cement plaster |
| 13 | Cement Plaster 1:4 CM with 12mm thick |
| 14 | Colour washing with lime on undercoated wall surface two coats over and including a primary coats of white washing to give an even shade after thoroughly brooming the surface to remove all dirt,dust,mortar drops and other foreign material |
| 15 | Earth Work with Proper dressing & Normal compaction of both side of boundary wall and campus |
| 16 | Dry E/Work in Foundation |
| 17 | C.C. in 1:4:8 CM with Brick Ballast |
| 18 | C.C in 1:2:4 CM with Stone Ballast |
| 19 | 1st B/W. in 1:4 CM (23Cm.) |
| 20 | Centering & Shuttering for R CC Work |
| 21 | Cement Plaster 1:4 CM |
| 22 | PROVIDING AND FDING PRECOATED GALVANISED JORN PROFILE SHEETS(SIZE, SHAPE AND PITCH OF CORRUGATION AS APPROVED BY ENGINEER IN CHARGE 50MM(+.05%) TOTAL COATED THIKNESS WITH ZINE COATING 120 GRAMS PER SOM AS PER IS:277, IN 240 MPA STEEL GRADE 5-7 MICRONS EPOXY PRIMER ON BOTH SIDE OF THE SHEET AND POLYESTER TOP COAT 15-18 MICRONS, SHEET SHOULD HAVE PROTECTIVE GUARD FIL OF 25 MICRONS MINIMUM TO AVOID SCRATCHES DURING TRANSPORTATION AND SHOULD BE SUPPORD IN SINGLE LENGH UP TO 12 MTR OR DESIRED BY ENGINEER IN CHAGE, THE SHEET SHALL BE FIXED USING SELF DRILLING/SEFT TAPPING SCREWS OF SIZE (5.5*55)WITH EPDM SEAL COMPLETE UPTO ANY PITCH IN HORIZONTAL/VERTICAL OR CURVED SURFACE, EXCLUDING THE COST OF PURLINS, RAFTERS AND TRUSSES AND INCLUDING CUTTING TO SIZE AND SHAPE WHEREVER REQUIRED.PWD SOR PAGE NO 23 ITEM NO 12.50 |
| 23 | white washing & colour washing of Guard Room in 2 coats |
| 24 | Distamper coating of Guard Room in 2 coats |
| 25 | M.S. Bar |
| 26 | Steel Door |
| 27 | Steel Window |
| 28 | Steel Ventilator |
| 29 | Painting of Door,Window, Ventilator, etc. |
| 30 | P/F 15 Ampere Main switch D.P. 5 Ampere switch 3 pin plug bulb holder, wooden board ,round block and angle holder etc for light wiring |
| 31 | Earth Work with Proper dressing & Normal compaction around Guard Room Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender