Tender For Construction Of Entrance Gate, External Development, Illumination And Other Allied Works Of Sewa Bhavan C Us, Diu.
Tender Value
1.40 Crore
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
2.80 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Entrance Gate, External Development, Illumination And Other Allied Works Of Sewa Bhavan C Us, Diu.
BOQ
| Sl. No. | Item Description |
| 1 | Works |
| 2 | Providing and laying cement concrete 1:4:8 (1- Cement : 4- Coarse sand : 8- Graded Brick bats aggregate 40mm noral size) and curing complete excluding cost of formwork in (A) Foundation and Plinth |
| 3 | White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete. |
| 4 | Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand |
| 5 | Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. |
| 6 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. |
| 7 | Providing and fixing cladding with White sand stone - 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding, priming coat of Zinc primer and painted with two or more coats of epoxy paint etc. and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge etc. complete. |
| 8 | Finishing wall with weather proof exterior Texture Paint of approved brand (APEX or equivalent) on wall surface (min. two coats) to give an required Texture and Shade as per approved Architectural Elevations after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete as per the instructions of Architect and Engineer In-charge. |
| 9 | Providing and fixing pre-cast shotblasted paver block 60mm thick with grade of concrete M300 pneumatic compressed / vibrated mechanically and as per approved design confirming to IS 15658 : 2006 including 35mm sand layer for levelling and filling the joint with sand in proper line and level as per guidelines of IRC : SP 63-2018 etc. complete and as directed by EIC.Approved Makes of cement: Larsen & Turbo, Gujarat, Vikram, Binani or any other make as approved by the chief engineer. Approved Makes of Interlock Blocks: Dalal tiles,Unistone,Modern, Vyara or any other make as approved by the chief engineer.1) Triangular Blocks |
| 10 | Providing, Fabricating and fixing Steel Works in required pattern/ design for Safety Grills, Railing, Facade works, etc. using cast iron as per details/ drawings/instructions of Architect and Engineer In-charge including cutting, bending, jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position etc. complete for all levels as directed. |
| 11 | Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. |
| 12 | Supplying, stacking and spreading of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 13 | Providing(including loading, unloading) and Planting saplings of plants/ trees (10'-12' height and girth size 60mm-80mm) in the proper beds as prepared , and maintaining the same for Two months by involving all the operations like multing, de-weeding , hoeing , forking, watering and application of chemical fertilizer, insecticides/pesticides etc. for the following trees/ plants (the pit shall be filled with fresh soil and manure, i.e as stacked at site,Digging holes in ordinary soil and carting away the excavated earth and refilling the holes with the fresh soil mixed with manure or in the ratio of 2 : 1 by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed.Holes 0.9 m dia and 0.9 m deep. Plantation sample as selected by the Landscape Architect. Pongamia pinnata |
| 14 | Providing(including loading, unloading) and Planting the hedges/shrubs (min. 2'-3' height and girth size 8mm-12mm) approx 10-12 plants per sq mtrs, border plants as mentioned below including making pits/trenches suitably to implant shrubs, including filling the fresh earth and manure and maintaining the same for Two months involving all the operations like multching , de- weeding ,hoeing, forking , application of chemical fertilizer ,insecticides / pesticides and trimming in proper shape.Digging holes in ordinary soil and carting away the excavated earth and refilling the holes with the fresh soil mixed with manure or in the ratio of 2 : 1 by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed.Holes 0.3 m dia and 0.3 m deep. Plantation sample as selected by the Landscape Architect.Pandamus Baptisti \\"variegated\\" |
| 15 | Supply, Installation, Testing and Commissioning of IP66, IK07, modern single arm type decorative 6 Mtr. die cast aluminium pole of 100mm (round/square shape) including following specifications: Die cast EN-AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws. Clear toughned glass 6mm thick. single cable entry and gormmet. Silicon gasket. Double powder paint. 150mm dia base plate with necessary bolts and fittings. Buried in ground upto 600mm depth. Powder coated as per approved colour with weather proof coat. All required cable connection with suitable MCB mounting inside the pole. |
| 16 | Supply, Installation, Testing and Commissioning of IP66, IK07, modern single arm type decorative 6 Mtr. die cast aluminium pole of 100mm (round/square shape) including following specifications: Die cast EN-AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws. Clear toughned glass 6mm thick. single cable entry and gormmet. Silicon gasket. Double powder paint. 150mm dia base plate with necessary bolts and fittings. Buried in ground upto 600mm depth. Powder coated as per approved colour with weather proof coat. All required cable connection with suitable MCB mounting inside the pole. |
| 17 | Supply, Installation, Testing and Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO termination in face Plate for mounting IO. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender