Tender For Construction Of Libraray Building At Tangdar
Tender Value
63.12 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
8 days left
EMD
1.26 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Libraray Building At Tangdar
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of JCB for for Clearence of site including disposal of same, all complete job |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 3 | Supplying and laying of stone soling hand packed tightly including ramming, watering. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal Size) |
| 5 | Providing and laying in position specified Grade of Reinforced cement concrete excluding the cost of centring, shutering and finishing of all work.1:1.5:3(1 Cement : 1.5 Coarse sand : 3 Graded stone aggregates 20 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:3:6 (1Cement: 3 fine sand: 6 graded stone aggregate 20mm nominal Size) |
| 7 | Centering and shuttering including strutting propping etc. and removal of form work; Foundations, footings, bases of columns, mass concreting. |
| 8 | Centering and shuttering including strutting propping etc. and removal of form workSuspended Floors/ Beams |
| 9 | Providing and Laying Damp Proof course 50 mm thick with cement mortar in 1:2:4 mix, 20mm nominal size of aggregate and curing complete. |
| 10 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5'x5' |
| 11 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:4 (1 Cement : 4 Coarse sand) (including Extra Brick Work) |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 14 | Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position.KD wood |
| 15 | Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. (KD) |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick |
| 17 | Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood |
| 18 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : 150 mm tower Bolts (D) |
| 19 | 100mm tower Bolt(W/V) |
| 20 | Link/Godrej Al Drop Locktype |
| 21 | Simple Aldrop |
| 22 | 125 mm Handle |
| 23 | 100mm Handle |
| 24 | bright finished brass hard drawn hooks and eyes 150 mm |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 26 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. TMT bars |
| 27 | Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 28 | Supplying and filling in plinth with fine sand /Nallah Muck/ Boulders under floors including watering rammiing ,consolidating and dressing , carriage complete job |
| 29 | 12 mm thick plaster in Cement Mortar 1:6 mix. |
| 30 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 31 | 6 mm thick plaster in Cement Mortar 1:3 mix.(Ceiling) |
| 32 | Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc. |
| 33 | Providing C.G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 34 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 35 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 37 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 38 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shade except begundy, bottle green, black of any size as approved by Eningeer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 39 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.,complete. |
| 40 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 41 | Providing and fixing PPR pipes complete with fittings and clamps including cutting chases and making good the walls etc, 16 mm dia |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes i/c ball cock |
| 43 | Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore |
| 44 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 46 | p/f of 50 litre capacity geyser of approved quality and make complete job |
| 47 | P/F Door Tee 100 mm dia PVC of Approved make type B |
| 48 | P/F Plain Bend 100 mm dia PVC of Approved make type B |
| 49 | P/F 100 mm dia PVC Collar of Approved make type B |
| 50 | P/F 75 mm dia PVC Collar of Approved make type B |
| 51 | P/F Soil Waste Disposal Pipes 100 mm complete job |
| 52 | P/F Soil Waste vent Pipes 75 mm complete job |
| 53 | P/F PVC cowel cover over vent pipe of approved quality |
| 54 | P/F 100x75 mm reducer PVC of approved quality |
| 55 | P/F MS stays and clamps for pvs pipes 75 mm |
| 56 | P/F Brass angle valve of approved quality |
| 57 | Providing and fixing brass bib cock of approved quality.20 mm nominal size |
| 58 | P/F of lighting points/charging points which shall incl wiring for lighting points in 1.5 sq mm PVC insulated multi strand copper wire & 2.5 sq mm PVC insulated multistrand copper wire for lighting submains, 6 amp oneway switch, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job ALONG With concealed lump of standard brand. |
| 59 | P/F of Heating points which shall incl wiring in 2.5 sq mm PVC insulated multi strand copper wire & 4 sq mm PVC insulated multistrand copper wire for heating submains, 16 amp switch socket combined , 2mm thick PVC conduit with bends, junction boxes etc 10 Amp S pole MCB, , 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 60 | P/F of Fanpoints which shall incl wiring for fan points in 1.5 sq mm PVC insulated multi strand copper wire,1200 mm ceiling fan with ceiling rose& PVC Square block 350 watt electronic fan dimmer, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 61 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted complete alsoHeavy wiring main line from the pole complete job as required by site engineer |
| 62 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement with lock, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design |
| 63 | Carriage of different material from nearest source to site of work. Stone /sand agg 40mm / 20 mm & sand Avg lead of 15 Km. |
| 64 | Carriage of Sand only 15 km MT |
| 65 | Bricks from Av lead of 200 Km by MT |
| 66 | Supply installation and commissioning of 2000VA solatubular inverter of approved brand and make with two 200AH capacity battery and required 160Watt solar panels, including all fittings and fixtures and as per the directions of engineer in charge, complete job. |
| 67 | Providing and fixing of 1.5 Ton capacity AC of approved brand and make, including 4kVA stablizer . including all fittings and fixtures and as per the directions of engineer in charge, complete job. |
| 68 | P/F of Khatamband Panelling with 12mm thick ply bedding in stepped manner and design pattern as directed by the engineer in chaarge on cieling including cost of alumunium farme work and other fixtures cj |
| 69 | P/F of wooden Panelling with 12mm thick ply bedding with a design pattern as directed by the engineer in chaarge on cieling including all fixtures complete job |
| 70 | Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. MDF board IS: 1998 marked 18 mm thick I/C cost of PVC beading(cut edges) as reqiuired |
| 71 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: 75mm |
| 72 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 73 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) |
| 74 | Providing aqnd supplying of Revolving office chairs of approved make and satndarad quality and as per directions of Engineer in charge all carrraige and fixtures complete job |
| 75 | Providing aqnd supplying of Executive table of approved make and satndarad quality and as per directions of Engineer in charge all carrraige and fixtures complete job |
| 76 | Providing and fixing ACP LED board with acrylic letters displaying the name of the Library including all fittings, wiring, and installation complete as directed by the Engineer-in-Charge all complete job. |
| 77 | Providing and fixing of book racks atleast 1'-0'' deep with 19mm plywood as directed by the Engineer-in-Charge inc all carriages a complete job. |
| 78 | Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone |
| 79 | P/F 8 mm thick prelaminated wooden flooring of approved brand and make incl all fittings and fixtures such as thermocol, edge corniece all fixture fittings as per the direction of engineer incharge etc complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender