Tender For Renovation Of Public Toilet With Facilities For Persons With Disabilities (Pwd), Chc At Amini
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2026
0 days left
EMD
9966
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Public Toilet With Facilities For Persons With Disabilities (Pwd), Chc At Amini
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Brick work in superstructure above plinth level up to floor five level |
| 4 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet forplacingthe tiles gently and easily. Glazed Vertified tiles Matt/ antiskid finish Size of Tile 600 x 1200 mm |
| 7 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 8 | Providing and fixing white vitrous China wash basin with RS or CI bracket spainted white, 15mm C.P brass pillar tap and C.P brass chain and rubber plug 32mm, C.P brass waste of standard pattern 32mm diameter and wastepipe complete including cutting and making good the walls and floors where required. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps |
| 9 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 10 | Providing and fixing to existing door frames. 25mm thick PVC flush door shutters upto 737 mm width of colour and shade as approved by Engineer-in- charge made out of a one piece Multi chamber extruded PVC section of the size of 762mmX25mm or less as per requirement with an average wall thickness of 1m±0.3mm. PVC foam end cap of size23x10mm are provided on both vertical edges to ensure the over all thickness of 25mm. An MS tube having dimensions 19mmx19mm is inserted along the hinge side of the door. Core of the doorshutters hould be filled with High Density Polyurethanefoam. The Top & Bottom edges of the shutter are covered with an end-Cap of the size 25mmX11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures ’specification and drawing to take up necessary hardwar and fixtures. Stickers indicating the locations of hardware willbe pasted at appropriate places |
| 11 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.135.1 With 2nd class teak wood beading 62X19 mm |
| 12 | Providing and fixing stainless steel (Grade304) railing made of Hollow tubes, channels, platesetc. .including weldinggrinding, buffing, polishing and making curvature (whereverrequired) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc. .of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approva lof Engineer-in-charge (for payment purpose only weight of stainless steel members shallbe considered excluding fixing accessories such as nuts, bolts, fasteners etc..) |
| 13 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. Internal work. 25mm nominal bore |
| 14 | Providing and fixing G.M.full way wheel valve of approved quality and manufacture complete. 25mm nominal bore |
| 15 | Providing and fixing CP brass angle cock of approved quality and manufacture complete.20 mm |
| 16 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 17 | Providing and fixing health faucet of approved quality and manufacture complete. |
| 18 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 20 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (Exterior and interior). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender