Tender For Repair & Maintenance Of 4 Nos Type-Ii Quarter For Hppwd Employees At Dhar Ur Distt. Mandi Hp ( Sh :- Repair Of Building Portion)
Tender Value
11.58 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
23200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of 4 Nos Type-Ii Quarter For Hppwd Employees At Dhar Ur Distt. Mandi Hp ( Sh :- Repair Of Building Portion)
BOQ
| Sl. No. | Item Description |
| 1 | Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 2 | In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels. |
| 3 | In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 5 | Providing and laying Twisted steel/deformed TMT and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding in foundation complete including the cost of binding wire all complete above plinth level upto all floor levels including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 6 | Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm ( forty centimetre into ninteen centimetre into twenty centimetre quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm ( twenty millimetre)nominal size) laid with cement mortar 1:6 (one cement : six sand) including curing complete in super structure upto floor two level. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying precast cement concrete hollow block masonry in partition wall 10 cm thick with cement concrete blocks of size 40cm x 10cm x20 cm ( forty centimetre into into ten centimetre into twenty centimetre) including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm( twenty millimetre) nominal size) laid with cement mortar 1:4 (one cement : four sand) including curing complete in super structure upto floor two level. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing panelled shutter for door panel filled with 12mm thick preliminated board phenol bonded particle board ISI marked IS No. 12823 of approved shade style 40mm thick finished side and top rail 200x40mm midde rail 150x40mm complete including blow enamelled iron bult hinges with necessary screw in all respect as per the specification and direction of Engineer in charges including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g (eighty five)with wire of dia 0.56 mm ( zero point five six millimetre)to windows and clerestory windows including 60x20 mm (sixty into twenty millimetre) beading of (2nd class deodar wood).including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 10 | Providing and fixing mild steel plain grills of required pattern in wooden/steel frames of window etc, with M.S. flats square bars with round headed bolts and nuts or by including carriage of materials within all leads and lifts and other incidentals charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 11 | Providing and fixing 20 mm (twenty millimetre) heavy type curtain rods of 1.25 mm ( one point two five millimetre) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete with end knobs as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour orshade, with nuts and screws etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 13 | 300×16mm (Three hundred into sixteen millimetre) nominal size |
| 14 | 250×16mm (Two hundred fifty into sixteen millimetre) nominal size |
| 15 | Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 16 | 250×10mm (Two hundred into ten millimetre) nominal size |
| 17 | 150×10mm (one hundred fifty into ten millimetre) nominal size |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 19 | 125mm (one hundred twenty five millimetres) |
| 20 | 100 mm (one hundred millimetres) |
| 21 | Providing and fixing oxidized MS single acting spring hinges 150mm (one hundred fifty milimeters) with necessary screw etc,complete including carriage of materials within all leads, and lifts and other incidentials charges .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 22 | Providing and fixing 150(One hundred fifty) millimetres M.S. bright finsihed hard drawn hooks eyes brass including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing 100mm ( One hundred milimetres ) bright finished brass floor door stopper with ruber cushion screws etc. complete complete including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 24 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg ( thirty six kilograme to eighty kilograme)and door width from 701 mm to 1000 mm)(seven hundred one millimetre to one thousand millimetre)with double speed adjustment with necessary accessories and screws etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 25 | Providing and laying 10mm (ten) millimetres thick Antiskid Full Body vitrified matt finish floor tiles of Size 600x600 mm(six hundred into six hundred)millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08% and conforming to IS: 15622, of approved make, olours and shades, laid on 20mm (twenty) millimetres thick cement mortar 1:4 (one cement : four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joints with white cement and matching pigments etc., complete including grouting the joints with white cement mixed with matching pigments etc. complete including all leads and lifts and carriage of material including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 26 | Providing and laying Antiskid Full Body vitrified floor tiles Premium quality-matt finish 600x600 mm(Six hundred into six hundred)millimetres of approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell /SIMPOLO / NITCO/ SOMANY with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve) millimetres thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Killogramme per square metres) including grouting the joint with white cement & matching pigments etc. complete in approved shade of Simplo ASIAN TILES/ JOHNSON tiles / Kajaria / Orient Bell/SIMPOLO/ NITCO/ SOMANY or its equivalent including all leads and lifts and carriage of material including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 27 | White glazed tiles 6 (six) millimetres thick made of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnson (30x45cm)(thirty into forty five millimetres) dado upto 150 cm(one hundred fifty centimetres) and dedo upto 205 cm ( Two hundred five centimetres ) height of johnson/nitco/orient-bell of approved shade in skrting riser of steps and dado laid on a bed of 12 (twelve ) millimetres thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 28 | Providing and laying 20mm (twenty millimetre) (average)thickness green marble in flooring base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 29 | Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet made of TATA,Durashine in roofing with hot dipped matallic Zinc coated sheet with the top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns 5 (five) micron over five micron's primer coating to back coat of polyster over 5 (five) microns primar coating including fixing with pre painted iron J or L hooks, bolts and nuts 6mm (six milimeters) dia meter with prepainted limpet and rubber washer complete with all accessories as equired as per the direction of Engineer-in Charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 30 | Providing and fixing flushing 38cm(Thirty eight centimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet made of tata durashine in roofing with hot dipped metallic Zink coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5(Five) microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 31 | Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA /JSW make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 32 | Structural steel work riveted, bolted or welded in builtup sections,, made of TATA, JINDAL, trusses and trussed, in purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing Single pattern door frame with angle made of TATA/ Durashine steel 40x40x4mm ( Forty into forty into four milimetres ) and mild steel flat 40x4mm ( Forty into four milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50X25 (Fifty into twenty five) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 34 | Providing and fixing angle iron cupboard frames made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura) manufactured from M.S.Angle iron section 25X25X5mm (Twenty five into Twenty five into five ) millimetres thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm (Twenty five into Twenty five ) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Twenty point five ) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 35 | Providing and fixing double rebate M.S channels in window frames manufactured from M.S. section 75mmx40 mm (Seventy five milimetres into forty millimeters)as per design drawing including hinges jamb, lock, jamb beed and if required angle thrashold of M.S. angle 50x25mm (Fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs with split end tail to each jamb including steel butt hinges 2.5mm (Two decimal five milimetres) thick with a provision of locking arrangement shock observers as specified and applying of approved steel primer including carriage of materials within all leads and lifts and other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 36 | Providing and fixing steel glazed door, windows and ventilators shutters of standard rolled steel sections made of tata joints mitred and iron fittings including providing and fixing of glass panes with glazing clips and special materials putty of approved make complete applying a priming coat of red lead paint including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 37 | Steel windows, fixed steel windows |
| 38 | Side hungs windows. |
| 39 | Providing and fixing steel wire gauge shutter in Z section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia 0.56mm for doors, windows and clerestory windows with metal beading of approved quality and shape -section with necessary screws and applying a coat of primer with red lead paint complete as per approved design.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 40 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen into ninteen) Millimetres square bar with a clear height of 85 (eighty five) centimetres embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm ( Fort into six) millimetres size complete and a applying priming coat of red lead paint upto all floor level in all heights complete including entire carriage of material with in all leads lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 41 | 6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 42 | 15mm (fifteen millimeters) cement plaster in single coat on the rough side of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentalsincluding carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 43 | Wall painting (two coats) with acrylic emulsion paint of Nerolac, Burger, (Bison Acrylic) Asian paints,(Tractor, Acrylic) and Shalimar of approved brand and manufacture having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams per litre for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 44 | Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima, Asian Paints ICI Dulux Gloss, Nerolac,Burger (luxolHigh Gloss,Premimum Apcolite Gloss & Shalimar manufacture) or its equivalents on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 45 | Providing and Applying painting two or more coats of oil type wood preservative ofI ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make on new wood and wood based surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 46 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make on new wood and wood based surfaces with ready mixed paint to give an even shade brushes including cleaning of all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint other than white complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 47 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (One point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (One point eight liters per ten square metre) of approved brand and manufactureICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make on new steel and new steel surface under coat with ready mixed paint brushes to give an evan shade including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 48 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 49 | 15 mm (Fifteen millimetres) nominal bore |
| 50 | 20 mm (twenty millimetres) nominal bore |
| 51 | 32 mm (thirty two millimetres) nominal bore |
| 52 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five into forty millimeters) nominal bore including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, No. CASCADE NXT C0207 universal type water closet 540x365x395mm ( Five hundred forty into three hundred sixty five into thre hundred ninety five millimeters) in white shade of Hindware or CERA or PERRYWARE with 10 (ten) litre low level snow white P.V.C. Twin flushing cistern of COMPASS Cat. No. S1053106 \\"S\\" trap with ceranglo deluxe seat cover of snow white shade of CERA/ JACQUAR(with fittings, accessories and flush pipe), with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 54 | Providing and fixing viterous China wash basin CASCADE NXT C0404 Basin With Half Pedastal C0379 In White Shade of superime quality Parryware, Hindware Sanitaryware, Neycer, Cera including cutting holes & making good the same and carriage of materials within all leads and lifts of Parryware, Hindware Sanitaryware, Neycer, Cera. make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 55 | Providing and fixing Health Faucet Kit(Flexible hose, handset and brackets with flow rate 11.65 (eleven point six five) L/min.(Catelogue No. F8030301) brass body with wall hook and 1.00 (one) metre SS braided rubber hose pipe ,of CERA/ JAQUAR/ SOMANY including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 56 | Providing and fixing Stainless Steel A ISI 304 (18/8) (eighteen/ eight) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimeters) including painting of fittings and brackets, cutting and making good the walls wherever required : Sink No. REK 1916 of overall size 480x405mm (four hundred eighty into four hundred five millimeters) of Diamond sinks including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 57 | Providing and fixing 32 mm (thirty two millimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 58 | Providing and fixing flexible connection pipe with brass unions : 45cm (forty five centimeters) length 15mm (fifteen millimeters) nominal bore of FINOLEX/SUPREME/JAQUAR including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 59 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass (ENOTICA)of approved quality complete with 6 mm (six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 60 | Providing and fixing C.P. brass long nose bib cock Cat No. CON 107 KNof approved quality conforming to IS standards and weighing not less than 690 gms(six hundred ninety grammes) 15 mm (fifteen millimeters) nominal bore including entire carriage of material within all leads and lifts and other incidentals. as per direction of Engineer-in-Charge |
| 61 | Providing and fixing Swan neck pillar Tap with left hand operating knob single control CON CHR 123BKN of 15 mm ( fifteen millimetre) nominal bore including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 62 | Providing and fixing CP Brass pillar tap with capstan head of 15mm (Fifteen millimetres) dia of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 63 | Providing and fixing angular stop cock with wall flange (JAQUAR -COP-057PM ) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 64 | Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of jaquar or equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 65 | Providing and fixing soap Dish Holder ACN-1131 N of JAQUAR including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 66 | Providing and fixing Towel rack 600 mm (six hundred millimetre) long with out lower hangers but with three hooks , stainless steel of ACN-1181S complete in all respect including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 67 | Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS of superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 68 | Providing and fixing Glass shelf 550 mm (five hundred fifty millimetres) long with C.P. Brass bracket and guard rail no. AQN-7771 of Jaquar fixed with C.P. Brass screws etc complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 69 | Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of nominal bore of ZOLOTO including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and t he direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 70 | 25 mm (twenty five millimeters) |
| 71 | 20 mm (twenty millimeters) |
| 72 | Providing and fixing G.I. Union in G.I. pipe of Unik, KS, AMCO, AVR, NVR, RR, SUW make including cutting and threading the pipe and making long screws etc. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 73 | 20mm (Twenty ) millimetres nominal bore |
| 74 | 25mm (Twenty five ) millimetres nominal bore |
| 75 | 32mm (Thirty two ) millimetres nominal bore |
| 76 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 77 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Finolex/Supreme/Astral make or equivelent ISI marked working pressure not less than 4.5(four point five)kilogram per square centimeter including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 78 | 150 mm (one hundred fifty millimeters) dia. |
| 79 | 110 mm (one hundred ten millimeters) dia. |
| 80 | Providing and fixing 110 mm X 90 mm (one hundred ten into ninety millimeters) make SUPREME/ ASTRAL/FINOLEX pvc floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 81 | Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts SUPREME/ ASTRAL/FINOLEX make complete including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 82 | 150 mm (one hundred fifty millimeters) dia. |
| 83 | 110 mm (one hundred ten millimeters) dia. |
| 84 | Providing and fixing a PVC plain bends ISI marked of SUPREME/ ASTRAL/FINOLEX make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 85 | 150 mm (one hundred fifty millimeters) dia. |
| 86 | 110 mm (one hundred ten millimeters) dia. |
| 87 | Providing and fixing PVC plain double equal branch ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 88 | II) 150mm (one hundred fifty millimetre) dia |
| 89 | I) 110mm (one hundred ten millimetre) dia |
| 90 | Providing and fixing PVC single equal branch with oval access door of SUPREME/ ASTRAL/FINOLEX make with insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 91 | 150 mm (one hundred fifty millimeters) dia. |
| 92 | 110 mm (one hundred ten millimeters) dia. |
| 93 | Providing and fixing PVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 94 | I) 110mm (one hundred ten millimetre) dia |
| 95 | II) 150mm (one hundred fifty millimetre) dia |
| 96 | Providing and fixing PVC Clamp ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 97 | I) 110mm (one hundred ten millimetre) dia |
| 98 | II) 150mm (one hundred fifty millimetre) dia |
| 99 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (eighty degree centigrade), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 100 | 2532 (32 mm) ( thirty two millimetre) OD Pipe ) |
| 101 | 2025 ( 25 mm OD ) (twenty five millimetre)Pipe |
| 102 | 1216 (one thousand two hundred sixteen) 16 mm OD ( Sixteen millimeters outer dia pipe) |
| 103 | 1620 (one thousand six hundred twenty) 20 mm OD( twenty millimeters outer dia pipe ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender