Tender For Thanjavur District - Orathanadu-Pugf 2026-27- Providing 200Mm Dia Alternative Borewell,7.50Hp Motor And Pipe Line At Keela Theru In Athanakottai Panchayat.
Tender Value
9.75 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
8 days left
EMD
9800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thanjavur District - Orathanadu-Pugf 2026-27- Providing 200Mm Dia Alternative Borewell,7.50Hp Motor And Pipe Line At Keela Theru In Athanakottai Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Providing 200mm dia New Borewell,7.50HP Motor and Pipe Line at Keela Theru in Athanakottai Panchayat. |
| 2 | Conducting Geophysical survey for fixing the Location |
| 3 | DRILLING of borewells any where in Thanjavur District including transportation from one place to another within the above Districts in alluvial soil or sedimentary strata of clay and sand stone, shale, pebbles boulders etc. By first taking a pilot bore of 165mm / 200mm OD and then enlarging to required dia by direct or reverse rotary mud, circulation method, using Rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the Department officers including construction of mud pit. |
| 4 | Drilling of 200mm Dia Pilot Borewell |
| 5 | From 60m depth ending from the ground level |
| 6 | From 60m to 90m depth ending from the ground level |
| 7 | From 90m to 120m depth ending from the ground level |
| 8 | From 120m to 150m depth ending from the ground level |
| 9 | Reaming from 200mm dia Pilot bore to 350mm dia Borewell as directed by Departmental officers |
| 10 | Up to 60 M Depth ending from the ground level |
| 11 | From 60m to 90m depth ending from the ground level |
| 12 | From 90m to 120m depth ending from the ground level |
| 13 | From 120m to 150m depth ending from the ground level |
| 14 | Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc. complete. Supply and packing the annular space with pebbles of size and quality as approved by the Department officers |
| 15 | Charges for developing the bore wells with Air compressor of 600 CFM capacity (minimum 8 hours) including transportation labour and fuel charges for compressor as directed by Department officers and conducting yield test by \\"V'' Notch method. |
| 16 | Supplying and Delivery of following metrials as per specification |
| 17 | Supply and Delivery of unplasticised for plain PVC Casing pipes for the following dia in 3m length with screwed and Socket ends and centering guides for every 15m length of pipes as per IS 12818/1992 and as amended from time to time to suit deep borewells upto 80 m to 250m depth (CM) for delivery at site within ISI marking including loading unloading, freight, transit insurance and inclusive of all taxes etc complete.DN 200 mm OD PVC plain casing pipes. |
| 18 | Supply and Delivery of unplasticised for ribbed screen PVC Casing pipes for the following dia in 3 m length wtith screwed and socket ends and centering guide for every 15 m length of pipes as per IS 12818 /1992 and as amended from time to time to suit deep borewells for delivery at site within ISI marking including loading unloading, freight, transit insurance and inclusive of all taxes etc complete.DN 200 mm OD Ribbed screen pipe. |
| 19 | Supply and Delivery of 200 mm End Plug |
| 20 | Supply and Delivery of MS Clamp set |
| 21 | Supply and Delivery and fixing of DN 200mm OD MS Cover of size 1 cm x 3mm suitable for the above pipes with ISI marking inclusive of all taxes etc complete. |
| 22 | SUPPLY, DELIVERY AND ERECTION OF SUBMERSIBLE PUMPSETS FOR INDIVIDUAL POWER PUMP SCHEME ( BOREWELL ) |
| 23 | Supply and delivery of vertical wet type submersible pumpset (7.50HP) capable of discharging any of the following pumpset in having a duty of 200 LPM agaist a total head of 50 m suitable for erection into the Bore well of 225mm dia with stainless steel shaft, bronze impeller. 50x225 |
| 24 | Supply and delivery of wall mounting type control panel made up of M.S. sheet 18 SWG vermin proof, box type with hinged front door and fixed sides with inter locking facility etc., complete with internal wiring of control panel with provision for cable end |
| 25 | Supply and delivery of 1.1 KV grade 3 core PVC insulated 4.00 sq.mm copper flat submersible cable as per IS 694/1990 and with ISI marking of reputed make for submersible motor erected in the bore well. |
| 26 | Supply and delivery of GI pipes and specials as per relevant IS specification for Bore well listed below inserting GI Pipe pipe in wall, cement patch up etc, and as per drawing enclosed including cutting and threading of pipes. |
| 27 | 65 mm UPVC Column Pipe |
| 28 | 65 mm GI Pipe |
| 29 | 16 mm Nylone Rope for Borewell |
| 30 | 65mm GI Flange set |
| 31 | 65mm GI Elbow |
| 32 | 65mm MS clamp set |
| 33 | 65mm Non Return Valve |
| 34 | Labour charges for erection of submersible pump set in Bore well including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin erathing as per I.E Rules, GI wire etc. complete including testing pumpset. |
| 35 | Extention of Pipe Line 63mm |
| 36 | Earth work excavation and depositing on bank with initials lead of 10 m and initial llift of 2m in ordinary soils for a depth of 1.05 m and width of 0.60 m for Pipe Laying works |
| 37 | Supply and Unplasticised PVC Rigid Pipes adpe BIS |
| 38 | 63 mm OD PVC 4 ksc pipe Left |
| 39 | Conveyance of PVC rigid pipes with in a lead of 200m lowering into trenches laying to proper grade and alignment ,jointing with pvc spls. with cement paste, testing to the required pressure including conveyance of water upto 1km lead for filling during testing exclu ding the cost pipes& jointing materials.burst occurs during testing,it should be rectified at contractors own cost&as directed by Department officers |
| 40 | 63 mm OD PVC 4 ksc pipe Left |
| 41 | Refilling the trenches with excavated earth after pipes arelaid as directed by Department officers |
| 42 | 63 mm OD PVC 4 ksc pipe Left |
| 43 | Supply and delivery of following PVC/GI Specials |
| 44 | 63mm PVC Bend page 12 ,sl.no-3 |
| 45 | 63mm x50 mm PVC Tee IS 7834/1987 page 10 |
| 46 | 63mm End cap page 12 sl.no 11 |
| 47 | 63 mm dia PVC Elbow |
| 48 | 63mm Dia PVC Coupler |
| 49 | Provision for Plinth Protection |
| 50 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender